call to a constant value of subtype in a package

Similar Questions

• How to change the constant value for the property node "Disabled"?

  Hi all

  I enclose one vi example of what I'm willing to do. It happens during the event for "left selectorrogrammed 1: changing values.»

  Basically, I created a property to a Boolean LED control node. Once clicked, I'm eager to turn it off so that the user cannot change the value (I have a reset all button for use on that).

  I created the node property for this control for disabled people.  When I'm in the block diagram, I change to write mode.

  I rt clicked on it and said: ' create constant ", he does.  However, the constant comes each time as "Enabled". I tried clicking on this constant and looking through all of that property, but I can't find a way to scroll the values or set the value of this constant to "Enabled" to "disabled."

  I see where you can change the elements of this constant... but I guess there is a way to switch this constant to the value you want... any suggestions?

  Thanks in advance,

  Cayenne

  To change a constant value, your cursor must be in the mode 'finger '.

  You can select this option in holding down the SHIFT key and right-click on the diagram - then select the finger.

  Another way is to put the automatic selection of tools:

  Tools > Options > environment > lock automatic selection of tools

  With this option, LabVIEW will choose the tools for you.

  Play with him a bit to see how it works.

  Steve

• Passing parameters to the method call in expressions of value

  JDeveloper 11.1.2.1.0 does support the feature of passing parameters to method calls in expressions of value in JSF pages? AFAIK this is JSF 2 version it and it should support this feature. Unfortunately when I put in a JSF page the following tag
  < h:commandLink value = "#{row.employeeId}" action = "#{empBean.showDetails (row)}" / > "
  The page does not work. Any ideas on this point?
  
  Thank you to everyone.

  Hello

  The functionality you need is defined in JSR 245.
  If you need to wait for it to become part of the standard, it will be included in JEE6
  I don't know if 11.1.2.1.0 uses JEE6 standard...
  You can try this other thing,
  http://www.coderanch.com/t/213290/JSF/Java/why-JSF-calls-method-parameter

• Lost the ability to create tokens of debugging: error: Code signing request has failed because the value debug token of Type Package is not allowed.

  I have been a token of debugging and apps on my device Z10 hundreds of times from the command line and Momentics but this time I am confused.

  I am trying to create a token of debugging (in command line and Momentics) and deploy it in my Z10 camera, but it does not work.   In both cases, I get the following error.

  "Error: Code signing request has failed because the value debug token of Type Package is not allowed."

  2 things have happened recently that make this potentially different situation.

  a.) now my device is currently running OS 10.2

  (b) there was something new regarding signing apps with your blackberry ID?

  I was a little out of the loop for 1-2 months so please forgive me if this problem is very obvious... I am looking for a clue to what I'm doing wrong.

  This has been fixed on both of your accounts.  It was a problem of account setup.  We're looking at what caused it to prevent it from happening in the future.

• The data specified in the request is invalid. The value of the field id package is not a MultipleLiteral, but the field is defined as MultiValued

  We have a property in a component software which is an array. the value is [""]

  In the blueprint I am sitting a value property ['vim', 'emacs'] defalult

  When I ask this plan and change the values of foo, bar, I get this error

  The data specified in the request is invalid. The value of the field id package is not a MultipleLiteral, but the field is defined as MultiValued

  someone knows why this happens?

  I'm runnign vra7.0.1

  Strangely, it works if

  Overridable is set to NO

• Call to a single value to an output channel for A Table need help

  I filled an array that contains all the values in all the channels of my series of data. I am now looking to channel calculations to provide weighted averages and an overall average for the value of the trial. These data will be produced in a new table called 'total table. " This Total table should only have one value per channel.

  The question that I am running is 2 times. When you do the arithmetic channel, mainly channel using "ChnSum" DIAdem amounts does not truncate all data in a new set of data. It retains all values and adds the last block with the sum of all of the channel as a whole. I need or be able to get this last value dynamically (because not all my datasets are the same length) or I need to generate a new string that has only the value of the sum. Is there a way to do this?

  Here is what I try to do but kind of pointless. A screenshot of what looks like the output of the table after treatment of this code is attached.

  "Complete total table with values from calculations above.

