end of 2011 MBP close

Hi all

I have a 2011 end mbp, 10.9.5, which began to turn down when the power supply cord. I can put it to sleep and move it, then plug it back, so the closure is not immediate. my battery is the original one, but the sys info app says the condition is normal. I have reset the PRAM and MSC, it seems to work, but not for more than a minute or two.

question: even if the sys info app says battery is normal, can be wrong sometimes?

(either way, apple replaced 2 weeks ago the card logical under warranty I don't think it's connected, but may be.)

I'd be happy to buy a new battery (such as the technology more recent one) and see if that helps, but with the sys info app saying normal battery, I don't know if that would help. thoughts? pasted the battery below report (why o why paste from info sys app not working?):

Manufacturer: SMP
Device name: bq20z451
Pack Lot code: 0
Number of PCB: 0
Firmware version: 406
Review of material: 2
Review of the cell: 158

Information on this charge:

Remaining charge (mAh): 6278
Fully charged: Yes
Load: NO.
Full Charge capacity (mAh): 6278

Health information:

Number of cycles: 406
Condition: Normal
The battery is installed: Yes
Amperage (mA): 0
Voltage (mV): 12426

I have a MBP of 2011 as well late, and I replaced the logic myself aboard there is not long.

And then I had to replace the battery as well... after a few questions.

I suggest to replace the battery, it MUST be fried at this point.

By fried I mean old, old way.

Genius Bar can do some specific tests, which will fail if the battery needs to be replaced.

It's the only way you can know for sure...

Tags: Notebooks

Similar Questions

  • Upgrade memory to the end of 2011 MBP

    Please can someone advise what is the maximum memory possible for a MBP (late 2011 model) 17IN.  Thank you

    If Apple says that 8 GB of RAM, RAM manufacturers have found THST 16 GB of RAM will be accepted.  My two Mbit/s by the end of 2011 have 16 GB of RAM installed and works perfectly.  The best sources of RAM compatible Macs are OWC and Crucial.

    Ciao.

  • end of 2011 MBP stops when unplugged

    Hello, my MBP end 2011 (on 10.9.5) was most recently at apple, the logic board has been replaced. shortly after that I came back, he began to stop once unplugged. Re-start works, but only for a minute. system report states that, whatever it is the air out here? Sounds like a battery problem, I'm on the original battery, but I thought battery would just shrink, not just stop working.

    Information model:

    Serial number: D8 * LAZ

    Manufacturer: SMP

    Device name: bq20z451

    Pack Lot Code: 0

    PCB batch number: 0

    Firmware version: 406

    Review of equipment: 2

    Review of cells: 158

    Information on this charge:

    Charge remaining (mAh): 6432

    Fully charged: Yes

    Loading: No.

    Full Charge capacity (mAh): 6433

    Health information:

    Cycle Count: 405

    Condition: Normal

    Battery: Yes

    Amperage (mA): 0

    Voltage (mV): 12484

    Parameters of power system:

    Alternating current:

    System timer (min): 0

    Disk sleep timer (Minutes): 0

    Display sleep timer (Minutes): 30

    Wake up on the evolution of the ca: No.

    Wake up to the opening clamshell: Yes

    Wake on LAN: Yes

    Current generator: Yes

    View Sleep uses Sun: Yes

    GPUSwitch: 2

    PrioritizeNetworkReachabilityOverSleep: 0

    Waiting period: 4200

    Standby mode enabled: 0

    Battery power:

    System timer (min): 15

    Disk sleep timer (Minutes): 10

    Display timer (min): 15

    Wake up on the evolution of the ca: No.

    Wake up to the opening clamshell: Yes

    View Sleep uses Sun: Yes

    GPUSwitch: 2

    Reduce the brightness: Yes

    Waiting period: 4200

    Standby mode enabled: 0

    Hardware configuration:

    UPS installed: No.

    Charger AC/DC Information:

    Connected: Yes

    ID: 0X0100

    Wattage (W): 85

    Review: 0x0000

    Family: 0 x 0085

    Serial number: 0 x * 4bd

    Loading: No.

    < personal information under the direction of the host >

    Hello marc cardwell,.

    If your MacBook Pro stops unexpectedly when you unplug your charger (despite correctly recognizing your installed battery), it can help restore his MSC and NVRAM.

    Reset the management system (SCM) controller on your Mac.
    https://support.Apple.com/en-us/HT201295

    How to reset the NVRAM on your Mac.
    https://support.Apple.com/en-us/HT204063

    Sincerely

  • End of 2011 MBP El Capitan Windows 7 Boot Camp without optical drive internal (LOSING MY MIND, Please HELP)

    What I have:

    • Original disc Windows 7 Pro from Microsoft as to
    • Downloaded ISO exact copy of Microsoft as well if need be
    • DVD player Samsung external optics
    • USB drive (s)

    What I don't have:

    • Optical drive internal and original; the Bay is empty.
    • Patience to use VM and WinClone and all that BS.

