Similar Questions

• This SSD would be a good choice for my end of 2011 Macbook Pro?

  Crucial MX300 SATA 2.5 "7mm (with 9.5 mm adapter) 275 GB SSD internal

  End of 2011 MPB 17 inches

  Would be also upgraded to the crucial 8 GB Ram

  Yes, that fits into the space, which is a space of data sufficient for your needs? 275 GB?

• Upgrade memory to the end of 2011 MBP

  Please can someone advise what is the maximum memory possible for a MBP (late 2011 model) 17IN.  Thank you

  If Apple says that 8 GB of RAM, RAM manufacturers have found THST 16 GB of RAM will be accepted.  My two Mbit/s by the end of 2011 have 16 GB of RAM installed and works perfectly.  The best sources of RAM compatible Macs are OWC and Crucial.

  Ciao.

• Aurora r4 (end of 2011). Three s gpu except the original one has developed cracks.

  Hi, I had trouble with my r4 Alienware Aurora (end of 2011). The original gpu was a 555 gtx, but I upgraded to an hd 7970 just a few months after I got the computer. This card lasted a year and the theanks to a three-year warranty, I got a new hd 7970 which also lasted about two years before he fell. Still, I got a new card of the company, that I bought, but this time, it was an x 280 r9. This card lasted about an hour before I started having accidents. I decided to send my computer to a company that troubleshoot computers and they concluded that it was the gpu that was broken and they couldn't find any problems with my other components so they think it was a mistake to plant on the r9. However this doesn't seem to be a coincedence, and I think that there is something in my computer that breaks my graphics cards.  Only one strange thing is that my original gtx 555 works perfectly.

  Has anyone else had this problem with your r4 aurora?

  Hello

  Thanks for confirming this. The fact that the card has been tested with another computer and the same problem occurred pretty much tells us the card is defective. I understand your concern, but this is not a coincidence and you have already completed the recommended troubleshooting procedures. I can't think anything either in the computer that would make the defective AMD cards but work perfectly well with NVidia cards.

• (Redirected) Alienware aurora r4 (end of 2011). My computer is the breaking of my gpu?

  Hi, I had trouble with my r4 Alienware Aurora (end of 2011). The original gpu was a 555 gtx, but I upgraded to an hd 7970 just a few months after I got the computer. This card lasted a year and the theanks to a three-year warranty, I got a new hd 7970 which also lasted about two years before he fell. Still, I got a new card of the company, that I bought, but this time, it was an x 280 r9. This card lasted about an hour before I started having accidents. I decided to send my computer to a company that troubleshoot computers and they concluded that it was the gpu that was broken and they couldn't find any problems with my other components so they think it was a mistake to plant on the r9. However this doesn't seem to be a coincedence, and I think that there is something in my computer that breaks my graphics cards.  Only one strange thing is that my original gtx 555 works perfectly.

  Has anyone else had this problem with their r4 aurora?

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• How to apply the Calendar control for date field?

  Hello
  
  I created the field date tomcat creation calendar control by OPM and the environment and which apply as CSS thanks to OPM.
  
  But it does not work for the field to date, but if I changed to the text field, then he gives me the calendar control.
  
  So what changes required for this?
  
  Thank you

  Looks like you have changed a CSS style that applies to all the input controls and not only the date controls. Add something just for the dates, the simplest method is to change the model, which control the rendering of controls date (DateInputControl.vm).

• end of 2011 MBP close

  Hi all

  I have a 2011 end mbp, 10.9.5, which began to turn down when the power supply cord. I can put it to sleep and move it, then plug it back, so the closure is not immediate. my battery is the original one, but the sys info app says the condition is normal. I have reset the PRAM and MSC, it seems to work, but not for more than a minute or two.

  question: even if the sys info app says battery is normal, can be wrong sometimes?

  (either way, apple replaced 2 weeks ago the card logical under warranty I don't think it's connected, but may be.)

  I'd be happy to buy a new battery (such as the technology more recent one) and see if that helps, but with the sys info app saying normal battery, I don't know if that would help. thoughts? pasted the battery below report (why o why paste from info sys app not working?):

  Manufacturer:	SMP
  Device name:	bq20z451
  Pack Lot code:	0
  Number of PCB:	0
  Firmware version:	406
  Review of material:	2
  Review of the cell:	158

  Information on this charge:

  Remaining charge (mAh):	6278
  Fully charged:	Yes
  Load:	NO.
  Full Charge capacity (mAh):	6278

  Health information:

  Number of cycles:	406
  Condition:	Normal
  The battery is installed:	Yes
  Amperage (mA):	0
  Voltage (mV):	12426

  I have a MBP of 2011 as well late, and I replaced the logic myself aboard there is not long.

