Calendar not sych during HotSync

Similar Questions

• Calendar not updated during import from MS Project

  Hello guys,.
  
  I tried to import our previous list which was in p6 ms project format. It has been imported successfully, but when I navigate to the date on the calendar, it was '? I try to change my default calendar & assigned work/6 days but still not updated when I go to the activities. Is there a faster way for the caledar breaks? From now on, I update the one by an activity that is very difficult for me to change 900 + activities.
  
  Thanks in advance.
  
  
  
  Jeanine

  Hello

  You can add the calendar as a column and then to change the calendar for the first activity (top). Then select all activities. Then press on and hold down the SHIFT key, click the cell in the calendar the last activity (below), right click and choose "fill down". That should affect all activities to this calendar.

  This method works by assigning all activities in a project to one calendar, or by filtering a set of activities and their assignment to a calendar.

  Another method is to use a Global change to measure, but the above method is much faster and easier.

  I hope this helps!

• iCloud backup after iOS 10 - some files were not available during the last backup

  HI - we are a company with about 350 users of iPhone and iPad.  I put this in the iCloud in the community section, but I've seen other users have the same problem in this section, so I thought I would add here.

  In order to stop users add their own e-mail accounts on the iPhone that lock us the device through restrictions - deactivation of the accounts section.  It stops and then access the iTunes settings.  In the test of iOS 10.0.1, we have one of the devices (a 16 GB 5 s, who had been a backup at 7:20 that morning), improved 9.3.2 that went well with no obvious problems, then, after a few days to leave the handset to the function, we have lifted the restriction and the backup on iCloud to find any backup not occurred since the upgrade and a message 'some files were not available during the last. backup"in its place.

  If all our staff upgrade their phones (we gave says not yet) then the backups look like they stop.  It is easy to fix, as a manual backup, will complete the process, but you have to remove the restriction to do this.

  We tested on iPhone 5, 5 s, air iPad iOS 8 to 9.3.5 and all have this problem.

  I have exactly the same problem, 16 GB iPhone 5s as well. I plan on raising at my Genius Bar appointment today.

• Tecra S3 - HDD was not detected during the intallation of win7

  Hello

  I have Tecra S3 PTS30E, serial No. is 17023153 H.

  Now installed windows xp, I want to install Win7, but the HARD drive is not detected during installation. Windows xp works with this HARD drive.

  Why this problem?

  Please help me on this problem.

  Hello

  Tecra S3 supports RAID. Therefore, you need to install the RAID driver
  When installing XP, you will need to press F6 to add the RAID driver.

  Here the driver I found on the page of the European driver Toshiba

  [Driver RAID Tecra S3 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 195 & selSeries = 335 & selProduct = 596 & STAS hortMod = 431 & language = 13 & selOS = 10 & selType = 262 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 262 & page = 1 & ID = 43966 & OSI D = 10 & driverLanguage = 42]

• Volume Control Center does not work during a Skype call

  Volume Control Center does not work during a Skype call.

  That's exactly what I got after upgrade to 9.0.2 and 6.3 of Skype iOS

  I use Control Center to adjust the volume in applications. I can't use the volume button of material - it's broken.

  I thought that I could go back to the previous version of Skype (because I remember the working software volume slider), but the AppStore suggests none of the previous versions. I can't find another Skype.ipa than 6.3 anywhere. I tried to restore my ipad support Skype, but the program hangs for hours saying "Installation."

  Any help, please?

  Well, found a solution for the broken button by activating AssistiveTouch under settings > general > accessibility > AssistiveTouch.

• I try to print the task and windows calendar notes

  can you print the task pane and windows calendar notes

  Hello kevcokev2,

  Thanks for posting on the Microsoft answers Forum.

  Have you tried option Print Screen on your keyboard to print the task pane and notes?
  Who would print the entire area.  I don't see an option to print just the tasks or notes.

  Answer please come back and let us know.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Calendars not necessary removing of blackBerry Smartphones...

  Hello there,

  I use 4 different email accounts on my BB Storm. Unfortunately, each brings its 'clean' calendar.

