Call the print using ADF features

Similar Questions

• How to call the < af:query > Search feature by clicking on an image?

  Hi all

  I created a test named and I dragged on my page .jspx as "ADF with Table query Panel. I put the display as 'Simple' Mode in the Properties Inspector, who will hide all the default components of < af:query >. Now I use < af:commandImageLink >. My question is how can I call the < af:query > Search feature when the user clicks on an image? Any suggestion would be appreciated.

  Thank U...

  If you want to invoke af:query search by program button, follow these steps:

  1 Select af:query--> Advanced--> connections and bind it to the back bean

  2. in the .jspx add af:link like this:

  3 - runQuerySearchAction should be like this:

    public String runQuerySearchAction()
    {
      QueryDescriptor queryDescriptor = getRichQuery().getValue();
      QueryEvent queryEvent = new QueryEvent(getRichQuery(), queryDescriptor);
      queryEvent.setPhaseId(PhaseId.INVOKE_APPLICATION);
      getRichQuery().queueEvent(queryEvent);
      return null;
    }
  

• DeskJet 5500: When the printer uses the 57 cartridge?

  I thank very you much for your reply to my last post. Makes perfect sense.

  I'm doing a huge amount of B & W / grey scale printing; I use 56 about two cartridges a week and I reload them successfully for a few tens of cycles each.

  My 57 cartridges also mpty very frequently while I print almost any color - the only color is perhaps a small logo on the page.

  I tried to use the gray filter in Macintosh 10.4.11 system to send a grayscale image to the printer, but the 57 cartridge still empty quickly, even if the printed color is negligible.

  If the page still contains the least amount of color, 57 cartridge automatically prints the whole page, or the cartridge 56 prints black and the 57 print the little bit of color?

  If the 57 prints the whole page if it contains ANY color, is there anything I can do in the impression of New York to get the printer to use the cartridge 56 instead? I took to remove the cartridge 57, but when I put again, the printer goes through the cycle of test page, I want to avoid if I can.

  Thanlk in advance for your help.  I can't tell you how much it means for a user that a knowledgeable HP employee has actually answered questions through this forum. Other companies to let users themselves, often to hang in the wind without usable responses.

  Many use printers, not only HP, so-called 'underprinting' this is the pose of an ink of color on the page before the black ink.  Essentially, it is a primer for the paper.  The color dries quickly and is a base for black ink, allowing it to dry and cure without spreading out on the page.  If you have already printed with the cartridges out of alignment and saw a blue or magenta shadow to your text, you see the underprinting.  That's why, when the same printing black text, the printer uses a color ink.

  This printer is able to print reserve mode, which means it can print with 1 single cartridge installed.  The printing speed may be slower, but it's an easy way to make sure you are not using any color.  For reserve mode, remove the cartridge you want to use.  (Find a hermetic place to store this vertical cartridge with the nozzles pointing down as it is when it is installed in the printer, or it will dry out and become useless!)  To leave the reserve mode, put a good cart in the empty slot.

• How to call the print dialog box as soon as pdf is open?

  A pdf template has been created using adobe livecycle, then the final pdf is created using pdfMerger. Is there a way to call the print dialog box whenever the PDF is opened? Y does it have that no thate javascript should be used?

  I've never used a pdfMerger, but have you tried the following in the docReady event as suggested earlier?

  event.target.print();
  

• Photoshop CS 6 crashes when I call the print command.

  Photoshop CS6 crashes when I call the print command.  I have reset the default preferences.  I don't know if it's a computer problem or Photoshop.  Photoshop works in every other sense.  I can print from Lightroom.

  Try holding SHIFT keys when you start Photoshop. Try to hold the space bar when you click on print. What is information on your system?

  Benjamin

• the printer uses a different computer. no other computer help...

  I use an HP laptop.  Just upgraded to windows 8.1.  Now, I get this message "another computer using the printer" I have a PIXMA MG5420.  I'm connected wireless.  Help, please.