  For j = 1 to selectData.MultiSelection.Count

  Counter = counter + 1

  length = ChnPropValGet ("[" & selectData.MultiSelection (j).] ") Index & "] / Cumulative fuel ', 'Length')

  If counter = 2 Then

  [A bunch of calculations of the new output channels channel]

  Call View.Sheets ("total table"). Areas ("field:" & Counter). DisplayObj.Columns.Add (ChnFind ("(" & selectData.MultiSelection (j). ("The index &") > 0 "(, longueur-1))"

  End If

  Next

  Any help would be appreciated.

  Thank you

  ~ Nate

  
  

• Impossible to acquire constant values on FPGA in CompactRIO.

  Created a VI to acquire data from the analog input NI 9201 on the target FPGA CompactRIO 9004 and chassis 9014 module. We used DMA FIFO to transfer the data to the target FPGA for the RT. RT, read us this FIFO and then forwarded the data to the binary file to nominal vi. A possible problem could be that the binary file for vi nominal is acvquiring of the fixed point directly from the read FIFO data and therefore wrongly calculated. So we put indicators after reading the FIFO to check the values of fixed point. A constant supply of 5v has been read 4-5. But there are a lot of unreasonable variation. Is there another step I need to take to convert this binary fixed point? Is there something wrong with the FIFO DMA timeouts? I enclose all relevant VI.

  Hello

  What is the range in which the values are different? Also put a low-pass filter will help reduce the noise, if you want to measure the continuous tension only.

• Transformation of the party calls for different incoming calls whose previous number value (0)

  Community salvation.

  If you see my other discussions created the last days, I managed to configure some functions on our 6.2.1 CallManager. that we really needed.

  But there is a problem and I would like to ask you once again.

  Our internal Cisco phones have 3-digit extensions, from 100 to 999. We had the problem one 0 prerequisite not indicated for missed calls, which I fixed in a translation model that adds two '00' to any incoming call. For outgoing calls, one is removed by the CallManager (PreDot), so called work very well.

  BUT: the translation model that adds the two 00 only works 100% with 10 digits of the external numbers. For example: If a mobile with 0170555yyyy calls an internal number, it is translated to 00170555yyyyy (without translation, it is only 170555yyyyy) and recall works very well. If instead a mobile with 0170555yyyyyzz calls an internal number, it is translated to 00555yyyyyzz. The reason that seems logical: the translation has the value "00xxxxxxxxxx". So it works only with external 10-digit numbers.

  What should I do to make it work with ANY external number? So who calls internal phone - gets two leading '0' being the tracking number by the rest of the caller id?

  Can be simple - but I do not see the answer. :-(

  Thank you. Kind regards.

  Oh, I see what's wrong. You don't need any call mask part xform. Leave the field blank and just add the prefix...

  Please note all useful posts

  "opportunity is a haughty goddess who don't waste no time with those who are not prepared."

• Not able to access the constant value of package in oracle reports

  Hello

  I created the package with the constant variables in the database

  CREATE or REPLACE PACKAGE cls_vars AS

  -Constants

  const_yes CONSTANT VARCHAR2 (1): = 'Y ';

  const_no CONSTANT VARCHAR2 (1): = 'n';

  const_active CONSTANT VARCHAR2 (1): = 'A ';

  const_inactive CONSTANT VARCHAR2 (1): = 'I ';

  end;

  I created the function of oracle reports, please see the code below

  function CF_CONSTINACTIVEFormula returns the Char type is

  L_const_inactive VARCHAR2 (10);

  Start

  RETURN cls_vars .const_inactive;

  EXCEPTION

  WHILE OTHERS THEN

  RETURNS A NULL VALUE.

  end;

  When I compile this code in the oracle reports, I get this error "cannot directly access remote variable or cursor.

  We can not directly get/set a variable (or constant) in a package to database forms and reports module.

  We must use the procedures/functions to get/set accessor. For example:

  CREATE or REPLACE PACKAGE cls_vars AS

  -Constants

  const_yes CONSTANT VARCHAR2 (1): = 'Y ';

  const_no CONSTANT VARCHAR2 (1): = 'n';

  const_active CONSTANT VARCHAR2 (1): = 'A ';

  const_inactive CONSTANT VARCHAR2 (1): = 'I ';

  FUNCTION get_const_yes RETURN VARCHAR2;

  ...

  END;

  /

  CREATE or REPLACE PACKAGE BODY cls_vars AS

  FUNCTION get_const_yes RETURN VARCHAR2 IS

  BEGIN

  RETURN const_yes;

  END;

  ...

  END;

  /

  Kind regards

  Zlatko

• In the dialog box constant value

  Hello

  Is it possible to keep the values in the dialog box once I entered? I mean there is value if I run the script again?

  var myWidth=prompt("PLEASE ENTER YOUR TEXT FRAME WIDTH VALUE (IN POINTS)","")
  

  For example if I get 10, next time, that the default value must be 10.

  

  Not sure we can use const not variable (var)?

  Kind regards

  Kitty

  Well, not quite. Before displaying the prompt, you want to extract the label. So move the line before 04 08 and change 04 to something like:

  myWidth = prompt ("Enter etc...", myWidth)

  and then it should work. Obviously, test it first.

  Ariel

• Procedure to another procedure call, how to extract values

  I have couple of procedure in a package and I try to call proceedings in procedureb.
  

   TYPE T_CURSOR IS REF CURSOR;
   PROCEDURE ProcedureA (acct IN number, o_cur OUT T_CURSOR)
   AS
   BEGIN
        Open o_cur for
         SELECT A, B, C, D, E, F FROM DEMO;
         
   END ProcedureA
   
   PROCEDURE ProcedureB (param1 IN number, param2 IN number)
   AS
   get_cursor                 T_CURSOR;
   BEGIN
   
   ProcedureA(111, get_cursor);
   
   END;

  How to extract the values of proceedings in ProcedureB? And also I want to get only columns A and B in ProcedureB.

  >
  How to extract the values of proceedings in ProcedureB?
  >
  Try something like this

  TYPE rectype IS RECORD (colA  demo.a%TYPE, colB demo.b%TYPE    );
       rec1  rectype; 
  
  LOOP
    FETCH get_cursor   INTO rec1;
    EXIT WHEN get_cursor%NOTFOUND;
          DBMS_OUTPUT.PUT_LINE(rec1.colA);
       END LOOP;
         DBMS_OUTPUT.PUT_LINE('end test'); 
  

• How to specify a constant value in the external tables?

  Create table cp_portfolio_ext
  (
  rec_type                                                varchar2(1),
  acct_nbr                                                varchar2(23),
  acct_title                                              varchar2(50),
  prod_type_cd                                            varchar2(5),
  acct_desc                                               varchar2(35),
  country_code                                            varchar2(2),
  acct_ref_ccy_cd                                         varchar2(3),
  nom_accr_int_amt                                        number(20,4),
  ineligible_cash                                         number(20,4),
  pldg_amt                                                number(20,4),
  posn_as_of_dt                                           date,
  moody_rating                                            varchar2(5),
  sp_rating                                               varchar2(4),
  mat_dt                                                  date,
  anl_pct_rt                                              number(20,6),
  acct_pp_cd                                              varchar2(10),
  filler                                                  varchar2(229),
  process_status                                                  char(1)
  )
  Organization External
  (
  type                    oracle_loader
  default directory     TEST_DIR
  access parameters
                      (
                           records delimited by newline
                           fields
                                (
                                REC_TYPE                            POSITION(1:1),
                                ACCT_NBR                            POSITION(2:24),
                                ACCT_TITLE                          POSITION(25:74),
                                PROD_TYPE_CD                        POSITION(75:79),
                                ACCT_DESC                           POSITION(80:114),
                                COUNTRY_CODE                        POSITION(115:116),
                                ACCT_REF_CCY_CD                     POSITION(117:119),
                                NOM_ACCR_INT_AMT                    POSITION(120:139),
                                INELIGIBLE_CASH                     POSITION(140:159),
                                PLDG_AMT                            POSITION(160:179),
                                POSN_AS_OF_DT                       POSITION(180:187) DATE "DDMMYYYY" NULLIF POSN_AS_OF_DT ='00000000',
                                MOODY_RATING                        POSITION(188:192),
                                SP_RATING                           POSITION(193:196),
                                MAT_DT                              POSITION(197:204) DATE "DDMMYYYY" NULLIF MAT_DT = '00000000',
                                ANL_PCT_RT                          POSITION(205:215),
                                ACCT_PP_CD                          POSITION(216:225),
                                FILLER                              POSITION(226:454),
                                process_status               
                                )
                      )
  location('ODS_CP_DAILY_EXTRACT.DAT')
  )reject limit unlimited;

  I won't receive flow file process_status, but I would like to have a value by default "n" must be provided. How to get there? I tried to use defaultif, but it does not work it.
  