    Sorry for the harsh tone, but I'm losing my mind edition .plists and restart a hundred times a day. erasure of the USB drives when all this used to work years ago.

    I was sure it was possible to install Windows 7 on my MacBook Pro 2011 delay, an external optical drive. I not even asking to use a USB key.

    Why do I have all official records of Microsoft and a USB/DVD drive, but am forced to use an other intern, that is broken for like 90 percent of Mac owners.

    I see a black screen with a cursor on startup or a black screen saying no boot device... After using Boot Camp Assistant. I tried to not use the wizard and make a Fat32 partition on my USB on and implemented to date, but this method failed as well for some reason any illogical.

    Please help me or at least explain certain restrictions that I can never get about in what concerns my machine and Boot Camp.

    Thank you!

    Can you extract the the Samsung SATA connector and connect to the SATA internal optical drive connector?

    The EFI on your Mac version works partially with a USB Flash drive, but the file info.plist mounting is required. The VM/Winclone method also works.

  • This SSD would be a good choice for my end of 2011 Macbook Pro?

    Crucial MX300 SATA 2.5 "7mm (with 9.5 mm adapter) 275 GB SSD internal

    End of 2011 MPB 17 inches

    Would be also upgraded to the crucial 8 GB Ram

    Yes, that fits into the space, which is a space of data sufficient for your needs? 275 GB?

  • Early 2011 MBP 15 "dual SSD - lost with boot camp edition

    Hello community!

    I lost my mind with boot camp troubleshooting during the last week. This is going to be confused reading, but I'm afraid I got worse... So please try to face me.

    Starting point - of course I can install Windows 10 on my MBP 2011 early!

    Material

    Early 2011 MBP 15 "with Intel HD 3000 and AMD Radeon HD 6750M

    and the optical drive, replaced by an other SSD with a caddy

    Of course, I didn't have an optical drive on the spot so I realized that I need to install to get the option to boot from USB - I did find. I managed to make a bootable USB from. ISO with UNETBOOTIN. First of all, I got score of huge problems with that I finally managed to Dodge with diskpart - software on Windows Installer USB after NVRAM reset before each attempt to install with CMD + Option + P + R, I had to also remove the OSX SSD during the installation of VICTORY for everything the world some boring as Windows could not update the configuration to start the computer. Unable to continue installation -problem.

    After all:

    -> I managed to install WIN10 on my MBP education

    -> A lot of festivities fun! < 3

    -> After installing the bootcamp drivers all active windows went to "invisible desktop on the left" (I closed the other workstations...) where I managed to lift one of the windows on the central office with lucky and "move" action (I have no idea...)

    -> after reboot apparently drivers Intel HD 3000 went haywire and I got black screen on black with details in black (black screen Uni)

    Conclusion: I try Windows 8.1 (pro) because at least he is supported by my Mac AND it has same installation and should work.

    At one point I tried to use my old drive via USB to install Windows 7 and 8.1 pro

    -> PROBLEM CDBOOT: couldn't find the BOOTMGR

    -> I moved along back USB and WIN8.1

    8.1 Windows Pro was installed easily, with the same procedure. When running boot camp display drivers turns black during the "Intel - graphic" installation period. I can confirmed that starting mode safe mode when the screen works, but I can't install Catalyst drivers-> so I can not play games that was the only reason for dual boot. In addition, there is no sound. So lack of drivers: no picture, no sound.

    There... I think I forgot to say something. I was hoping just that if someone could help me with this problem. I lose my head here. I have not really direction where to go next, but I have a few options I can try after that I understand my morale of my troops.

    1. Remove my boot OS X SSD, switch my SSD Windows instead of him and put my Superdrive. So I would basically just install windows. Earlier, I had 8 windows work via the DVD and bootcamp.
    2. Try to play with the drivers on Win8.1 more
    3. Reinstall windows. There may be something wrong with my. ISO or USB?
    4. Delete the EFI to correct CDBOOT?

    Thank you in advance!

    You must use Bootcamp Assistant for everything, including the form/partitioning implementation and the removal of partitions...

    I would like to reformat the second SSD (on which should be installed W10) with diskUtility. Then start bootcampassistant on SSD1 and do all this.

  • Mac Book Pro end of 2011 up to 16 GB of RAM?

