calibration Executive report failure

Similar Questions

• Calibration Executive is unable to generate pdf reports

  I Calibration Executive 3.4.1 and he ceased to generate a pdf, word, or excel reports. It always generates the text and html reports. I reinstalled cal exec and made sure he like all current updates. The only thing we have changed recently installed DAQmx-9, 4. I drove back to DAQmx - 9.3 that hasn't helped. If the default ratio is defined in pdf format, no report is generated. It will not open as any report earlier. It gives an error message saying the path is incorrect file is corrupt. The path is correct and the old pdf open just fine with Adobe (version 8 standard). Someone knows something similar or has any advice about what to watch next. Thanks for any help!

  Solution: the latest revision of JAVA has been altered causing the error. Remove and reinstall a clean version of JAVA and fixed the problem.

• Calibration procedure for a NI 9208 using Calibration Executive

  Is there a procedure to calibrate the NI 9208 using Calibration Executive?  I am currently using Calibration Executive 3.4.1 and I do not see this listed module in the Types of devices to menu drop-down.

  This device appears to me, NEITHER Max, so I don't think that my drivers would be obsolete.

  I can't seem to find a complete list of procedures for one of the Executive of the calibration of the versions on the Web site of NOR is this information available online?

  Thank you

  Hi Alex,

  No problem.  If the device is not listed in the module falling down and is not in the help, then it is not supported with the 3.4.1.  If you need this support, you will need to upgrade to a newer version.

  Thank you

  John

• PCIe-7852R and OR USB-7856R OEM Calibration with Calibration Executive

  Can I calibrate PCIe-7852R and NI USB-7856R OEM with NI Calibration Executive?

  How?

  Our version of National Instruments Calibration Executive Software is 3.5 and it has no procedures to OEM PCIe-7852R and NI USB-7856R products.

  Hello

  There are several ways to calibrate your instruments.

  First of all, the help file for the calibration of R Series devices to the Calibration Executive can be found by navigating using the Executive of Calibration > calibration device > data acquisition (DAQ) devices > NI dynamic signal Acquisition > NI R series calibration procedure

  You can also follow the instructions in the following document.

  http://www.NI.com/PDF/manuals/372004d.PDF

  Finally, you can also calibrate your software for the R Series devices using the calibration installed with the drivers. You can get "calibrate the device 78xxr" and run the executable file to calibrate your devices.

  Thank you.

  Kind regards

  Nigel

• Time-out error when you try to calibrate a PXI-6552 using Calibration Executive.

  I make a mistake I never saw elsewhere trying to calibrate a PXI-6552 using Calibration Executive. We have been calibrating these cards for 3 years and never had a problem. The error I get has to do with the HP 3458 A DMM taking a reading.

  1074126845 error occurred at IviDMM Read.vi in audit generation step voltage
  The possible reasons: maximum time state of the driver (Hex 0xBFFA2003) exceeded before the operation is complete.
  The primary error: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  As soon as Cal Exec implements the PXI-6552 module then will take a reading of the 3458A what an SRQ message on the 3458A, then the error message above appears in Cal Exec. I tried to reinstall the drivers OR DMM. The voltage on the meter screen is good for the first stage (5.5 volts DC), but it times out and gives me the error as indicated.

  Nevermind, I got the latest drivers and install and everything works fine now.

• Calibration Executive

  I use to perform external calibration and adjustment on the module, PXI - 4070 FlexDMM Cal Exec 3.2.2.

  How to access the comments field to include additional information?

  Thank you!

  Hello Philippe,

  You can use the LabVIEW VI to set what appears in the comment field.

  We'll find these VI in the LabVIEW function palette. Go to IO action > DMM OR > calibration > calibration utility.

  Use the VI, to initialize the first DMM as shown in the image below.

  

  After you run the VI above, the comment for the device field is as follows

  

  Does that help?