  Hi traveltwo,

  Reinstall the printer drivers on your computer can solve the problem that you are experiencing.  Before you reinstall, restart your computer and the printer.  Once restarted, please click here to access the drivers and software page for the PIXMA MG5420.  Once the initial download to your model page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, click the red arrow next to the "DRIVERS" section and click on the MINI MASTER CONFIGURATION file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once you have downloaded the INSTALLATION of MINI MASTER file, please double-click it to reinstall the drivers on your computer.

  I hope this helps!

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• Print the Test Page from the printer using prnqctl.vbs

  Hello. I have a HP Deskjet D4360 printer. As is the case with the ink more cheap jet, the print heads printers dry if they idle too long, and the expensive ink cartridge will lose. This printer is connected to my computer via a USB cable and is not on the network.

  What I want to do, it's automatically print a test page to the printer once per week. I want to this by setting up a task that calls prnqctl.vbs by using the following command:

  cscript C:\Windows\System32\Printing_Admin_Scripts\en-US\prnqctl.vbs EI Pei "HP Deskjet D4300 series"

  When I run (as administrator) command prompt and run this command, I see the following result:

  Microsoft (R) Windows Script Host Version 5.8
  Copyright (C) Microsoft Corporation. All rights reserved.

  Failure Print Test Page 5 Win32 error code

  My understanding is that 'Win32 5 error Code' translates to 'access denied '. I checked the name of the printer is "HP Deskjet D4300 series", so this isn't the issue.

  For what it's worth, I use Win7 Home Premium 64-bit SP1.

  Any ideas as to what can make it work? Thanks in advance.

  Hello

  The question you posted would be better suited in the MSDN Forums. We have separate team working on these issues.  I would recommend posting your query in the MSDN Forums.

  TechNet Forum

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful.

• Impossible to uninstall the printer using revo uninstaller (HP technical support also unable)

  I'm unable to uninstall an old printer, a HP Deskjet 5740, of my HP Pavilion laptop running on Windows XP. I tried the following:

  • To add/remove programs: the initializes to uninstall but I get «Fatal error during installation»
  • In the start menu > all programs > HP > 5700 > uninstall software
  • HP technical support used a Revo Unistaller and this also failed. They said it was a matter of microsoft.

  Note: the 5740 does not appear in the start menu > printers & faxes

  Any help would be appreciated. Thank you!

  Hi sarah,.

  I suggest trying to remove the printing mode safe software:

  http://support.Microsoft.com/kb/315222

  If this does not work, you can temporarily disable your security while in Mode safe mode software and try uninstalling again.

  You must make sure that the print program is not running when you do this.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• What cartridge of the printer using the psc1210xi?

  Does anyone know what ink cartridges use the psc1210xi ? I've been using hp21 and 22, but all the specs on the hp Web site say hp56 and 57? I've had the printer for more than 3 years. Have I been using the wrong cartridges.? Thank you

  SureSupply shows that for the PSC 1210xi compatible cartridges are...

  Black print cartridge
  Description of the product Page yield * quantity HP 56 print cartridge   (C6656AE) 450   Add   HP 56 b daily black print cartridge   (C6656BE) 450   Add
  HP 56 small print cartridge   (C6656GE)	190		Add

  HP 27 black inkjet print cartridge   (C8727AE)    Add everyday black print cartridge 27 b HP (C8727BE) add 280

  Cartridge three colors
  Description of the product Page yield * quantity HP 57 color ink jet print cartridge   (C6657AE)     Add   HP 57 small tricolor inkjet print cartridge   (C6657GE) 165   Add
  HP 28 color ink jet print cartridge   (C8728AE)			Add

• What happens if my default printer is not the printer used for printing from LR?

  Hello

  I use an Epson Stylus Pro 3800 for photographic printing, but is not the default printer on my system (and it won't). How I setup LR do use the default 3800? I tried a "default printer" option in the preferences but could not find it. Or have I missed something? I can't imagine there is no way to solve this problem.

  Thanks in advance.

  --

  Patrick

  Are you aware that you can save the printer model in print templates with page size, printer profile, etc.? Once the printer model is saved in the model, you must only select the model FRO Lightroom to automatically choose the correct printer.