    Dear community

    my Mac Book Pro 15 "with 2, 5 GHz Intel Core I7, defined as 'late 2011' need for an upgrade of RAM of 4 GB real to something better.

    Check the plug on the Apple support forum seems my laptop can be upgraded up to 8 GB and is fine for me.

    But I also went to the local dealer in Italy and told me that I can spend with module 2 * 8Gb to 16Gb.

    It is true, or go up to 8 GB to be sure.

    Thanks for your time,

    Max

    Quite true, a MBP late 2011 will support up to 16 GB of RAM.  The best sources of RAM compatible Macs are OWC and Crucial.

    I have 16 GB of RAM installed in my 2011 Mbps, and both executed without flaws.

    Anyone who says that the 2011 MBP can not use more than 8 GB of RAM, does so by ignorance.

    Ciao.

  • Could not open windows live mail, guard saying my calendar file is corrupted by this # at the end of 0x8E5E0220, then closes

    I have XP Pro.  I can't open windows live mail, he repeats to me that my calendar file is corrupted by this # at the end of 0x8E5E0220, then closes. any help would be appreciated

    Thank you

    David

    Hello

    The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

  • Aurora r4 (end of 2011). Three s gpu except the original one has developed cracks.

    Hi, I had trouble with my r4 Alienware Aurora (end of 2011). The original gpu was a 555 gtx, but I upgraded to an hd 7970 just a few months after I got the computer. This card lasted a year and the theanks to a three-year warranty, I got a new hd 7970 which also lasted about two years before he fell. Still, I got a new card of the company, that I bought, but this time, it was an x 280 r9. This card lasted about an hour before I started having accidents. I decided to send my computer to a company that troubleshoot computers and they concluded that it was the gpu that was broken and they couldn't find any problems with my other components so they think it was a mistake to plant on the r9. However this doesn't seem to be a coincedence, and I think that there is something in my computer that breaks my graphics cards.  Only one strange thing is that my original gtx 555 works perfectly.

    Has anyone else had this problem with your r4 aurora?

    Hello

    Thanks for confirming this. The fact that the card has been tested with another computer and the same problem occurred pretty much tells us the card is defective. I understand your concern, but this is not a coincidence and you have already completed the recommended troubleshooting procedures. I can't think anything either in the computer that would make the defective AMD cards but work perfectly well with NVidia cards.

  • (Redirected) Alienware aurora r4 (end of 2011). My computer is the breaking of my gpu?

    Hi, I had trouble with my r4 Alienware Aurora (end of 2011). The original gpu was a 555 gtx, but I upgraded to an hd 7970 just a few months after I got the computer. This card lasted a year and the theanks to a three-year warranty, I got a new hd 7970 which also lasted about two years before he fell. Still, I got a new card of the company, that I bought, but this time, it was an x 280 r9. This card lasted about an hour before I started having accidents. I decided to send my computer to a company that troubleshoot computers and they concluded that it was the gpu that was broken and they couldn't find any problems with my other components so they think it was a mistake to plant on the r9. However this doesn't seem to be a coincedence, and I think that there is something in my computer that breaks my graphics cards.  Only one strange thing is that my original gtx 555 works perfectly.

    Has anyone else had this problem with their r4 aurora?

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • Calendar control ends in 2011?

    In vFabric Hyperic HQ v4.6 controls calendar ends in 2011.
    Therefore, it is not possible to plan controls in 2012?
    Or the calendar changing to 2012 January 1, 2012?

    I logged a bug for this because it is very https://jira.hyperic.com/browse/HHQ-5301 to counter intuitive

  • Best SSD for end 2011 MBP?

    As the title suggests, I'll be in the market to improve the speed of my MBP late 2011. I upgraded the RAM 16 GB, and it made a wonderful difference. I record music on my computer, and I'd appreciate a reliable car with good read/write speeds.

    I looked in the EVO of 850 Samsung 500 GB drive, read some reviews and it seems most often receive positive responses. Are there any problems with it I should know about, or is there a better car for about the same price?

    Also, I read that there are sometimes problems with the implementation of a new drive from a backup. Can someone refer me to a good guide that clearly lists the steps to set up a new drive from a backup? I've stuck with OSX 10.9.5 and want to keep the same configuration, just with a faster drive.

    Thanks in advance for your advice!

    I use Crucial in my MBP in early 2011.  OWC (macsales.com) sells compatible devices.

    Samsungs are actually show several questions in these forums... firmware update is needed to make them fully compatible mac apparently.  Or it could just be that Samsungs sell as much as even small-ccurrence-of-problems appear more often.  But I'd still go to OWC first if my Crucial current failed today (much too early, according to all the life expectancy estimates).  If I wanted just a new smile, I'd be probably Crucial or OWC.