• Windows Server backup - Reporting failure, but creates a backup file

  Currently have a Server 2008 R2 running. Also runs Hyper-V with 3 than VMS. VM can be found on the D drive, so I have given up trying to save with C, since it was time.

  I don't have a setup of daily - just VSS full backup disk Local (c), no bare metal recovery or backup the system state. It's backup on a network drive shared on a different server.

  Daily backup status comes back as having failed. However when I go to the destination that the backup must be going, I see a 280 GB VHD file, which is the size expected to see.

  The error reported in the Windows Server backup is "one of the backup files could not be created. "Error: the parameter is incorrect".

  WSB is horrible to provide crash reports useful on what is the real problem.

  Anyone have any idea why it's create a large file of backup, but reported as having failed with this error?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error of org.xml ACS 5.3 Exception when executing reports

  Hello

  5.3 GBA running on a device of 1121

  When you run a report's RADIUS authentication, accounting, etc. is all report, I get the error attached image (org.xml.sax.SAXParseException...). I have not yet found a solution. I'm running another ACS 5.2 device that does not have this error

  If the upgrade to a newer version will solve this problem, the license (5.3) will suffice.

  Any help is appreciated

  Kind regards

  MOE Shea

  Hello Mo,

  I have this error either a browser problem, I recommend you watch the ACS 5.3 release notes and confirm if you are currently using a supported browser:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  A restart of services can take care of it as well in case you are using a supported browser.

  Note: Please mark as answer as appropriate

• I get the error message like "error - ORA-29273 report: failure of the HTTP ORA-06512: at"SYS. " UTL_HTTP", line 1130 ORA-12535: TNS:operation expired ORA-06512: 37 29273 line. 00000 - "HTTP request failed" * Cause: package UTL_HTTP The Impossible to run

  I have tried the code

  DECLARE

  lv_url VARCHAR2 (1000): = ' http://shenzhoufellowship.org/main2/files/old/SpecialTopics/TheLoveDare.pdf';

  lc_return BLOB;

  lhttp_url httpuritype.

  Varriables - declared to have written the LOB to pdf file-

  l_file UTL_FILE. TYPE_DE_FICHIER;

  l_buffer RAW (32767).

  l_amount directory: = 32767;

  l_pos INTEGER: = 1;

  l_blob BLOB;

  l_blob_len INTEGER.

  BEGIN

  -create URIs

  lhttp_url: = httpuritype.createuri (lv_url);

  -get the PDF document

  lc_return: = lhttp_url.getblob ();

  -Open the destination file.

  l_file: = UTL_FILE. FOPEN ('MBO_INPUT_DIR', 'MBD.zip', 'wb');

  -Get the total length of the BLOB

  l_blob_len: = DBMS_LOB.getlength (lc_return);

  -Pieces of the BLOB to read and write to the file

  -full up.

  While l_pos < l_blob_len LOOP

  DBMS_LOB. READ (lc_return, l_amount, l_pos, l_buffer);

  UTL_FILE.put_raw (l_file, l_buffer, FALSE);

  l_pos: = l_pos + l_amount;

  END LOOP;

  -Closes the file.

  UTL_FILE. FCLOSE (l_file);

  EXCEPTION

  WHILE OTHERS THEN

  -Close the file if something goes wrong.

  IF UTL_FILE.IS_OPEN (l_file) THEN

  UTL_FILE. FCLOSE (l_file);

  END IF;

  LIFT;

  END;

  But make a mistake like:

  Error report-

  ORA-29273: HTTP request failed

  ORA-06512: at "SYS." UTL_HTTP", line 1130

  ORA-12535: TNS:operation expired

  ORA-06512: at line 37 level

  29273 00000 - "the HTTP request failed.

  * Cause: The UTL_HTTP package cannot run the HTTP request.

  * Action: Use get_detailed_sqlerrm to check the detailed error message.

  Correct the error and restart the HTTP request.

  Please suggest a solution. Is it possible to download a zip file with the same code?