  And then I had to replace the battery as well... after a few questions.

  I suggest to replace the battery, it MUST be fried at this point.

  By fried I mean old, old way.

  Genius Bar can do some specific tests, which will fail if the battery needs to be replaced.

  It's the only way you can know for sure...

• end of 2011 MBP stops when unplugged

  Hello, my MBP end 2011 (on 10.9.5) was most recently at apple, the logic board has been replaced. shortly after that I came back, he began to stop once unplugged. Re-start works, but only for a minute. system report states that, whatever it is the air out here? Sounds like a battery problem, I'm on the original battery, but I thought battery would just shrink, not just stop working.

  Information model:

  Serial number: D8 * LAZ

  Manufacturer: SMP

  Device name: bq20z451

  Pack Lot Code: 0

  PCB batch number: 0

  Firmware version: 406

  Review of equipment: 2

  Review of cells: 158

  Information on this charge:

  Charge remaining (mAh): 6432

  Fully charged: Yes

  Loading: No.

  Full Charge capacity (mAh): 6433

  Health information:

  Cycle Count: 405

  Condition: Normal

  Battery: Yes

  Amperage (mA): 0

  Voltage (mV): 12484

  Parameters of power system:

  Alternating current:

  System timer (min): 0

  Disk sleep timer (Minutes): 0

  Display sleep timer (Minutes): 30

  Wake up on the evolution of the ca: No.

  Wake up to the opening clamshell: Yes

  Wake on LAN: Yes

  Current generator: Yes

  View Sleep uses Sun: Yes

  GPUSwitch: 2

  PrioritizeNetworkReachabilityOverSleep: 0

  Waiting period: 4200

  Standby mode enabled: 0

  Battery power:

  System timer (min): 15

  Disk sleep timer (Minutes): 10

  Display timer (min): 15

  Wake up on the evolution of the ca: No.

  Wake up to the opening clamshell: Yes

  View Sleep uses Sun: Yes

  GPUSwitch: 2

  Reduce the brightness: Yes

  Waiting period: 4200

  Standby mode enabled: 0

  Hardware configuration:

  UPS installed: No.

  Charger AC/DC Information:

  Connected: Yes

  ID: 0X0100

  Wattage (W): 85

  Review: 0x0000

  Family: 0 x 0085

  Serial number: 0 x * 4bd

  Loading: No.

  < personal information under the direction of the host >

  Hello marc cardwell,.

  If your MacBook Pro stops unexpectedly when you unplug your charger (despite correctly recognizing your installed battery), it can help restore his MSC and NVRAM.

  Reset the management system (SCM) controller on your Mac.
  https://support.Apple.com/en-us/HT201295
  

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  Sincerely

• By the end of 2011 Mac Book pro 15 inch battery indicating zero

  I have a 2011 Mac Book Pro (end) retina which really is not used as a laptop display. (always connected)

  Just today, he showed zero percentage battery icon.

  I have reset the SMC and that did not help

  Should I try to disconnect the battery to see if it would help

  Is the battery shot just like that?

  Thanks for the help

  In addition, if the battery needs to be replaced can I do it myself?

  Hello

  The battery may be necessary replacement.

  Check the number of maximum cycle. Instructions here > Determining battery cycle count for Mac notebooks

  http://www.Apple.com/batteries/service-and-recycling/

  You can replace the battery yourself > https://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+Battery+Repla cement/7511

  But if you have never done this before, I recommend you take your Mac to an Apple Store. You can make a reservation in advance at a Genius Bar.

• End of 2011 MacBook Pro update

  Can I use memory Module Apple 8 GB 1600 MHz DDR3 (PC3-12800) - 2 x 4 GB to upgrade my end 2011 MacBook Pro (4 GB / 1333 Mhz)?  The representative said it's for 2012, but I read here that some have used it without problems on years later.

  Mac can be very picky with ram, unlike Windows machines. For that it works better with no trouble now or later, be sure to buy ram designed for Macs. Match sticks and speeds. Some Mac does not start if a faster ram is used. Go with 2 x 4 GB 1333 mhm, same SODIMM, made for Apple products.

