camera lights

Similar Questions

• Green light for the camera lights up whenever I go out full screen

  Noticed for the first time tonight-

  Whenever I'm in mode full screen, be it an application or a video (youtube, Plex), when I exit full screen, the green on my Macbook Pro mid-2014 retina camera flashes market and stop once. It's very relative if it only happens to me:)

  I am running the latest version of El Capitan. Everyone knows about this problem? It happens no matter what app I leave full-screen - the Green camera light flashes.

  Mine is not flash, but if it only happens once, I wouldn't worry on this subject.

  If you are still worried, one of them will fix any problem camera correctable user:

  (1) If restarting your Mac does not solve your problem of camera,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above user solves your problem, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.3

• iMac 5 k camera light does not

  I have an iMac 5 k, 27 in late 2015 and the camera light on just by itself last night and it will not turn off. I tried to reboot, different types of resets and re installed the operating system. Always on. I ran a diagnostic script, I found somewhere in this forum and there were my results. I appreciate really if any experts in this forum could take a look at this and let me know if I can do something. Thanks in advance.

  It is the result of the diagnostic script. http://pastebin.com/NkD7AhLN

• Camera - light problem

  When I work with camera I put the light as in a play.
  If I want to have a picture in the room with light and it s natural look can somehow do so 3D light does not affect this image?
  / Mattias
  
  

  Parameter accepts the lights on the OFF image layer should do what you want. AA reveals the option.

• camera front 7 flicker HDR in FaceTime iPhone

  Today I got my new iPhone 7. During a FaceTime call my video is constantly changing from light to dark. When I moved the focus of the camera (light of early evening) to bright light right behind me the HDR treatment is nog seem to know the correct brightness levels. This caused my camera of clear image flickering in dark. Not a very nice way to have a FaceTime conversation. Someone else has the same problems? Should this be fixed in a hotfix or the auto HDR mode can be turned off somehow?

  Same problem here, but it flashes without moving... at all: the phone seems to be worse when there is a white background! In the meantime the entire screen flashes a light green for the Viewer.

• My camera in the s230U of twisting after upgrade to win 8.1 shows a diagonal cross

  After windows 8.1 update I can't use my camera for Skype in my S230U twist and take a snap. It shows a diagonal cross in the picture of the camera, but the camera light appears, .getting click but the camera couldn't take a picture or use the video in Skype. Any solution please.

  After Google search on the problem that I did the knowledge of the new additional features in the lock for camera screen to win 8.1 and I could correct them and now it works.

• T430s built-in camera works is not in Windows 8

  Hello!

  In Skype when I test the camera light turns on, but no picture not transferred. If I remember correctly, it worked correctly on Windows 7

  Or you can try this on your Skpe setting on this thread...

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T430s-camera-not-working/m-p/1093683#M77910

• sync the camera with outputs daq

  Hello

  I am a newbie of LV, your patience is appreciated

  I work with a gigabit Prosilica GE 680 camera connected to my computer via Intel PRO 1000 G/T and I also work with a M NI USB 6212 BNC series. Connected to the nor-daq is a source of light on each of the AnalogOut0 and AnalogOut1, as well as 3 analog: read analog two of the three outputs, the other entrance is a signal of the camera by saying that it is imaging or not.

  I was debugging the code from someone who is no longer around to help. The code basically allows the user to synchronize two things: 1) capture and recording of a number of specified length avi, which in my hands, is typically movies of 2 sec to 200 images per second AND 2) to turn off the two sources of light at times during the movie and specified. The problem is in the precise timing of the light sources with the camera exposure period.

  From now the lights turn on and off in my movies, which is good. The problem is that the camera lights late compared to the signal of departure as evidenced by the output signal "imaging" sent by the camera in one of the analog inputs. The result is that the lights seem to lights at the beginning of the avi saved since the movie begins later that it is specified. It's not ideal.

  What changes should I make to the labview code to make sure that the camera is precisely synchronized with the analog?

  Thanks and let me know what information you need from me.

  -Alex

  Hello again,

  I solved the problem. It was a hardware problem. Using SyncOut2 instead of SyncOut1 on my camera Prosilica 680 GE gave me the schedule that I specify. No major code changes was necessary, other than changes to support the change of equipment.