    You can make the transition easier... Download CarbonCopyClone ($40, bombich.com) and an external box or connect the kit to copy your current internal to the new SSD.  Then do the surgery after the SSD will start to your satisfaction.

  • Need an SSD to replace my HARD drive in 15 "model end of 2011 of the MBP

    I use the original disc of hard - 750 GB - provided with the MBP (late 2011 model), but its very slow and I want out parts of the HARD drive before it dies. (I also have a Quad Core i7 processor - another reason I want to keep this MBP, rather than having to buy a new for $3 k).

    I watched the SanDisk SSD. Later those go up to 960 GB of storage, but they are SATA III models and my MBP has only capacity SATA II with a link speed negotiated 3. GBs WHEREAS the SATA III new models (SanDisk/Samsung) can handle up to 6 GBs. SanDisk Tech Support told me I could use their latest models SATA III , but the speed would be actually slower that my current set up.

    Thus, all other options for me? for one SSD that is compatible with my MBP and increase the speed?

    Thank you! Appreciate any help!

    Gary

    http://eShop.MacSales.com/shop/SSD/OWC

  • May my end 2011 MBP running 10.11.5 El Capitan using Back to My Mac to see my 2006 Mac Mini running Snow Leopard 10.6.8?

    I want to be able to access my Mac Mini to the road, but it supports the latest OS is 10.6.8 which was at the time of MobileMe. How can I use back to my mac to access the mini?

    Thank you!

    I suspect that Snow Leopard 10.6 doesn't have access to iCloud, so set up Back-to-My-Mac might be a problem.

    You can use (free for personal use) TeamViewer.com screen sharing and transfer between your 2 file systems.

    <http://teamviewer.com>

    Try the current version on both systems, but if you have you can also get an older version for Snow Leopard system

    <https://www.teamviewer.com/en/download/previous-versions/>

    It is otherwise more complicated for remote connections, to open ports in your personal router, setting up secure ssh tunnels, etc., but it is really something for people who love to get down and dirty with pieces of computer

  • Looking to update my first internal hard drive 2011 MBP

    Instead of recently updated to a new external drive.

    I thought it may be time to update HDD internal (500 GB) original on my MPB.

    I have 8 GB of RAM and internal light enough to keep my drive in without worrying about storage and applications.

    Everyone updated their MPB HDD with a 7200 RPM disk or an SSD?

    If so, what drives internal you would very recommend?

    Search for better performance and faster read write time.

    My 500 GB drive is barely filled. There are currently about 150 GB of data used.

    Much appreciate your comments and experience once the internal drive has been updated.

    Ant case 2.5 "HDD or SSD will be compatible with your MBP.  Here is just one example of what is available:

    https://eShop.MacSales.com/shop/hard-drives/2.5-notebook/

    Maximum capacity at the moment is 2 TB, enough for almost all users and by eliminating the need for storage of primary data on an external drive.  I currently have 1 TB SSD Crucial in my Mbps in 2010 and 2011.  Would they change a profound impact on the performance of the computer.  If the bank account is fat, install an SSD.  If not, faster turns HARD drive will be better, but not as much as the speed difference may suggest compared with the 5400 RPM HARD drive.

    Based on reputation, the best currently available SSD is OWC and Crucial.  Although I prefer HGST and Seagate HDD, one brand will do that are listed in the link I have provided.

    As a side note, your MBP will support up to 16 GB of RAM.  OWC and Crucial are the best sources for RAM Mac compatible.

    Ciao.

Maybe you are looking for

  • Heat problem

    My macbook pro fan (retina display 13 inch early 2013 3 GHz Core i7) does not work, and after the use of 10 minutes, it became very hot.

  • Cannot view or change the signals in the timeline

    I'm pretty new to FCPX. But I know that I did this particular thing last week. I want to disappear a song at the end of my film. But the waveform for the song is not useful or editable. It's a very narrow (green vertical stripe in my calendar. There

  • Missing ProX Instrument slot logic.

    One of my students met something logical that I've never seen before. The 'Instrument' of the Inspector slot wasn't there. If anyone has encountered this before? I had him rescan Plugins and restore default in the Plugin Manager. I'm at a loss as to

  • NDIS2 drivers for the L10

    I need divers for the new L10 NDIS2 I. The one you have some that work?

  • How can I pass data between DIAdem and LabVIEW?

    Hello community, in fact I use a LabVIEW application to control a test system, collect data and store it in a file. DIAdem is executed (using ITOCommand) and then create a report (PDF). This works already. But also, I would like to receive a return v