  To get the BB in sync with my computer and a Nokia device, I use cyncronisation of Funambol server.

  Unfortunately all my appointments become "random" shared by all calendars... (say, I'm not

  able to spot any rule, the allocation is more...)

  Is there a way to 'delete' unwanted calendars (not whipe - complete just delete 'em)?

  If I select a single calendar to display, the next time I open it, all are selected again...

  see you soon,

  dognose

  If you want to completely remove the storm schedules, go to Options > Advanced Options > service book.  Browse and search the e-mail addresses with [CICAL] next to them.  Delete [email protected] [CICAL] e-mail addresses for calendars that delete.  Note however, that it is possible that if you never return service to your storm, calendars, books [CICAL] is sent as well.  In addition, make sure you have all of the appointments you want to save it somewhere.  When you remove the CICAL, appointments associated with them will be missing.

• VMNet1 and VMNet8 were not created during installation

  Hello

  I installed VMWare Player 4.0.4 on a 64-bit Windows 7 host.

  I use XUbuntu 11.10 as the guest operating system, and in the settings of the virtual machine, the network is configured for NAT.

  I run a Web server on the guest in port 3020 operating system and I'm unable to connect from a browser, I opened in windows.

  In the browser, navigate to: http://192.168.132.128:3020 / where 192.168.132.128 is the ip address of comments as indicated by/sbin/ifconfig.

  I suspect that the problem is the fact that I don't have an adapter VMNet1 and VMNet8.

  In some ways, they were not created during the installation.

  How to re-install these adapters?

  Thanks in advance,

  Ido

  • At the changes I made (the address of ip subnet of 10.0.0.0 vmnet8 and vmnet8 IP gateway for 10.0.0.138 chaning) correct?

  If the physical LAN subnet use 10.0.0.0 then no VMnet8 change to this subnet is bad.  It is also wrong to affecting also the VMnet gateway IP address in the same IP as physical LAN Gateway IP address.  The local physical network and VMnet8 (NAT) are supposed to be completely distinct and different from the IP addresses, the subnet mask, gateway IP address, etc.   Use the restore default in the virtual network Editor to fix your incorrect configurations.

  • Should I just the adapter VMNet8 if I use NAT? (currently in the "Network Sharing Center" I have LAN and VMNet8)

  If you try to run a Web server in a Virtual Machine and you want to be able to access if the host beyond and you have a physical router that the host is connected to then assign just NIC of the virtual machine that is connected by a bridge and it will be a counterpart on the physical LAN.  Also in the virtual network editor change VMnet0 auto to a specific host NIC as the automatic bypass does not always work correctly.

  • Is there something I can do to solve the speed problems I experience in the guest operating system?

  I would like to start using the button restore default in the virtual network and then editor change change VMnet0 from auto to a specific host NIC and then the value of the Network Adapter to the Virtual Machine, connected by a bridge.   (Bridged using guess your able to do so)

  If you use NAT then do with it properly configured and that you use Port Forwarding as necessary in the virtual network for VMnet8 Editor.

  ==========

  As well as your using VMware Player, however, read Chapter 5, setting up the network connections, by Using VMware Workstation in order to have a better understanding of the Infrastructure virtual VMware.  (Note: not everything in Chapter 5 will apply to VMware Player.)

• My serial number is not accepted during the installation of 12 elements in Photoshop.

  My serial number is not accepted during the installation of 12 elements in Photoshop.   Answer: This serial number is not valid for Adobe Photoshop elements 12.

  You can't do that by phone, but in the link I gave, click always problems? and then chat with an Agent.

• the system configuration not saved during the last stop on the service console error

  Hello

  I m getting this msg of error on the service console

  the system configuration not saved during the last stop on the service console error

  but when I tried to run some commands s troubleshoot mode according to the vmware esxcfg-boot - b, esxcfg-boot - p I got an error message like

  bad interprator usr permission denied

  I guess you follow this KB: http://kb.vmware.com/kb/1002503

  But seems like you have file system errors.