  [oracle@localhost ~]$ sqlplus scott/tiger
  
  SQL*Plus: Release 11.2.0.1.0 Production on Mon Apr 6 13:59:09 2015
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> --My Database version
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  DECLARE
    2        lv_url    VARCHAR2(500) := 'http://shenzhoufellowship.org/main2/files/old/SpecialTopics/TheLoveDare.pdf';
    3        lc_return BLOB;
    4        lhttp_url httpuritype;
    5        ---Varriables declared for writing the LOB to pdf file --
    6        l_file     UTL_FILE.FILE_TYPE;
    7        l_buffer   RAW(32767);
    8        l_amount   BINARY_INTEGER := 32767;
    9        l_pos      INTEGER := 1;
  10       l_blob     BLOB;
  11       l_blob_len INTEGER;
  12     BEGIN
  13       --create uri
  14       lhttp_url := httpuritype.createuri(lv_url);
  15       --get the PDF document
  16       lc_return := lhttp_url.getblob();
  17       -- Open the destination file.
  18       l_file := UTL_FILE.FOPEN('SAUBHIK', 'TheLoveDare.pdf', 'wb');
  19       --Get the total length of the BLOB
  20       l_blob_len := DBMS_LOB.getlength(lc_return);
  21       -- Read chunks of the BLOB and write them to the file
  22       -- until complete.
  23       WHILE l_pos < l_blob_len LOOP
  24         DBMS_LOB.READ(lc_return, l_amount, l_pos, l_buffer);
  25         UTL_FILE.put_raw(l_file, l_buffer, FALSE);
  26         l_pos := l_pos + l_amount;
  27       END LOOP;
  28       -- Close the file.
  29       UTL_FILE.FCLOSE(l_file);
  30     EXCEPTION
  31       WHEN OTHERS THEN
  32         -- Close the file if something goes wrong.
  33         IF UTL_FILE.IS_OPEN(l_file) THEN
  34           UTL_FILE.FCLOSE(l_file);
  35         END IF;
  36         RAISE;
  37*    END;
  38  /
  DECLARE
  *
  ERROR at line 1:
  ORA-29273: HTTP request failed
  ORA-06512: at "SYS.UTL_HTTP", line 1130
  ORA-24247: network access denied by access control list (ACL)
  ORA-06512: at line 36
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL(acl         => 'love.xml',
    3                                      description => 'Love ACL',
    4                                      principal   => 'SCOTT',
    5                                      is_grant    => true,
    6                                      privilege   => 'connect');
    7    DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(acl       => 'love.xml',
    8                                         principal => 'SCOTT',
    9                                         is_grant  => true,
  10                                         privilege => 'resolve');
  11    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(acl  => 'love.xml',
  12                                      host => 'shenzhoufellowship.org');
  13  commit;
  14* END;
  15  /
  
  PL/SQL procedure successfully completed.
  
  SQL> conn scott/tiger
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  DECLARE
    2        lv_url    VARCHAR2(500) := 'http://shenzhoufellowship.org/main2/files/old/SpecialTopics/TheLoveDare.pdf';
    3        lc_return BLOB;
    4        lhttp_url httpuritype;
    5        ---Varriables declared for writing the LOB to pdf file --
    6        l_file     UTL_FILE.FILE_TYPE;
    7        l_buffer   RAW(32767);
    8        l_amount   BINARY_INTEGER := 32767;
    9        l_pos      INTEGER := 1;
  10       l_blob     BLOB;
  11       l_blob_len INTEGER;
  12     BEGIN
  13       --create uri
  14       lhttp_url := httpuritype.createuri(lv_url);
  15       --get the PDF document
  16       lc_return := lhttp_url.getblob();
  17       -- Open the destination file.
  18       l_file := UTL_FILE.FOPEN('SAUBHIK', 'TheLoveDare.pdf', 'wb');
  19       --Get the total length of the BLOB
  20       l_blob_len := DBMS_LOB.getlength(lc_return);
  21       -- Read chunks of the BLOB and write them to the file
  22       -- until complete.
  23       WHILE l_pos < l_blob_len LOOP
  24         DBMS_LOB.READ(lc_return, l_amount, l_pos, l_buffer);
  25         UTL_FILE.put_raw(l_file, l_buffer, FALSE);
  26         l_pos := l_pos + l_amount;
  27       END LOOP;
  28       -- Close the file.
  29       UTL_FILE.FCLOSE(l_file);
  30     EXCEPTION
  31       WHEN OTHERS THEN
  32         -- Close the file if something goes wrong.
  33         IF UTL_FILE.IS_OPEN(l_file) THEN
  34           UTL_FILE.FCLOSE(l_file);
  35         END IF;
  36         RAISE;
  37*    END;
  38  /
  