• End of 2011 Macbook with Windows 10 - adjustable brightness with the video card main?

  I have recently installed Windows 10 on my MBP late 2011 (officially unsupported, I know). For the most part, everything works, but the screen brightness adjustment doesn't seem to work with the driver from main video card (ATI 6600 M) - change the cursor on the user interface or by button have an effect, it is always 100%.

  If I change the Microsoft Basic display card driver in the menu devices (as suggested here in the forums), the cursor works, but the max brightness is about 50%, and I suspect the slow onboard gpu is active.

  Is there a way to get working with the primary ATI active adjustable brightness?

  Meanwhile, I found the solution: simply install the AMD Cataclyst driver that is included in the package Bootcamp 6.0 - and brightness control works as expected!

• End of 2011 MBP El Capitan Windows 7 Boot Camp without optical drive internal (LOSING MY MIND, Please HELP)

  What I have:

  • Original disc Windows 7 Pro from Microsoft as to
  • Downloaded ISO exact copy of Microsoft as well if need be
  • DVD player Samsung external optics
  • USB drive (s)

  What I don't have:

  • Optical drive internal and original; the Bay is empty.
  • Patience to use VM and WinClone and all that BS.

  Sorry for the harsh tone, but I'm losing my mind edition .plists and restart a hundred times a day. erasure of the USB drives when all this used to work years ago.

  I was sure it was possible to install Windows 7 on my MacBook Pro 2011 delay, an external optical drive. I not even asking to use a USB key.

  Why do I have all official records of Microsoft and a USB/DVD drive, but am forced to use an other intern, that is broken for like 90 percent of Mac owners.

  I see a black screen with a cursor on startup or a black screen saying no boot device... After using Boot Camp Assistant. I tried to not use the wizard and make a Fat32 partition on my USB on and implemented to date, but this method failed as well for some reason any illogical.

  Please help me or at least explain certain restrictions that I can never get about in what concerns my machine and Boot Camp.

  Thank you!

  Can you extract the the Samsung SATA connector and connect to the SATA internal optical drive connector?

  The EFI on your Mac version works partially with a USB Flash drive, but the file info.plist mounting is required. The VM/Winclone method also works.

• Apple fix bad logic board on mac pro 15 "(end of 2011)?

  I need information on getting my card Mac Pro 15 logical "(fin 2011) repaired by the recall of apple"

  https://checkcoverage.Apple.com/

  http://www.Apple.com/UK/support/MacBookPro-videoissues/

• Mac Book Pro end of 2011 up to 16 GB of RAM?

  Dear community

  my Mac Book Pro 15 "with 2, 5 GHz Intel Core I7, defined as 'late 2011' need for an upgrade of RAM of 4 GB real to something better.

  Check the plug on the Apple support forum seems my laptop can be upgraded up to 8 GB and is fine for me.

  But I also went to the local dealer in Italy and told me that I can spend with module 2 * 8Gb to 16Gb.

  It is true, or go up to 8 GB to be sure.

  Thanks for your time,

  Max

  Quite true, a MBP late 2011 will support up to 16 GB of RAM.  The best sources of RAM compatible Macs are OWC and Crucial.

  I have 16 GB of RAM installed in my 2011 Mbps, and both executed without flaws.

  Anyone who says that the 2011 MBP can not use more than 8 GB of RAM, does so by ignorance.

  Ciao.

• Need an SSD to replace my HARD drive in 15 "model end of 2011 of the MBP

  I use the original disc of hard - 750 GB - provided with the MBP (late 2011 model), but its very slow and I want out parts of the HARD drive before it dies. (I also have a Quad Core i7 processor - another reason I want to keep this MBP, rather than having to buy a new for $3 k).

  I watched the SanDisk SSD. Later those go up to 960 GB of storage, but they are SATA III models and my MBP has only capacity SATA II with a link speed negotiated 3. GBs WHEREAS the SATA III new models (SanDisk/Samsung) can handle up to 6 GBs. SanDisk Tech Support told me I could use their latest models SATA III , but the speed would be actually slower that my current set up.

  Thus, all other options for me? for one SSD that is compatible with my MBP and increase the speed?

  Thank you! Appreciate any help!

  Gary

  http://eShop.MacSales.com/shop/SSD/OWC