C6-01 usb modem hardware device

Similar Questions

• computer fails to install the hardware device connected to USB

  computer recognizes the new device but said device is configured incorrectly (code i1) It does not install the driver for the device. The USB port works OK with a mouse and a printer. It will not install the items include a wireless, software modem mobile camera and flash drives. All these work OK on another computer. It seems that for some reason any driver is not installed when connected to the defective computer. The driver file to be installed is c:\windows\system32\drivers\usbstor.sys

  Hi dorothy.k,

  1. did you of recent changes on the computer?

  2. What is the exact error message that you receive when connect you these devices to the computer?

  3 - is the first time that you connect these devices to the computer?

  4. the other computer have also Windows XP installed?

  Method 1

  See the link below and run the fixit tool available, check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2

  Check the status of the device to the computer by using the Device Manager and later, see the Microsoft article below and according to the error code try the steps mentioned in the article.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

• Satellite L505-112 - 31 error code in device USB modem Manager

  I have a USB stick modem: Huawei e172. I downloaded the latest drivers for Windows 7 64 bit. I have a Nokia n95 with firmaware update to version 30 and the latest drivers...

  Is causing me this problem in Windows 7:
  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  To start I have the problem with the huawei e172. After the update of the Nokia n95, I have the same problem with this phone.

  Excuse me for my English but I'm from the Italy.
  Technical support Microsoft tell me that the problem is on the Toshiba Windows 7. In fact, if I try the modem usb stick on another pc with Windows 7 64 bit it works fine.

  Hello

  It's really hard to say what causes this problem on your laptop. Do you use the same drivers on the other PC?

  Are you running the factory settings or you have installed your own version?

  In your case, I'll try to update the chipset drivers on and BIOS. The two you can find on the Toshiba site.

  Alternative you should contact the manufacture of your USB modem. Maybe they can tell you more

• USB keyboard & mouse error "Windows cannot start this hardware device - code 19.

  Original title - USB keyboard & mice problem

  Hello

  I'm under 64-bit Windows 8.

  Problem: Keyboard Logitech wireless & mouse (S520) does not work.

  1 week ago that I tried my HARD drive on different USB ports on my PC. I disconnected the keyboard and mouse wireless receiver and reconnected. Since then he has stopped working.

  In Device Manager, it has a typical yellow marks against HID keyboard and mouse. I tried to uninstall and reinstall, off and on, makes no difference.

  When I go into the properties by right-clicking, the status is 'Windows cannot start this hardware device Code 19'.

  I tried Googling this error but I found that the solution is only for CD/DVD problems.

  I uninstalled USB Root Hub that is not made any change in the problem.

  Have restarted severl times and power disconnected from the PC and thus reloaded.

  I am currently my PC from iPad using the app Splashtop.

  I really hope that someone can help me.

  I've restored my windows from 16 April that solved the problem. However, I learned a lot about the registry keys and all.

  Thank you for taking the time from your busy schadule and answer my stupid questions.

  Thank you.

• USB 3 doesn't work does not Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  ASUS sabertooth z77 motherboard, bios updated. USB 2 USB 3 does not work. Have uninstalled root hubs that show problems and restarted the computer, do not solve the problem, still getting the "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "message under properties. Specific location of the hub of the problem: ASMedia USB 3.0 eXtensible Host Controller - 0096 (Microsoft).

  Please notify. If it is a regedit fix, please help with details. Thank you!

  When I rebuilt my system, I went step by step in reinstalling the software.  I understand that better, my usb problems related to Asus motherboard utilities.  These are not entirely compatible Windows 8 and introduce problematic drivers.  Finished to start my Acronis True Image boot USB and backup of backup image of this morning.  Problem solved.

  Staying away the Asus utilities for now... btw, Asus technical support on my problems was totally useless, even if the code 19 errors point to hardware problems, which are covered by the guarantee.

  If you use the Asus utilities, you may be able to rebuilt without them...

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L300 - USB modem now reported as unavailable

  I have a laptop Satellite L300, of Vista / Factory - I use a USB Modem to connect to the internet (this usb modem worked perfectly on the laptop until recently and still works perfectly on my PC - so not defective)

  I now receive messages (all 3 usb ports) that State the: the modem we unavailable

  Other usb devices IE mouse, keydrive etc seem to be fine

  I uninstalled the drivers USB, rebooted, checked for hardware changes and rebooted. But still does not connect to the internet.

  Does anyone have a solution?

  Hi Debzs,

  Can you try to remove the modem drivers, please? After that, restart your computer and install the latest drivers for modem manufacturing.
  Check this box!

  Also if other devices are working properly, theoretically it could be a hardware failure on your modem :(

• Locked up/hang up when you use a USB modem.

  Hi all, these days I have a problem with my laptop.

  When I connect a USB modem to my laptop and surfing the internet for a while, suddenly my laptopcomputer became unusable. I tried to shut it down via power button, but instead of 'sleep', he still appeared on the screen of my last and cannot be used at all. Then, as the second best, I removed the battery charger and the power then restart.

  I tried some actions: pass my firewall to Windows Firewall, using my modem with charger unplugged, scanned my laptop for malware (my laptop has been infected before, but now is healed), register of defragting and so on, but none succeeded.

  For information, here are the products that I use:
  1 Dell Inspiron with Core 2 Duo, 2 GB of RAM and nVidia GeForce 9300 M GS 512 MB
  2 HSDPA USB mOdem Huawei E226
  3 PC Tools Firewall more
  4 Auslogics and Registry Clean Expert (register defragtors)
  5. IT IS IE 8
  6. AVG 8.5 and Ad Aware (the latter not having active Ad-Watch)

  If anyone knows how to do this topic so I'm glad to hear it.
  Thank you.

  EDIT: this situation persists once a day I use my modem daily.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - device - Modems Double click top - tab of the driver manager - click on update drivers (this will
  likely to do anything that MS is far behind the certification of drivers) - then right click on uninstall

  Continue:

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• the d-link DWM-156 3g usb modem driver

  Hi, after upgrading to windows 8 Windows 7 my modem d-link dwm-156 usb not detected. How can it be resolved?

  Hi rahman hamed,.

  Thanks for posting in the Microsoft Community Forums.

  We're here to help and guide you in the right direction.

  1. you receive an error message?
  2 have you tried another USB port USB modem?

  Try the steps to solve the problem.

  Method 1:
  Run the troubleshooter of material and check.

  Follow the steps to run the Troubleshooter:
  a. press Windows + C keys on your keyboard to show the charms.
  b. type troubleshooting, and then click solving problems under settings.
  c. now, type Hardware Troubleshooter in the search option.
  d. click convenience hardware store to run the troubleshooter.

  Method 2:
  You can uninstall and re-installation of software

  a. uninstall the USB Modem in control panel software.
  b. Insert the USB Modem and install the software when it prompts.
  c. restart the computer and check with the question.

  Method 3:

  You can update the latest drivers for usb modem for Windows 8 on the manufacturer's Web site and check.
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  If no driver Windows 8 then, you try to install the driver in compatibility mode.

  (a) right click on the driver configuration file, and then select Properties.

  b) click on the Compatibility tab, check the following box to run this program in compatibility mode for and select Windows 7

  (c) in the drop-down list. then try to install the device driver using run as administrator.

  Response with more information to help you. Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Installation question on Satellite M30 PSM30E USB mass storage device

  Hi people,

  I get an error message when I try to install new hardware on my laptop. Windows XP is trying to find the drivers and then comes up with the following error after a few minutes. The software starts to install but then comes with the following text:

  "There was a problem installing this device:"

  USB mass storage device
  An error occurred during the installation of the device
  These data are incorrect

  What happened with a USB card reader and my mobile. Once I have the error box I get a message saying that the device will not work properly?

  Anyone has any ideas at all?

  See you soon

  Hello

  What series of notebook or laptop model do you have?
  Could you please put the whole number? It would be very useful for further study.

  All the installation driver Toshiba must be made in the right order.
  In most cases, you would find a txt file of installation instruction on the Toshiba driver page.
  You must follow these instructions to ensure that all drivers would be executed correctly.

  Concerning

• Satellite M110: The USB Modem broadband wireless fails to install

  Hi all

  I have a satellite M110 machine under XP SP3.

  I've tried two different brands of wireless USB modems. The two installation the corectly modem drivers and Device Manager shows this. However, pilots of Port of Coms do not install. The installation wizard displays the message "driver did not install correctly, Access is denied."

  Modem providers cannot explain failure given that the modems will work on my desktop machine (vista) without any questions just plug-and-play so to speak.

  I tried-

  (1) disable all anitvirus programs and firewalls.
  (2) deactivation or deletion of all other modems and internet connections
  (3) update BIOS
  (4) restart completed after all the above steps
  (5) verified all the drivers are the latest and the greatest part up to date.

  Returning the status 'out of box' re-loading of windows is not an option I've run a number of programs on my machine that are no longer available in the format that I use in my business. A suggestion was made by a tech Windows registry values are incorrect and are blocking the installation?

  You said, that the Wireless USB modem works on your desktop with Vista. Modems supported by Windows XP or Windows XP SP3?
  I would like to do a downgrade to SP2.

  In addition, I think that the best way would be a reinstall of Windows. If it s not an option, try it on another HARD drive in the laptop.
  You don't, so no risk of losing your data.

• Flag 23: HP Pavilion 23 - USB Modem is not compatible with this version of Windows.

  I just got a message saying that the USB Modem is not compatible with this version of Windows. I use a wireless router. What's to worry?

  It is not the number of product that I asked.

  You can find it in a number of places.

  (1) BIOS--> information system tab

  (2) HP Support Assistant at the bottom of the window HPSA.

  If you do not experience a problem marketing online then is there really a problem at all?

  Check in the Device Manager to see if there is a peripheral usb modem it without a driver installed. If it's a real modem, as in for telephone line connection, it isn't something you need to worry.

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• Y410 Ubuntu 10.4 and Huwaei E153 hsdpa usb modem

  Hello

  IM using lenovo y410 with ubuntu 10.04. I bought the new Huwaei E153 hsdpa usb modem. But it shows as usb storage device. I can't install to use it as modem hsdpa. Please ask me... How to install this modem.

  Thank you

  http://UbuntuForums.org/showthread.php?t=715810

  http://UbuntuForums.org/search.php?SearchId=77668988

• USB controller: unknown device next to a yellow question mark

  Hello

  Middle of last year had a system has crashed, rebuilt and has worked well since then.

  Done only USB connections since then has been with my tablet to transfer images.

  Before the crash, he worked well with connection to the solution Conon EOS Utility Desktop software to transfer images from the camera to the PC.

  Given that rebuilt have not used this feature, but he tried a few days back it does not recognize the Original title:

  USB controller

  connection. Again I tried to use a USB SD card reader, but no luck.

  Two working elements the Tablet and a regular USB.

  There is a yellow question mark in front of the USB controller in the section other devices. Tried to reinstall error can't find.

  Not able to use the original CD from Dell, as all drivers are for SP1 and I'm Noah on SP3 version 5.1

  Any help would be greatly appreciated.

  Kind regards.

  Ken

  Hi Ken,

  You can visit the manufacturer's website and update the chipset drivers.

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

   
  He will deal with the issue.