  PL/SQL procedure successfully completed.
  
  SQL> exit
  Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  [oracle@localhost ~]$ cd saubhik/
  [oracle@localhost saubhik]$ pwd
  /home/oracle/saubhik
  [oracle@localhost saubhik]$ ls -l *.pdf
  -rw-r--r-- 1 oracle oinstall 60055 Apr  6 14:03 TheLoveDare.pdf
  [oracle@localhost saubhik]$
  

  I love this pdf file. I would like to read this and mean while if you get an error then please post in its entirety and also think that it is an Oracle error or network.

• Error executing report

  Hello world
  I try to run the report using view web document a few try server response error
  
  REP-56048: engine rwEng-0 crashed, job Id: 7063
  
  have id on this subject

  solution to your problem as follows

  https://forums.Oracle.com/message/473055

  If you are trying to save the spreadsheet file the you get mentioned error after you link. I checked that it works in (weblogic)

  to use ENHANCEDSPREADSHEET instead of the worksheet

  My Blog work - Oracle and SQL server: Oracle Forms Crash report when generating output Excel, REP-56049

• Interactive report - failure to 200 lines

  Hello
  
  Interactive report, when the attributes of the report 'Lines by picker page' is checked, the number of lines that appear by default is 200. Is there a way to change this default number?
  
  ?

  Hello...

  In IR, you can set the number of lines to display.

  Set the number of lines you want to see in your IR... in the search... bar...
  Click on go... then in the action menu... Select Save report..., then select Save as default report parameters from the drop down... then apply the blow...

  each time you run this report will display the specified number of lines...

• VRanger connection-Vsphere so descends from vRanger reports see it and worse still you say no connection

  I noticed sometimes the server Vsphere my guests and my 7.1.1. vRanger of connection depends on the will go down.  The reports that I have vRanger connection send me every day won't NOTICE and either give me 'nothing' in the past days or worse state "successful."

  It is repeatable and I feel goes on all versions of the product.  What he told me, is that error conditions have no "vsphere is down" in the list of errors to report.

  Oh email failure reports fortunately still works.  From my point of view, this is a pretty big omission.

  Technical support referred me here at this precise moment, the product operating as written.

  I added the feature request: FT 1035 improve notifications by e-mail to the employment report failures due to vCenter/ESXi host unreachable

• U2713H calibration questions

  Hello

  With the help of the Ultrasharp 'solution' with u2713h color calibration monitor & i1 Display Pro.

  What I want to do is to calibrate: 1. native color space of 2. White of 5800K to point 3. 120 cd/m2 4. 2.2 gamma & 5. 300: 1 contrast. And finally be able to validate the profile.

  None of this should be difficult, but so made by the limitations of this software solution.

  Could someone please help me with the details, I need to create this profile. I contacted Dell support but to no avail.

  Thank you

  Steven

  I think that everything can be except 5th point, because the Solution of Calibration color Dell (DSRC) don't offer any luminance control black level, so you end up with a contrast between 600:1 and 800: 1 (0.20 cd/m2, 0.15 cd/m2). Valitation of calibration must be done with the third party software.