  Try to restart your system in init 1

  Then use fsck command to check your ext3 file system (remember that the file systems are not in use and use the - f option).

  André

• Settings not retained during VirtualCenter vCenter upgrade DPM?

  Hello

  I just upgraded my VirtualCenter 2.5U3 (using SQL 2005 Express edition) and I noticed that

  ILO/IPMI settings are not preserved during the upgrade.

  After you install the vSphere Client, the corresponding data fields are empty.

  Is it possible to get them without having to re-enter it and do the confirmatory test?

  Bernard

  These parameters are new in vSphere.

  I didn't see in version 3.5 (supporting only recovery mode WOL).

  André

• ORA-16143: connections of RFS not allowed during or after a Terminal recovery

  Hi all
  
  I wanted to transfer primary DB archiving log of STANDBY DB by the window / given destnination
  
  After you have created the database physically Eve, I put database waiting for recovery by using the command:-change the recovery of database managed standby database disconnect from the session.
  
  After that when I ran this command: -.
  ALTER database recover managed standby database finish;
  
  After that when I tried to recover database to help given comand awaiting:-recover managed standby database.
  
  Get the error such as ORA-16143: RFS connections that are not allowed during or after a Terminal recovery
  
  I can see this error on primary DB filev alerts log
  
  I can open my database in waiting.
  
  The two Oracle: 10.2.0.4
  The two platform: RHEL 4.7
  
  Please suggest me for this, help is appreciated
  
  Published by: user1687821 on July 12, 2010 08:37

  user1687821,

  After the use of the clause to FINISH, you MUST open the standby database as PRIMARY.

  Finishing clause must be used while you're perparing to failover to your database pending.

  Which is clearly given by the error message; you did a cover of Terminal:

   ORA-16143: RFS connections not allowed during or after terminal recovery 
  

  unless you have a pending restore point until you execute the clause of finishing, you will need rebuild your watch or use it as the primary database.

  See you soon.

• Alltell Treo755p - calendar removed on my desk and not able to Hotsync to get back

  I had my 755 p for some time and have not had any problems.  I noticed that my calendar has been removed from my desktop (Windows Vista).  I try to HotSync and it freezes just always in the same place - calendar sync - I try to cancel the Hotsync and he says just it is Cancel and may take a minute, but he never cancels.  I have restart my desktop computer.  When I restart; the HotSync Manager stands up and declares a Hotsync failure.  If I go to applications in the Hotsync menu and uncheck the agenda, hotsync is complete without any problems.  I'm not aware of any programs that have been recently added to my phone.  I have tried everything I can possibly think!  and suggestions?

  I would say DbFixIt Pimlico and after execution, synchronization with the conduct defined on the handheld overrides desktop

  Message relates to: None

• What should I do when the audio track in my calendar will not play during video playback after?

  I was editing my video and had to add new narrative.  When I did, all the music in the audio track has stopped playing during playback.  Narration is there and everything is as it is supposed to, but music in the audio will not play and I do not have the track muted.  Thank you

  saldurkin

  What version of Premiere Elements and on what operating system?

  From your description, this seems to be a known issue with elements of first 12/12.1.

  If so, please explore the solution offered by Llamadude and used with success by others according to the Llamadude, or with a change of the

  the original Llamadude solution. Please read the details in the following

  http://atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html

  Please let us know if it works for you and give more details.

  Thank you.

  RTA

• Calendar not in SYNC'ed after iOS MacOS update

  My calendar don't Sync today, one day after the iOs and Mac OS has been updated.

  I added 4 events on iPhone but only appear on my iMac.

  I added 1 event on iMac, but does not appear on the iPhone.

  I deleted an event repeated on iPad but it still appears on the iMac, but it was deleted on my iPhone.

  I'm confused and the calendar is out of control. What should I do now?

  Try to go to iCloud.com to see if the elements are there and whether the device or the computer. That should indicate if the device or computer is not synchronizing. If the computer, try going to System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing. If the device, go to settings/iCloud and do the foregoing. You can also try connecting to iCloud and then reconnect.