CD-Rom XM - 1802B on DVD upgrade

Similar Questions

• Pavilion slimline s5-1014: CD rom is not working after upgrade Windows 10

  My Cd rom no longer works after upgrade to windows 10.  I read the posts that I should go to Device Manager to update, however it doesn't appear in the device driver.  How to solve this problem?

  Thank you

  Hello:

  Try the steps listed in 4 of the resolution on the link below...

  https://support.Microsoft.com/en-us/KB/314060

• error code 39 on Hl Dt - St CD-Rom GCR - 9493 B DVD / CD

  HL-Dt - St CD-Rom GCR - 9493 B DVD / CD Code 39 Message says windows can not load this hardware device driver may be corrupted or missing

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello
  Try this:
  http://support.Microsoft.com/kb/306318
  b Eddie

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• CD player does not read the CD ROM and CD music, DVD works fine

  My HL-DT-ST DVDRAM GSA-H42N DVD and CD player does not read the CD ROM and CD music, DVD works fine

  Hi Anil,

  We recommend that you download and run the Microsoft Fix and check if the problem persists.
  See your CD drive or DVD drive is missing or is not recognized by Windows or other programs

  See also: http://support.microsoft.com/kb/321641

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a DVD upgrade Lightroom 5 to 6 of Lightroom?

  I currently 5.7 Lightroom I installed initially dvd.  I'd rather have a DVD upgrade rather than download.

  Adobe has a DVD upgrade available?

  I am running Yosemite (Mac OS 10.10.3) on an old iMac.

  I also use Lightroom on an old MacBook Pro.

  Both versions are allowed.  I guess I can until Lightroom on both computers with my present perpetual licenses.

  Thank you.

  Hi Bobbi-

  You can buy Lightroom 6 as part of the package photography creative cloud, part of the creative cloud, as a stand-alone product or as an upgrade of the product. You can buy products not cloud here: products

  You can buy the products of clouds here: pricing and membership creative cloud plans | Adobe Creative Cloud

  If you want a dvd instead of a download, the product can be purchased as a dvd for dealers boxed product, but if you only need an upgrade, you will need to purchase the upgrade online.

  There is more information here:

  How can I buy Lightroom?

  Guinot

• My DVD ROM does not recognize DVD discs after upgrading Windows XP to Windows 7.

  A few days ago, I updated my laptop to Windows XP to Windows 7. Everything seemed to go well until I tried to burn a DVD disc. The program I use for this purpose is Nero 9.4.26.0. So, I've discovered I don't have problems with writing and playing the usual CD but my laptop does not recognize and does not read or write DVD. Laptop HP Compaq 6510 b and the DVD ROM is MATSHITA DVD - RAM UJ - 860H ATA DEVICE. Please share your ideas about the problem. I really enjoyed this :)

  Some CD / DVD readers may require an update to function well in Windows 7.

• DVD Rom does not recognize DVD

  CD/DVD-Rom is not recognize my DVD

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Re: Satellite Pro A300 - 2C4 "Windows 7 Professional Upgrade DVD" upgrade

  We have a Satellite Pro A300 - 2C4 (bought on 23-11-09) that came with Vista Business 32-bit installed, but has been downgraded (using the provided diskette) to Windows XP due to the demands of corporate network.

  When Windows 7 became available, I bought the DVD to upgrade to Windows 7 Toshiba provided so that if the company decided to upgrade to the new operating system, we could do it on this laptop.

  That's what I tried recently to discover that we can't do as the DVD is for Win Vista upgrade Windows 7 Pro. What is the best way to upgrade without having to buy another drive to upgrade. I have a set of recovery disks for an another Toshiba SatellitePro A300 - 2 4 which was bought about 2 months before this one. These were created using the Toshiba recovery software before any changes have been made on the laprop. Would I be able to restore the system to its state of Windows Vista using these disks and then use the Windows 7 Professional Upgrade DVD to make the upgarde?

  Suggestions or recommendations would be greatly received.

  This upgrade package offered by Toshiba is upgraded from Vista to Win7. So if you want to use it, you must install Vista recovery image at first.

  After that, you can upgrade pre-installed Vista to Win7 following the Toshiba s implementation instructions.
  I did the same thing my Qosmio X 300.

  If you cannot use created recovery disc either s order Toshiba Vista recovery disk or (perhaps the best solution) install the clean version of Win7. A300 is fully supported for Win7 and you can download all the necessary drivers and tools specific to Toshiba and utilities.

• Example: Pavilion p6523w: can a hp DVD Ram GH40L sata cd rom writing on a DVD dual layer?

  Spoiler (Highlight to read)

  

  

  I need to know if this burner will write a double layer DVD R.  It's a HP DVD RAM GH40L Sata cd Rom

  Hello
  
  It should do, but to check you can visualize all the multimedia capabilities of your optical drive using the free app at the following link.
  
  http://www.VSO-Software.fr/products/Inspector/Inspector.php
  
  Kind regards
  
  DP - K

• DVD / cd - rom not find disc dvd

  Hello. When I put disc in the drive, nothing has been found. December midle evrething was ok, I can read the dvd.

  I try troubleshooting - configuration of a device. They can fix isuues, they show 3 problems: hp DVDRAM GU70N has a driver problems - not not fixed, USB - if xHCI host USB controller has a driver problem - not not fixed, material changes could not be identified - detected.

  I'm trying

  System - Device Manager - DVD/CD-ROM drives - hp DVDRAM GU70N status - properties drive - peripheral:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Driver is up to date and show only the CD - ROM Drive

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• HP Compaq Desktop 6000 Elite: Replacement DVD-Rom drive with HP DVD + RW/CD-+ RW

  OK, I have a HP 6000 Elite with a DSVD-Rom (Multi Player) drive.  I would like to replace this drive with a model HP DVD + RW / CD + RW #447310-001. Drive TS-H653 410125-501.    Search for cases iside the PC, I find there's black wire to one (1) and a 1 connector with 2 black, a yellow, a red son.   No one knows it is all the cable/connector that is required for the DVD + RW / CD + RW drive market?

  I read where it is a connector cable BLUE on these units.  If so, where I buy this cable?

  Thank you

  Hello:

  Yes, you just put the existing cables from the old dvd drive to the new.  Nothing else is necessary.

  You can consider a used but tested and working one on eBay. Saves a lot of $$$ than buying again at HP.

  http://www.eBay.com/Sch/i.html?_FROM=R40&_sacat=0&_sop=15&_nkw=447310-001&RT=NC&LH_BIN=1

  When I buy off lease HP business PC that do not come with a DVD - RW drive, that's what I do.

• CD/DVD-ROM for reading CD / DVD RAM only...

  I reinstalled Windows XP due to problems with my system works only with Win7.  I did a clean install.  Windows XP installed a generic driver from microsoft CD/DVD RAM.  For this reason, I am not able to access the DVD ROM discs, no discs as CD ROM and DVD RAM disks.  I know that there is a way to change things so the system sees that I have a DVD ROM and not only a DVD RAM.  It's just think WinXP that my readers are only DVD RAM drives work very well.  They work perfectly with CD and CDR/RW and will work with a store bought DVD.  I just can't figure how to change the generic Microsoft for DVD RAM DVD ROM driver  I had this problem before, I don't remember the fix. I deleted the registry entries, I deleted the readers, only for have reinstalled them with the original drivers.  I have 2 drives, both are LiteOn.  LiteOn has no drivers for the drive and says they are "plug and play".  Any help would be greatly appreciated.  Thank you.

  I tried this also.  He said: there is nothing wrong with my CDROM or it says that my CDROM is not able to write DVD and install one that can.  Thank you.

  To access device manager > right click on the CD/DVD rom device and choose uninstall. Restart the computer and allow windows to detect the new hardware.

• CD rom will not play DVD

  When I insert a disc and try to play a cd or dvd, I get the response "Please insert a disk".  I was in the Device Manager and clicked on cd rom and the device works correctly. I tried updating the driver but that you have the most up to date for my system.
  I did a Checkup and was informed that AutoPlay is not enabled on my cd rom, someone knows how to do this?

  Hi Doreen,.

  If you do not have any filter upper and lower filter. No need to make changes. Close the registry editor.

  Please uninstall any software like Nero, roxio of CD burning. Then uninstall the drivers from the CD/DVD. Try to reinstall it from your manufacturers Web site, using your computer model number.