  Native color space is more or less AdobeRGB, but with a wide range of red. So first of all, you need to measure 'your' native red. It can be done easily with GNU as ArgyllCMS/DispcalGUI software:

  0 - if you have some stored in CAL1 and CAL2 hardware calibration you need to 'factory reset' your screen.

  1 - put view profile "U2713H.icm" (that of the monitor driver installation) for your GPU doesn't store any correction LUT. Change your OSD preset 'Custom' and with 'RG_Phosphor.edr' as correction of calibration (you must tell i1DisplayPro what spectrum of light will measure, this file is located in the folder of the driver for x-rite).

  2-(optional) maybe you want to put your screen into mode custom 5800 k, 120cd. Details of primary RGB will not change but '' red measure '' will be in the coordinates XYZ, perpahps if you want "good" native red xy 'Y' coords. It can be done with the button "calibrate". Do the RGB OSD brightness and RGB gain and then simply cancel operation)

  3. - Tools-> calibrated screen ratio (or calibrated display report, I don't have access to a colorimeter right now to check it out). After a few bars, the program will report coordinated white XYZ, R, G, B in a window from the text console. Here you have it. Transformation of the xyY coords for the DA (en.wikipedia.org/.../CIE_1931_color_space):

  x = X /(X+Y+Z)

  y = Y /(X+Y+Z)

  4 - DispcalGUI close, open, choose 'Customize' and enter white, R, G, B coordinates, 120cd, gamma 2.2

  Native coords of green and blue will be very very close to AdobeRGB ones (en.wikipedia.org/.../Adobe_RGB_color_space) but you could use ArgyllsCMS log console and calculate the coords xyY measured for the Green and blue too. 5800K White daylight xyY is 0.325761,0.341574 as you know.

  If you want to validate the calibration with ArgyllCMS/DispcalGUI YOU do a V2 profile with the DA, not a V4 (it is in menu 'Préférences').

  5 - validate this profile with your favorite show: ArgyllCMS/DispcalGUI (free GNU tools-> Validate profile), i1Profiler (free four you since you own an i1DisplayPro), Basiccolor Display 5.1.2 (demo 14 days or ~$50/$60). With any of them, don't forget to point out the app to use the correction of "RG_phosphor" (i1DisplayPro is a very good colorimeter, but just a colorimeter, it must know what type of spectrum of light it will measure).

  Hope this helps you

• Output file was found, but is of size zero - suppressed during execution of XML, PDF reports in r12

  Hello

  After that I have clone, when executing reports, all reports are pointing to the old location as stated below, I followed some documents for the issue, but still no help. Please help me it is urgent.

  I mentioned the Sub oracle documents already and implemented changes that by the solution, but no help, the problem still exists.

  Output Post processor Log File contains java.io.FileNotFoundException (no such file or directory) error [463388.1 ID]

  BI Publisher requests fail Due To java.io.FileNotFoundException - no such file or directory [1072383.1 ID]

  XMl editor reports fail with java.io.FileNotFoundException on Temp Directory after cloning [1189764.1 ID]

  Error in the XML Editor: FileNotFoundException: (System file read-only (errno:30)) [742164.1 ID]

  [189179:RT2640592] Output file was found, but is zero size - deleted

  [13/11/13 11:49:55] [UNEXPECTED] [189179:RT2640592] java.lang.reflect.InvocationTargetException

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:611)

  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:239)

  at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)

  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)

  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)

  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)

  at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)

  at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)

  at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)

  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)

  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)

  at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)

  at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)

  Due to: java.io.FileNotFoundException: /u02/oracle/PROD/apps/apps_st/appl/per/12.0.0/xml/MASHCO_SUB_TEMPLATE.rtf (no such file or directory)

  at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)

  at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)

  ... more than 17

  Please help it is urgent.

  Kind regards

  Mohammed

  Hi Yang,.

  Thanks for the update!

  Good to hear about the issue is included, and you are welcome brother

  Please mark the thread as answered, as it would help others looking for answers to such queries.

  Best regards

  Asif

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray