No sound from the HDMI connection Toshiba Bluray player BDX2100

Similar Questions

• Qosmio X 70-A-12 X - no sound through the HDMI connection

  Qosmio X 70-A-12 X - Windows 7

  I have tried everything regarding this issue, lost 12 hours of research and asking everyone... I hope that you will give me the answer. I tried to install the drivers for different processor, Intel based, each time nothing, I have a controller, video, audio and Conexant smartaudio HD game.

  I also tried letting windows install their own driver. Windows Media Monitor... I have this case HDMI is shown but gray color, as there is nothing plugged. When I click Properties it says that everything is ok and active... so thank you for reading this. If you know another way to activate the sound via HDMI, I would be very grateful.

  PS - I picture on HDMI, but no sound.

  Thank you!!! :)

  Hello

  I checked the Toshiba download page and I can see your Qosmio machine is supported for Win7 64 bit and I think that you are using this version.
  I see ago offered all the important factors like driver chipset driver driver sound or display, so I hope everything works out well and there is no reason for experiences drivers.

  I would like to know if there is a problem when you use your machine without connect anything to it? is everything is OK with the material? You hear the sound on the internal speakers or headphones?

  To your HDMI issue: can you please explain what you are trying to do exactly?
  Are you trying to use your Qosmio with TV or what? When you open the properties of the sound > playback devices have tried to activate the listed device output digital (HDMI) and set its default value?

  By the way:
  Click on the volume icon in the taskbar and click mixer.
  Digital output is listed here? Check it out in the operative part of the option. Make sure that is not set to mute.

  Play a little with all these settings to make sure that everything is OK.

• Satego X 200-no sound when the HDMI connection is used

  Hello

  I got my Satego X 200 a year ago and since yesterday I try to use the HDMI interface to connect to an LCD TV. I get a brilliant picture, but no sound at all. Is there anything that I do not take into account? I googled everything I could think of, but appropriat answers found.

  I'd appreciate any help.

  Thanks in advance

  So I'm back again with the solution that has helped so I hope it will help other users. I did an update of the BIOS, graphics card and HD Audio. The only thing that really helped was the driver / software update, I did it on the sound by updating the drivers and s/w them have downloaded directly from the Realtek Site. SO I hope this hepls someone else in the same situation.

• I can't set the HDMI output as default device and I don't get sound from the HDMI output.

  I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there.  Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.

  Windows Vista Home Premium SP2 64-bit
  with the NVIDIA GeForce GTS 250 graphics card
   
  Original title: audio HDMI cable no.

  I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there.  Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.

  Windows Vista Home Premium SP2 64-bit

  with the NVIDIA GeForce GTS 250 graphics card

  ==========================================================
  The following article might be worth a visit:

  Windows Vista - HDTV: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions
  (See _ why don't I hear audio when I connect my computer to a HDTV)

• No sound from the tv with hdmi w3 connection

  I have a standard micro HDMI to connect my w3 to tv.  When a movie plays on the w3, I can see the video on the Tablet and the tv, but only the Tablet has its.  Is this normal?   I checked that the tv properly with other hdmi sources works but have no way to test the brand new microphone cable or w3 drivers.

  I was unable to locate a compatible driver on intel.com.

  However, I tried the w3 with a different TV and everything worked as expected: even with only a 'driver' Intel ESS Audio Device (WDM) available.  Passage of the tablet on television was automatic.  I did plug in and turn on the tablet in front of the TV and everything worked.

  I tried the same procedure with the original tv and the results were good video but no sound from the TV.  The sound remained with the tablet.

  I hae 2 TVs and 2 blueray players.  I swapped every combination of TV and player and everything works well.  Since the Tablet works well with at least one TV, the hdmi cable is ok.  My conclusion is that the current configuration of the Tablet works with some TVs and others not, and until I can find a better driver I'll just have to live with it.  I wanted to be able to watch videos with the Tablet when I traveled and will just have to wait until I get whenever I go to see if it works.  Not very desirable but it's like that.

  Thanks for your suggestions and help.

  Problem solved (sorta).

• HP Wireless TV doesn't Connect - no sound from the TV

  HP G60 - 235DX notebook PC with Windows Vista.

  HP Wireless TV Connect WY555AA #ABC model

  Connected to the HDMI port - 2 on a Samsung HD 52 '' TV

  The video is great, but no sound from the TV speakers. Sound plays on the mobile speakeres.