  The question remains as to why works SyncOut2 and SyncOut1 does not. After consulting the technical manual for the camera, I realized that the use of SyncOut1 requires that I use the ground isolated on 12 IO pins my camera. Although I am a novice to the electronics, it seems to me that this would require a line that goes from the isolated ground my mass of the external circuit DAQ. I didn't get it, even if I did when I tried SyncOut2. This missing connection can have an impact on power SyncOut1 send a trigger to the acquisition of data.

  I understood what the analog input wavegraphs look like now that the timing is good.

  Despite the outstanding issues I will mark this as resolved issue.

• Probmel with the camera

  Hello. I would like to find a solution to my problem. Using Skype, I called one of my friends yesterday. We talked almost two hours, with interruptions because of the wireless Internet connection. Suddenly, my camera is stuck and the luminous sign remained light. Saying luminous sign, I want to say the light that lights up when someone makes a call.  I have no idea on what's happened so far. The camera light is still on. I can't use my camera now. Could someone help me solve the problem please? Thank you very much.

  Hi @AngelaElefther,

  Thanks for posting HP forums!

  I came across your post about the laptop webcam no longer works. I want to help.

  In order to better assist you, please provide the product number of your laptop and the version of Windows installed on your laptop.

  Computers how can laptops HP - I find my model number, the serial number or product number?

  Looking forward to your reply!

• Pavllion HP dv9000 / web cam: changed O C from vista to WIN 7 cam does not appear without being on "Yahoo Messenger".

  I can not get my web cam lights up now, as I did, until I upgraded to the Tower of vista (32) to windows 7.

  Hello

  HP dv9000 Pavllion's system is not compatible with Windows 7, this is the reason that the Web cam does not work on the system, I suggest you to download the drivers for the Webcam from the link below and install it in compatibility mode and check.

  See the article mentioned below to install the drivers in compatibility mode.

  Make older programs in this windows version

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Download the Webcam utility from the link mentioned below (the software).

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1842189#N6309

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The camera page blank after the first use

  Hi all

  I'm having a problem with getting a QR scanner works properly. The weird part is that, after that I scan once, the viewfinder of the camera no longer appears on the screen.

  Here is the flow of the page that I currently have:

  When the user opens the app first...

  1 splash screen

  2 splash screen opens automatically the screen of landing page when the user is presented with buttons.

  3. the user selects that they would use the QR scanner

  4 QR scanner page opens, the camera turns on and appears on the screen of BB.

  5 QR code is scanned, decoded, and a results page. (QR page is popped immediately pushes forward the results page)

  6. the user presses return and returns to the landing page

  7. the user selects the QR button again

  8. the user will see a blank screen, but the camera lights.

  I'll have to clean up the code before I post. I use the BarcodeScanDemo example in the JDK BB

  I think I've figured this out.

  I expect that the QRPage would have pushed first when I ran this code:

  UiApplication.getUiApplication () .pushScreen (new QRPage());

  But really what was going on, it was that inside the QRPage I also called pushScreen method. These screens have been rushed first and when finally returned to new QRPage() call, it was pushed on top of all the other screens.

• Windows 7does has not transfer images from camera Canon

  The small window that used to provide options to upload the photo of camera lights no more

  The small window that used to provide options to upload the photo of camera lights no more

  =====================================
  Maybe your AutoPlay settings need to be adjusted.

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

• After the movements of camera effects?

  Hello

  I am currently working on an animation, and I have a small question. So far, I've been moving everything in my composition around the monitor to make it look as if the camera was moving around them and not vice versa. I was wondering, is there another way to do it, as for example, movement of the camera itself, with the ability to set keyframes for it, etc.?

  Thank you

  Jack Reynolds

  After Effects CS6, Windows 8.1

  This page contains information about the animation and the moving cameras:

  Using After Effects | Cameras, lights, and points of interest

  Start here learn After Effects:

  http://Adobe.LY/AE_basics

• Camera layer do not animate?

  Hello

  I'm working on a project where I need the camera to move within the frame. I tried to do it by setting a camera on the timeline layer and by animating keyframes. This doesn't seem to work, what I am doing wrong?

  Thank you

  Alex

  

  I see not all 3D layers in your composition.

  After Effects help:

  http://helpx.Adobe.com/after-effects/using/3D-layers.html

  "Only the 3D layers interact with cameras, lights and shadows."

• My Macbook Pro updated the iTunes 12.4.1 on 3 June 2016

  I have've had problems with a temperamental computer since the update of 3 June 2016. I can barely type comments and the computer jumps around one thing to another. I even had the camera lights. What is the iTunes or is it the computer?

  Leslie

  You see this behavior in iTunes?

  TT2