Computer shuts down when internet wire connected at startup

Similar Questions

• Why my computer shuts down when I click both don't turn off computer buttons?

  My computer is an IBM Thinkpad T42

  Today, when I clicked on the button start and then disable the turn off computer button, the computer of the computer and then selected button would not be closed to low or off. Any ideas why it would not be arrested? Any ideas how to get it to close help to disable the buttons on the computer?

   I have can stop him by the on/off switch.

  Thank you

  Henry

  Hi Henry,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you are not able to stop the computer.

  This problem occurs if you install some versions of Norton Antivirus 2003.

  Perform the steps from the link below and see if it helps.

  You cannot log off, restart or shut down your Windows XP-based computer 

  Hope this information helps.

  Answer to us if you are having problems with shuts down the computer or any other problem of Windows, and we would be happy to help you.

  Good day!

• My computer shuts down when not used how can I stop this?

  What should I do to keep my computer of shuttting down when it is not used for a while? Vista is what I have.

  What should I do to keep my computer of shuttting down when it is not used for a while? Vista is what I have.

  ==========================================
  See the following articles:

  Change, create, or delete a power plan (scheme)
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Disable on Windows 7 or Vista power management
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-power-management-on-Windows-Vista/

  Management of power (Windows 7 and Vista) Options
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00825528

• My computer shuts down when you try to open Internet Explorer

  Original title: windows xp, does not

  my computer stop suddenly now when I try to open int explore, a box appears asking what program I want to use to open it, if I click on int expl another box appears, options to run or save, choose whatever an i, nothing happens.i tried to access panel a system restore or simply to check perf and hand It won't allow me to access one of these progs, he said only: application not found, basically, I can't access what, whether internet connection is fine.

  Hello

  Method 1:

  I suggest to do a SFC (System File checker) scan on the system and check if the problem is resolved. Follow the steps mentioned in the article below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2:

  I suggest that you should follow the steps mentioned in the article below.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

• my computer shuts down when I'm on why this happens?

  When I go to any web site or play games it rnadomly stop then I HAV wait 10 to 15 seconds to turn my turn... After this intruder entered into my computer, it has started to do... I have to take it in a computer store have they fix it? or is it possible to try other things on my own?

  Make sure that your Windows Firewall is enabled.  If you are not behind a router, you can get one to take advantage of the hardware firewall as well.  You can get them for as little as $15 these days.

  -

  Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  I hope this helps.  Good luck.

• My guard computer shut down when I'm not working on any topic. It also stops when I start by putting.

  I can work on e-mail or anything either, then all of a sudden it stops. Then he comes after the message comes on saying it closes unexpectively.

  When she stops when I start by putting it on the same thing happens.

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to find error messages in the event and after feedback from the observer.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

• my computer shuts down when not in use before the backup is performed. How do stay on

  When you back up the computer I do not. Then he stops before the backup is made making it incomplete, it's Vista

  You try to find a way to stop the backup computer?

  If so, follow the steps detailed here: http://support.microsoft.com/kb/927014

• My computer shuts down when he wants

  My office will stop whenever he feels like it. It doesn't matter if I'm in the middle of watching a movie or surfing the net. What happens with my computer, and can you please help me

  > My Office stops whenever he feels like it. No matter if I am
  > in the middle of watching a movie or surfing the net. What is going on
  > with my computer, and can you please help me
  >
   
  It looks like you may have a system (assuming that everything comes from overheating problem
  turn it off, rather than a shutdown procedure)? -in this case, your best bet
  is to take a local reputable dealer and have them cleaned
  (physically!). Should not take more than 15 minutes, assuming that it is a desktop-
  longer for a laptop, because they are more difficult to expose the necessary bits.
   
  --
  Noel Paton
  CrashFixPC
   
  Nil Carborundum Illegitemi
  www.crashfixpc.co.UK
   
   

• My computer shuts down when I'm embroidery software loading why?

  It starts to load tips from sewing for about 7 frames, and then it stops.  It worked and I'm stumped

  And how does this relate to the features of Windows Update?

• My guard computer shut down unexpectedly when I play games.