  I checked the Device Manager on the laptop and the drivers are up to date and there are no conflicts.

  Help, please.

  Thank you

  Hello Larry,.

  Please take a look at this document, which provides troubleshooting steps that should help you resolve your problem of 'no sound', connecting your laptop to your Samsung TV via an HDMI cable.

  Please let me know if it helps to solve your problem.

  Good luck!

• Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  original title: sound through my tv speakers
  Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  Hello

  What version of OS are you using?

  Check if the sound configuration is set to HDMI

  1. click on start, click on Control Panel

  2. click on the Audio tab, select read. Now, check if you have selected Digital Audio (HDMI).

• I have my Dell XPS HDMI cable to my Sony Bravia TV / I get the image on the TV but the sound from the laptop

  I have my Dell XPS HDMI cable to my Sony Bravia TV / I get the image on the TV but the sound from the laptop

  Thank you.  I had to go to the sounds and have speakers/headphones to HDMI it didn't work at first but founmd you need to have the TV and the computer.

• Satellite A-L50-1DF - sound distortion using HDMI connection

  Hi all

  Recently, I bought a new laptop, a Toshiba Satellite L50-A-1DF.

  From the beginning, I experienced problems with the HDMI connection.
  When I connect my laptop to another monitor via HDMI more often than not, the sound is tinny and slightly distorted.

  When I unplug the cable and put it in a few times, most of the time solved the problem.
  I used different HDMI cables and different monitors with the same effect.

  Other laptops work fine with these cables and monitors.
  I reinstalled the drivers to display without a bit of luck and will eventually be sent my laptop in for repair.

  Unfortunately, the problem was not found when they looked at it and I'll it back without a repair.

  I have no idea what could be the problem, because it is not found by the repair team.
  The customer service is unfortunately reluctant to me more help.

  Can anyone think an explanation to this problem?

  Thank you very much in advance for your comments!

  Kind regards
  Natasja

  > I have no idea what could be the problem, because it is not found by the repair team.

  This means that the technician did not notice the sound distortion.
  I think that it s very difficult to solve a problem that is not reproducible.

  In my opinion, you should check exactly when this question appears and must try to reproduce the HDMI sound problem.
  You should concentrate on the audio source and the software that runs when you connect the laptop to the external monitor TV.

  Also I recommend that you perform the tests after the system has been recovered to factory settings.

• TV does not recognize the HDMI connection

  I put Windows XP on my PC instead of Windows 7. I installed so I thought that all the correct drivers but my TV does not recognize a connection when you use an HDMI cable to watch movies via my laptop. I want to be able to drag the window on the tv screen to watch a movie and still use my phone for other things.

  Please help me.

  Hey Buddy,

  Here in the forum there are already a lot of discussion about the HDMI connection. I would recommend checkthing these discussions that might be useful:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=236993𹷁
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=232961𸸁
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=234457𹏙
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=230999𸙗

• I have no sound from the external speaker

  I connected this morning my iPod in my car, as always. But today I got the only sound from the internal speaker and no sound from the external speaker in the car. So far I have never had problems.

  How did the car system connected to the car?

• Satellite P500 - cannot get sound through the HDMI to the TV

  Hello

  my system is a P500, win7 64 bit, ATI Mobility Radeon HD 4500/5100 Series video card, 4 meg RAM.

  I can't get sound via the HDMI to the TV,
  I've updated all the drivers.

  There is also no noise from interface SPDIF playback devices, it says Conexanant SmartAudio HD ready. Computer laptop speakers and headphone works.

  See you soon.

  Hello

  SPDIF or digital audio (HDMI) output is visible in Control Panel-> Sound-> tab reading?

  If so, mark this device as * default * and test the sound of the TV again.

  Greetings

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• New iPhone SE no sound from the speaker of the brand

  I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

  I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

  Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

  • Key "secret" in both positions, no sound from the speaker
  • The top volume, using the volume buttons and the sound, no sound from the speaker settings
  • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
  • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
  • Past the phone power off & on again, no sound speaker
  • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
  • Reset iPhone settings, no speaker sound

  I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

  Thank you

  Hello Andy,

  Thank you for using communities of Apple Support.

  I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  If the problem persists, then please make an appointment with the Apple Store is close.

  http://www.Apple.com/retail/Geniusbar/

  Take care.