Camembert in tiara

Similar Questions

• iCloud icon 'Camembert '.

  Nobody knows what 'Camembert' is next to the iCloud drive icon in the finder (see screenshot below).  For me, it has not moved for a while.  In my view, it represents the part of the storage you use?  I don't think it's a progress indicator as my files all seem to be fine.  I google and nothing found...

  

  Which indicates that it is the synchronization. When all files are synchronized there should be no icon there.

• tiara

  Hello

  Just a general question about the tiara. Can DIAdem fast fourier transformation, smoothing of curves, differentiation and integration of graphics? What are the features of DIAdem compared to other graphics packages?

  Thank you.

  The CORRECTION of OFFSET feature that should do it for you:

  In the Panel ANALYSIS, take the first library called 'Functions of channel' - offset Correction

  

  The dialog box that opens, you should get where you need to be...

  Otmar

• Tiara of exit without displaying message to save c#

  Hello

  So I wrote a c# program that uses the tiara to extract data from a file.  It works great with help I asked a few days ago, but I'm looking for a change to make the program even easier use.

  I use TOCommand oDIAdem = new TOCommand (); to control the tiara in my c# program that works very well, but I hope that there is a way to remove the output dialog box that appears when the program ends.  I've attached a screenshot of the output dialog box that appears.  It is not a huge problem, but I would like to make the simplest possible program for the person using it.  Any help is greatly appreciated.

  Thank you!

  oDIAdem.CmdExecuteSync ("datadelall (1)")

  should be an easy fix. It erases just the portal.

• Export to a CSV of tiara does not produce a CSV file!

  Seems strange but exporting to a CSV of tiara does not a CSV file.  Tiara produces a tab delimited file, which is obviously not a CSV file.  Tiara aid said even the 'CSV' file is a tab-delimited.  The software expects a comma as delimiter does not read the file properly created tiara.  It is possible to specify the correct delimiter?

  You can ask the decimal/separator, you need if you start exporting CSV from a script

  Call DataFileSave ("C:\temp\EXAMPLE.csv ', 'CSV')

  See also http://forums.ni.com/ni/board/message?board.id=60&message.id=8851&query.id=146775#M8851

• Tiara 2015 fails to start (Win 7)

  Whenever I try to start DIAdem 2015 on my Windows 7 computer, I get the error ' tiara: DIAdem.exe - Entry Point not found ". Here is a picture of the screen of the error.

  I tried to reinstall both camps tiara but get the same error. (I also tiara 2012 on my PC and it worked fine before, now who is also giving the same error).

  Also DataFinder.exe doesn't and fails with the same error. One of the messages said to reinstall OR ICU from the DVD DIAdem will correct this problem. I found NEITHER-ICU Version 15 on the DVD and tried to install it, but the installer would not install 15 NOR-ICU and says that it cannot install because a newer version is already installed. I can't find OR ICU under control panel > programs and features >, so I can't uninstall the ICU-OR corrupt that is probably causing all these errors.

  Can you please help? Thank you.

  

  Hello RagMan,

  I agree that the ICU is probably damaged. It seems that you have a mixture of old and current ICU binary on your hard drive, which causes this error.

  It's very special and I like to discuss possible solutions with you - of course, I'll post the result here.

  Please post here your e-mail address so I can contact you.

  Thank you, Dieter

  National Instruments Engineering GmbH & Co. KG

• 2D axis graduation Bug in reports (Tiara 2014)

  Hello

  I ran across a rarther annoying bug in 2D for reports of scale axis.  Here's how to recreate:

  1. Load a dataset that contains the x and y components.
  
  
  2. Create a new presentation in the report tab
  
  
  3. In Sheet1, add a Simple 2D axes system.
  
  
  4. Select x and y of the dataset object and drag it in the 2D axis system.
  
  
  5. Change the scale of "Completely automatic" to "manual".
  
  
  6. Change the number of "Begin" to something near the tiara set by default.  Do not touch the number of 'end '.  Click OK.
  
  
  7. Add Sheet2 and repeat steps #3 to #6 on Sheet2 with a different dataset.
  
  
  8. The two parcels well look now...
  
  
  9. Go to Sheet2 and double click on the map to reveal the curve and the definition of the axis.
  
  
  10. Do not touch anything... just click on "Cancel".

  After you click Cancel, the scale of the axis 2D completely changes.  I think what is happening is that the tiara takes everything the previous issue of 'End' was and who uses instead the number of 'End' you want.  In addition, you have not actually to enter the curve and the definition of the axis to create this bug.  Press cancel if you change something like text (for example)... curious bye bye.

  Also, if I go back the and redefine scaling on automatic mode, click Preview to update the plot, then opt for the manual mode, all seems good.  However, if I copy Sheet2, the plot on Sheet2_Copy1 is messed up the same way as if Sheet2 is OK, but I hit Cancel.

  Worse still, the undo function does not work on this unwanted change of scale.

  This is a bug that makes plots in the report almost unusable files.  I hope it's re-producable on other systems if a patch can be issued.  Let me know what you find.

  The only solution I found is to click OK instead of cancel, which is not always preferred.

  Thank you

  Jacob

  Hello jrasco,.

  You are right. There is a bug in DIAdem 2014. We have set for the DIAdem service pack.

  Here is the link to the 2014 DIAdem English SP1

  Thank you

  Walter

• PDF Export tiara filled area

  Hello

  I use DIAdem 2011 SP1.

  I have a chart with a curve as "filled area.

  The parameters of the curve of the backfilled area are:

  Line color: Blue

  ...