  My guard computer shut down unexpectedly when I play games. Now it is not always the case, just sometimes. The other day I was playing Sims 3 all day, literally, with the graphics settings maxed out and had no problem. The next day, he would crash as soon as it finished loading, even with the graphics settings at the bottom. Today, it was working fine this morning and now it crashes again. I had the same problem on and off with other games as well, Halo 2, Kings Bounty, UT 3. Here is my system:

  OS - Vista Ultimate 32 bit
  Processor: Core 2 Quad Q9400 @ 2 .66GHz
  RAM - 4 x 1 GB PC6400 DDR2/800
  MB - MSI P7N SLI - FI
  HARD drive - 150 GB x 2 (Raid 0) Raptor 10 k RPM
  PSU - 1000 watts
  GPU - NVidia GeForce 9800GT 1 GB (x 2 in SLI)

  And the error I get from Event Viewer:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I got the error almost everyday since I got the computer, about 10 months ago, but it only blocks the computer if I play a game. I tried the 'fix' that removes the WMI event viewer 10 error, but everything done was make sure the error is not logged. I also tried another fix I found me delete the files in the repository, but that no longer works. I also run scans of complete system of virus/malware Spybot Search & Destroy and AVG 8 and verified the updated driver for my hardware. I also ran diagnostic tool memory. Who has good/clean/current. Can it be fixed or what I have to reinstall the OS?

  Hi JerHekSr,

  Thank you for using answers Forum.

  The first thing that comes to mind would be to check the motherboard manufacturer for an update of the firmware/BIOS.

  The error message mentions "loadpercentage > 99' which looks like you are running may at maximum load of the CPU while the game and that is the cause of the crash. You could try a clean boot to prevent the using CPU resources while you play to see if it makes a difference of strtup programs.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows live quickcam pro 9000 when try to record vidio computer shut down restart

  Logitech Quickcam pro 9000 v-ubm46 window live... Quick capture... take a picture Yes... When try to record vidio computer shut down & restart

  Window xp pro served pack 2.2002 quickcam v11.8

  Suggestions appreciated thank you for research

  had no any error message the computer just black screen close

  Sorry, the problem is with the Quickcam capture

  Thank you for your help

• How can I configure drive extender? get an error when the computer shuts down say reinstall Extender player

  get an error when the computer shuts down say reinstall Extender player. ? What is it. Thank you

  Hi deener49,

  Please look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_other/please-reinstall-Extender-Player-invalid-or/86692b09-9464-E011-8dfc-68b599b31bf5

• When I try to burn a movie, my computer shuts down. This didn't happen with more short films, but this one is about 84 minutes.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  When I try to burn a movie with videos imported from different sources, the computer shuts down after 10 minutes.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  limespider wrote:
  When I try to burn a movie, my computer shuts down. This
  didn't happen with more short films, but this one is all
  84 minutes.
  =======================================
  Sounds lke a question of system resources.

  Large, complex projects can cause problems... it can
  be worth a try to create several small projects and save
  each of them in the format .wmv movie to a folder on your hard drive
  drive. When you import clips .wmv collection in DVD
  Machine to each of them becomes a scene (chapter)... you can
  have up to 18 scenes.

  Besides rendering video is time CPU and could
  initially be an overheating problem that could also result in your
  computer to close.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My computer shuts down is no longer with button closure

  My computer shuts down is no longer with button closure. Works only with button on the computer case.

  * original title - system update updates microsoft windows *.

  Hello

  1 are there any changes or updates made on the computer?

  2. what operating system is installed on the computer?

  3. what happens when you try to shut down the computer?

  4. do you get an error message? If Yes, what is the full and exact error message?

  Step 1:

  Try restarting your computer in safe mode and check if the problem persists.

  a. restart your computer.

  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Advanced Startup Options.

  c. using the arrow keys, select the Safe Mode option.

  d. press the Enter key on your keyboard to start Windows Safe Mode.

  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows goes into safe mode.

  f. check if you still have the problem.

  If it works fine in safe mode try performing a clean boot in order to find the cause root.

  Step 2:

  See the article about how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: when the diagnosis is complete do not forget to reset the computer to a normal startup.

  If the problem is not resolved, please provide more information to help you best.

• My computer shuts down without warning while I play games

  while I play games I see down in the system tray that the internet was disconnected and the few seconds my computer shuts down.

  so when I turn it back on it gives me a minute before he does again.

  again once it does only when I'm playing games and he did not do it now when I play, but after 10 minutes it starts.

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.