Cable HDMI to Toshiba GigaShot 40

Similar Questions

• Toshiba Gigashot GSC - K40HE HD - playback of MP4 files

  Need help please.

  I have a Toshiba Gigashot GSC-K40HE HD camera and have bought an Iomega screenplay Plus HD Media Player, essentially a hard disk of 1 TB with the ability to play MP4 files that the GSC-K40HE produced through the HDMI cable to my TV. (http://www.iomega.com/support/manuals/hdd2009/scrnplyplus/en/main.html)

  The files have been tranfered successfully at the scenario of Media Player, checked through my cell phone, MP4 files will open correctly.

  However when connecting the screenplay Plus HD Media Player to the TV with the HDMI cable, when you select MP4 files a message appears as "Unknown file" and not only will not open.

  My questions are:

  1. Why will not play MP4 files?
  2 is there a different format they need to be saved in for them to play, if so what those
  3 looking at files in camera HD of GSC-K40HE there is a simultaneous "THM" generated with the MP4 file when a video was taken, what is this and that affect playback via the screenplay multimedia drive?
  4 someone know of a storage device similar to the scenario Media Plus I can just copy and store my videos, plug-and-play through my TV without the above events.

  Look forward to your responses.

  Thank you

  Hey Buddy,

  If you can open the files saved on your laptop videos are ok and it s no video corrupted don't file, so in my opinion, the problem must be the external HARD disk where you store the videos.

  Have you tried different videos not the camera? You should test it with other mp4 files and other types of files to ensure that the external HARD drive is working properly.

  If it of necessary would directly contact Iomega. There may be an update of firmware for this media player or some settings you need to check these videos work.
  I would also try another cable.

• HDMI / HDMI to Toshiba large computer screen does not just work... why?

  Laptop will use a HDMI to Toshiba cable with no problems...

  HP ENVY 23 will use a HDMI cable and have problems with Toshiba...

  The HP ENVY 23 is compatible with the Toshiba...

  Geek Squad said that they were able to connect using an HDMI cable... little matter!

  Thanks for all the support

  sudsE

  I found the post with the same question... YEAR and NOT INTRODUITS HDMI OUTPUT port only...

• Cables HDMI Apple work - others do not?

  After struggling for several days, trying to use a new Air 2 with an adapter of lightning AV HDMI Out WITHOUT success, I joined the forum to get answers. Of course, I tried two HDMI cables different and two tv sets different. Of course, I replaced the Digital AV adapter and resumed the trial, and then finally it came down to visit the Apple store 35 miles!

  Their trial has proved that the HDMI cable I own and brought with me was the problem, because as soon as they hung one of their HDMI cables - voila! The display was evident on their TV.

  In addition to the thickness of the Apple being less than the standard HDMI cable HDMI cable, I am owner and see available all the time, what special "magic" exists inside the Apple HDMI cable to get an Air 2 using a lightning AV adapter to work?

  In case you ask each of the two HDMI cables I own and used in my first attempts are both viable and have been successfully Imaging my HD camcorder to a TV and other manifestations of LCD projectors.

  I want to learn!

  $20. investor in yet another cable HDMI that seems only available at Apple.

  He must take over the hdmi 1.3 or better according to me, like the tv

• Toshiba Gigashot K40 - delay on the sound

  Hello

  I have a K40 Gigashot camcorder
  The file on a hard disk, 1280x720p .mp4
  When I copy the file on my computer and play the video, it is very slow with a delay on the sound.
  I tested on 3 computers and it's the same thing

  Can you help me please?

  And can you tell me if Toshiba Gigashot K40 firmware update?

  Thank you

  Hello

  Have you tried different players?

  I've got a camcorder manufacturer, anthers and had a similar problem.
  I think only the problem is that the camcorder high-definition audio and video recordings, but some players don t stand that perfectly.

  I now use the Nero player with a digital extension. He plays very well. I also crazy good experience with the VLC media player.

• Toshiba Gigashot GSC-A40FE - error (004)

  Hello

  I just bought the Toshiba Gigashot GSC-A40FE.
  When you first start, I put the time and date on the camcorder and after I was finished I get the error message 'error' (004)
  So I tried to restart the camera but I get the same error every time. Can someone help me with this error?

  Best looks and thanks in advance for your answers

  Julian

  Hello

  Have you tried to update the firmware?

  You can find the latest update on the European driver Toshiba page;

  Choose: Options-> Digital Imaging-> Digital video cameras-> Gigashot a series

  You will find the update of the firmware (1.15 at that time) and the Quick Start Guide.

  See you soon

• Toshiba Gigashot K40HE - Firmware - in Dutch

  Hello

  I buy the Toshiba Gigashot GSC-K40HE last year and seen on the Toshiba site there will be an update of the firmware that is, including the Dutch language. He would be ready to start this year, February I think it was.

  I can't find the place where it was, and I wonder if there is already this update...
  Please can someone say something about this?

  Best looks and thanks in advance for your answers

  Björn

  Hello

  The one and true place for firmware update can be found on the European driver Toshiba page.
  Here, you have to choose:

  Options->-> digital video cameras to digital imaging-> Gigashot K series

  It looks like he's on 07/01/08 and at this time it s a version 1.09

• What kind of cable HDMI do I need?