  The steps are:

  1. start Lightroom

  2 go to the print module

  3. create a new print template and give it a name meaningful (for example model of printer - A4 landscape)

  4. click on Page layout (it would be more logical if he actually read the Print Setup)

  5. choose the model of the printer (for example Epson 3800) in list menu dropdown name printer - paper set size and orientation

  6. click on the properties button and configure the driver Epson as required (for example Page Size, the printer settings, etc.), and then click OK twice to close the properties of the printer and the print dialog settings

  7. right click on the model that you created in step 3 above

  8. choose update with current settings from the popup menu

  If you define profiles of specific printer that they can also be saved to the model

• How to create the stopwatch using adf?

  Hi experts,
  
  did you guys stopwatch example application using adf code?
  
  I'm trying to create by using javascript in the adf, but there is a problem updating the value.
  
  Thank you
  
  Hadi Wijaya

  Try, af:poll

  http://jdevadf.Oracle.com/ADF-richclient-demo/faces/components/poll.JSPX

• Print directly to the printer using RUN_PRODUCT in Forms6i

  Hi all
  
  I would like information about print any RDF directly on the printer of 6i form using RUN_PRODUCT.
  
  I got help from the form Builder Help option and I tried after coding form
  DECLARE
  PL_ID PARAMLIST;
  PrinterName VARCHAR2 (50);
  BEGIN
  
  PL_ID: = GET_PARAMETER_LIST ('WEIGHMENT');
  IF NOT ID_NULL (PL_ID) THEN
  DESTROY_PARAMETER_LIST (PL_ID);
  END IF;
  PL_ID: = CREATE_PARAMETER_LIST ('WEIGHMENT');
  
  PrinterName: = "" ' |'" I.T printer ' |' » ' ;
  Add_Parameter (pl_id, 'DESTYPE', TEXT_PARAMETER, PRINTER);
  Add_Parameter (pl_id, 'DESNAME', TEXT_PARAMETER, printername);
  Add_Parameter (pl_id, 'P_EQ_NBR', TEXT_PARAMETER,: weighment.eq_nbr);
  Add_Parameter (pl_id, 'P_WT_GKEY', TEXT_PARAMETER,: weighment.gkey);
  Run_Product (COLLECTION, 'c:\wegt001r', ASYNCHRONOUS, DURATION, FILE system, PL_ID, NULL);
  
  EXCEPTION
  WHILE OTHERS THEN
  MESSAGE (SQLERRM);
  END;
  END IF;
  
  But the report has not printed and next message received in the reports database engine
  
  Presentation report error [Thu May 07 18:49:23 2009]...
  REP-0159: syntax on the command line error.
  
  Pls help.
  
  Thank you
  
  Hassan

  Hassan,

  Give the PRINTER between quotation marks. then it won't work.

  Add_Parameter (pl_id, 'DESTYPE', TEXT_PARAMETER, ' PRINTER)';

  All other codes seems OK.

  Kind regards

  Manu.

  If this answer is useful or appropriate, please mark. Thank you.

• Photosmart HP 7520: photo printing from the phone to the printer using eprint

  I managed to install my new Setup / printer eprint services.  Everything works fine so far.

  However, I sent a photo from my iPhone to the printer and it printed on ordinary paper, photo paper No.

  Is there anyway to say ePrint to print a photo, or am I doomed to do on paper?

  Please advise,

  Thank you

  Billy

  Hello

  Are you happy now?

  Have a good weekend.

• Window pop-up with a message to the user using ADF and Java bean

  Hello
  
  I am able to download the file using the 'fileDownloadActionListener '. In case if I could not find the file to the location of the server, and then must show an error to the client using a popup.
  
  Can you provide links, if available.
  
  
  Kind regards
  Stalin

  See http://tompeez.wordpress.com/2011/07/14/validate-data-before-export-via-afexportcollectionactionlistener-or-affiledownloadactionlistener/ which describes a similar use case.

  Timo