  Color fill: Blue

  Transparency: 90%

  Transparency is necessary, otherwise the grid is hidden by the area filled in the diagram.

  Tiara shows the report correctly, but in the file exported PDF zone is in blue with no transparency.

  (The area was backfilled black in the file PDF if DIAdem 2010 is used.)

  (The report is printed correctly directly from tiara).

  If anyone can help with this?

  Hi Johann,.

  The PDF driver that installs with DIAdem does not support transparency.  However, starting with DIAdem 2011 you congifure REPORT to restore each sheet as a PNG image in high definition and send those PDF driver rather than the gross REPORT screens.  Select the settings menu > Options > REPORT... and then check the box 'print output as image data.

  

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• 3D model annotation of tiara

  HI, I use Labview and tiara to test and grind outages of a complex engine system where I want to put the engine 3D model in a screen and highlight or annotate instructs the operator for failure and repair.  How should I do for the optimal design of these 2 products?

  Hi id,.

  Look at exercise 7 in the following exercises of Hands-on tiara (older).  I dropped this exercise in future versions, but the process has not changed since then.

  diadem_version_11.1_hoe.doc

  in the event that the link above does not work, here is the General web page:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5393

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• With the help of tiara, how to get the slope of a signal (linear or nonlinear)

  Speed of rise or precipitation rate and the temperature of the signal, I am trying to sign up the slope in my report using DIAdem,

  I could not find, is there a function of slope?

  or a way to do

  Thank you

  Na'amat salvation,

  You can get the calculation of the slope to climb the built-in "ANALYSIS > Curve Fitting > calculate regression."  If you want to adjust only a subset of the data, you will need to extract this subset of data to a new data channel, and then initiate the calculation of reconciliation on the new channel.

  Here is a script I created to do the calculation of extraction and statistics/slope range automatically.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to customize the tool tiara?

  Hello

  Problem

  Is there for me to add custom button or feature in tiara using LabWindow program?

  Requiremnts

  Custom button will run my not enforcement next CVI:

  • import a binary file to another format to CSV
  
  
  • automatic load this file into DIAdem
  
  
  • view the graphical display
  
  
  • Auto save CSV format TDM/PDM
  
  
  • Run the report.

  Please take a look at www.ni.com/dataplugins. There is a link 'the DataPlugins programmer reference guide' with the manuals and documentation. The language is VBScript. VBScript is used as a kind of glue code to set up the functions doing the real work.

• Problem exporting to tiara

  Hello

  I use a data acquisition card 6070E read the output of a sensor. I have a problem, export the data from the labview to tiara program.

  When my vi stops running, it displays the information on a waveform graph. I right click on the waveform graph and select "Export data to DIAdem", it opens the tiara, but randomly sets some values to zero, the duration and the actual values... It is sometimes only one or two data points, but sometimes (as pictured), it completely distorts the data. I have attached the vi and also an image of how it exports to tiara... The diagram should be with 10 cycles of a sinusoid of 10 Hz.

  Is there something I can do?

  Thanks in advance.

  Hi Sadegh,

  It of about a year since I looked into it, but I think all you need to do is to completely stop LabVIEW, use the attachment VI to replace the existing file on your hard disk, and then restart LabVIEW.

  ...\LabVIEW 2010\vi.lib\ExportToExcel\exportToDIAdem.vi

  Let me know if this doesn't

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Tiara special plot

  Hello

  I have 2 data in Labview, we're a couple time and Temperatura x time x. I want to put this in a report in a way I'm havo two pieces of information in the same chart, but without going through the plot. My idea is to make the bones of color temperature curve x acodding time change to the value of the couple at the same time. So when the torque curve will be red and when the couple is low the curve will be gree, and between the maximum and minimum values, I have a range of colours...

  What is an easy way to do it?

  Thnx

  Hi Marcus,

  You must double-click the 3D graph and check the legend box in the lower left corner of the dialog box to display the legend.  After that, you can click on the 'Settings' button to the right of the "Legend" box to change the appearance of the legend.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Import of Citadel to tiara Gets the values of bad weather

  I installed a data store and pulled in the variables of storage in a Citadel 5 database. 99% of the data is very good. I wrote the data in the base of the citadel in a Labview program with writing trace vi. Now all data stopped and started it has a value of 0 for the gage, and reads the timestamp '? /?? /???? ??:??:??.????." I tried to delete these bad data with the function "No. Values", remove, but it failed.

  The dataset is 4e6 lines long, is not reasonable to do it by hand. Any suggestions?

  Hey gpburdel,

  Yes, you will need to run a VBScript script, but at least it is a simple VBScript:

  L1 = NOC ("H10G4_lvdt.time")

  Call FormulaCalc ("Ch (L1): = Ch (L1) + NoValue * (Ch (L1)")<>

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• What is the equivalent of tiara to "continue to"?

  Hello

  I have a loop, which allows me to treat several different files at the same time group that has a "If...". Then check at the beginning of the loop to make sure that each group can actually be treated." If a group failed, I just want to be able to jump to the next iteration of the loop there.

  In VBA, I know I would use 'Continue For', how would I do this in tiara?

  <>0 then
  
    x = ChV(x,"Group/Channel")
  
  On the other
  
    Call ErrorHandler ("can't find x.")
  
    Continue for
  
  End If

  Thank you.

  It didn't continue.

  I move the code to a sub and use the sub output.

  I have Sun: For i = 1 to 10
  
   DoWork I have
  
  Next
  
  Void DoWork (i)
  
      If 2 = I then
  
        Exit Sub
  
      End If
  ' ...
  
  EndSub