  I'm trying to understand what kind of mini HDMI cable, I need to my Xoom.  Are there different sizes of mini Cables HDMI?  I keep seeing A HDMI to HDMI C.  HDMI A to D, or micro HDMI and miniHDMI.  So I am really confused.  I scoured the specs on the Xoom, but all it says is "HDMI output."

  rkbarth wrote:I'm trying to figure out what type of HDMI mini cable I need for my Xoom.  Are there different sizes of mini HDMI cables?  I keep seeing HDMI A to HDMI C.  HDMI A to D, or miniHDMI or micro HDMI.  So I'm really confused.  I've scoured the specs on the Xoom but all it says is "HDMI output."I found this cable on amazon.  Will that work with the Xoom?
  

  Hello.  You must the microphone cable HDMI to male HDMI standard.  The mini is not the right size for the Xoom.  I'll be right back with the cable you need from Amazon.   -Dan

  Here is the cable you need, it's a cable of high quality and type you need to connect to your TV.  It is a micro HDMI to male HDMI.

  Post edited by: DansDroid

• Hello. I just bought an HD TV and have cable HDMI installed on my computer. But now I've lost sound on my computer speakers. I don't know why...

  Hello. I just bought an HD TV and have cable HDMI installed on my computer. But now I've lost sound on my computer speakers. I don't know why...

  According to the map, you must use SPDIF to connect it to the SPDIF header on the motherboard. Map however NOT all need SPDIF to get sound

• Laptop connected to the TV using a cable HDMI gets no picture just audio

  My TV captures the laptops of screen cable hdmi soon an i plug it in but won't play no audio and I cannot work out how to get the audio working. Help, please

  Hi cus.

  VGA, DVI and component video cables do support audio signals. HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separated from the sound card of your computer directly to the TV. Otherwise, you need to connect the different audio signal to an output device, such as external speakers or your stereo.

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Update the driver for graphics card on the computer and check.

  How to upgrade the graphics card on the machine driver

  1. click on Start, click Control Panel, and then double-click System.

  2. click on the hardware tab, then Device Manager.

  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  3. click on display adapters to expand.

  4. under display adapters, double-click the entry for your graphics cards, and then click the driver tab.

  5. click on Update driver software.

  6. follow the Wizard update driver to update the driver graphics cards .

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Send audio via a cable HDMI ARC

  Can you send audio jack arc yamaha rx777 receiver using a hdmi cable arc apple tv all so 4 ca audio played on the Bose QC 35 bluetooth headset.

  Linz

  N °

• No sound from the HDMI connection Toshiba Bluray player BDX2100

  Hello

  I'm a newbie so I don't know if I'm in the right room or not, I want to ask that I have a Toshiba Blu Ray player model number or to number BDX2100 I have set up my fine reader TV and blu ray.

  There is one thing when I play my TV to HDMI 1 or 2, the image appears but there is no noise at all when I go on the Blu Ray in the audio settings menu it says 2nd audio or something to do with the HDMI is turned off.
  Oh I'm 100% sure and my tv is Sharp Aquos LC-22LE320 is not the TV because when I put the SCART lead in or put it on AV it works fine.

  The only problem is the sound with HDMI connection. If anyone can help, it will be very happy because it has been me bloody crazy.

  -musicman1982

  Hi mate

  It is a Toshiba computer / laptop computer forum.
  You will meet people who want to talk about options for laptops and Toshiba laptops.
  I doubt anyone here would be able to help you with this drive blueray.

  But in your case, I would first check the settings of the TV you.
  Check whether the sound via the HDMI port is enabled.

  > in the settings audio, it says the 2nd audio or something to do with the HDMI is turned off.
  I don't know why 2nd audio is mentioned there but maybe you should check if you can switch this 1 audio (audio main stream) m

  I recommend also consulted this blueray Player user manual.

• Activation input HDMI on Toshiba 40TL868

  How to set the activation of HDMI input on 40TL868? Instead of always having to manually switch on the remote control and menu-source HDMI input.
  Who can help me with this?

  
  Message was edited: assignment has been translated

  My Toshiba TV always starts with HDMI1 port, so my first external device is connected to the HDMI1 port.
  When I want to watch the BD or DVD that is connected to the HDMI2 port I have to change it manually.

  There is the same situation on your TV?

• Question I look at KODI cable HDMI MacBook Pro 13"

  Hello, I have a MacBook Pro 13 inch with the retina display; 2.9 GHz Intel Core i5 processor and an a 6100 Graphics Iris Intel running iOS EL Capitan 10.11.3.

  My MBPro has an HDMI port that I'm supposed to be able to connect to and watch on my TV. When I connect the HDMI to the TV, I met a few scenarios.

  My desk top appears on the TV (even if it is a modified version of my office, in what most of my icons are not displayed)

  I can hear the show on television but not to see the movie on the TV; KODO always plays on the MBPro.

  I can watch on my MBPro KODI but I would prefer to watch on the big screen.

  I tried:

  connection cable before I start,

  cable connection during execution of KODI

  go to System Preferences / display and AirPlay of selection and non-selection and mirrored and I really have no idea if anything else that I can solve this problem.

  Help, please.

  With the connected HDMI, available to the default view will be a desktop for your Mac and one for the TV.

  You can drag the window from application KODO to the TV screen to see her there. See System Preferences > monitors > Arrangement to see where the TV is set, probably to the right of the screen of the Mac. You can also drag TV to a favorite place there too.

  Alternatively, if you select mirror display in System Preferences > displays both screens will display the same content.

• no cable hdmi not sound on new g6 1133 windows 7

  I have a new hp g6 1133, no sound on the tv when using the hdmi cable, should be already up to date.

  TV is good,

  any help welcome

  Hello

  Connect the HDMI cable the to your TV, then do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the exit HDMI ATI that once highlight, then click the "Set default" button.  Click on apply then Ok to save the changes and see if it had any effect.

  Kind regards

  DP - K