  I know that you donw with the CONSTANT Keywork using sqlloader. But what in external tables. ??
  
  Published by: 792353 on September 30, 2010 21:21

  I think it should useful to you

  http://Jiri.WordPress.com/2010/03/29/Oracle-external-tables-by-examples-part-4-column_transforms-clause-load-CLOB-BLOB-or-any-constant-using-external-tables/

  Iqbal

• Call doSubmit() with custom value does not update process

  I have a page with a standard form that has a "Save" button, but also a button that I have manually created via an anonymous PL/SQL block in the source of the element of a field on the form. (I did because I was already using a PL/SQL block to display the value of the item, but wanted to update the button appear immediately next to him, rather than somewhere on the page template.)
  
  Originally, this button was just a simple redirect to a separate detail page, but I found that if the user has made changes to the form, then click on this button, these changes would be lost. So I changed it to a call doSubmit() instead. But I had to distinguish between the user pressing the "Save" button and the custom button, the button call doSubmit ('CUSTOM'). I then created a branch that has verified the value of demand and went to the appropriate page that was pressed.
  
  What I found was that the process to update the underlying table for the form had not shot, even if it is unconditional, and therefore updates the original form have been lost.
  
  I eventually worked around this by changing the button so that instead of calling doSubmit with a custom value, it calls a JavaScript function that: 1) define a hidden field to '1' and 2) called doSubmit ('SAVE'). Then, I changed the direction to look at the value of this hidden field, rather than the value of the request. That has worked well.
  
  So this got me thinking: why my original implementation did not work?
  
  I suspect that doSubmit() only works to the custom of the values if you have defined a real button in the designer of the ApEx and configured with a name for this custom value. The HTML code for my button seems indistinguishable from a button created by ApEx, I think that there is something that happens behind the scenes to make doSubmit() work simply with a random value.
  
  Can anyone confirm or deny this hypothesis?

  Hello

  Could this be your problem:
  If you have a treatment of automatic line (DML), which only fires from below, if I understand correctly

  Valid Update Request Values: SAVE, APPLY CHANGES, UPDATE, UPDATE ROW, CHANGE, APPLY, APPLY%CHANGES%, GET_NEXT%, GET_PREV%
  Valid Insert Request Values: INSERT, CREATE, CREATE_AGAIN, CREATEAGAIN
  Valid Delete Request Values:DELETE, REMOVE, DELETE ROW, DROP
  

  At least on Apex 3.2

  BR, Jari

• Search index of the secuence valuation until you reach a constant value table...

  Hello

  I have an arry of secuence RR values (its peak at the time of peak of ECG wave is seconds). I know that the added value of the paintings is the total time of sample data.

  I would like to separate in different charts in the representation of every hour of recorded data.

  I need to get a way to get the index where the number of added values are-online 3600 s (1 h).

  So that I can know the index of the arrays values to get the correct index in chart 1 h values, another index for another hour for an another graph,... so until you get the hourly chart several data can show.

  I hope you understand me.

  Best regards.

  Modulo division is performed by the function Quotient & remains on the digital palette.

  

  Work with tables and data DBL or integer types.

  When I use the method that Mike designed, in my view, the VI sometimes lacks a time transition. This happens with the simulated data that I generate because it is possible that the rest is different from zero. For example, this can happen if the accumulated sum is 3599.4 s and the next RR interval is 1.3 s. Which gives the following sum = 3600.7 s. The conversion by multiples of the amounts of 3599 and 3601. The remains are 3599 and 1 after modulo division. None are exactly equal to zero.

  I've changed this option to use DBL and then look the big negative transition. The minimum value may be with the largest range of RR in the data. However, there is always a great transition close to 3600 to near zero.

  Lynn

• single-precision changes constant value

  See attached 'vi '. If I set a digital double precision on my schematic, change it to SINGLE-precision, then enter the valeur.001 inside, he adds values to the right of the decimal point. Why would he do that? I'm using Labview 2011 SP1.

  Display telephone and take just a guess.

  The accuracy is defined in bits and a lot of fractional values is not a translation exact decimal.

  For example 0.001 cannot be represented exactly in the sgl or dbl.

  This is inherent to the representation of floating point and not language-specific. You simply download the closest value possible. Assign the DBL and change the format to display 20 decimal digits. Same difference.