Camera PrivacyPosition when the system is idle

Similar Questions

• Moto G4 - push notifications to stop functioning when the phone is idle / inactive

  Hello!

  I have a very annoying problem with my G4 bike purchased in the UK.

  Problem:

  My push notification comes to app and gmail to stop working when the phone is idle / inactive.

  When I use any application or when I put just the phone side push notifications work fine. They appear on the lock screen and beep.

  After a few minutes of not using the phone, the message to stop the spread. The sender indicates that a tick and the Moto G4 does not show notifications of type push until the phone is activated and unlocked. It is very annoying, because I already missed several attempts to call. This problem occurs with the Wifi or data plan. It is not a What'sApp of settings as it works very well for a while.

  Text messages and phone calls work well, just a data plan seems to go off when idling and never come back until unlocked (even then it takes a while). WiFi seems somehow to maintain a connection.

  I tried:

  • change What settings the sApp
  • disconnection/connection gmail account
  • remove the operating system of the device cache
  • disable the whats of ap battery saving options and all services appear to be relevant
  • WiFi seems somehow to keep the phone, but only data stops immediately, sending fn when idle
  • Restart in safe mode-> the same problem with meeting places. WiFi seems to work, data plan do not when idling

  Is this a known issue? Everyone knows the problem? To me, it seems that the camera seems to move from the internet and do not reactivate until this that unlocked.

  Any suggestion would be appreciated,

  Thank you!

  It seems to work now after clicking: 'Reset the settings App' in the top menu right in "parameters - apps-> gear-> battery optimization"!

  I haven't seen this solution anywhere else. I did the reset done only because I tried to disable optimization for almost all applications gradually. Without success, I clicked on 'Reset the settings App' and suddenly push notification for all work! Yes!

• Keyboard stops working when the computer is idle

  I have an ASUS desktop and windows 7.  When the computer is idle for a few minutes, the keyboard farm operation.  The mouse works fine.  Tried a new keyboard and no solution.  Tried a different USB port and the same thing.  If I restart my computer, it works fine until it is idle for a few minutes and then stops again.  Really frustrating.  any ideas?

  Original title: keyboard closed unexpectedly

  Hi Majohnson,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. This is not the exact model. your ASUS computer?
  2. The issue has started happening recently? If so, did you do the computer-specific changes before this problem?

  The question could arise is there some problem of corruption of pilot partners or a third party service interferes with the function of the normal keyboard. In order to diagnose and resolve the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem persists, try the following method.

  Method 2:

  If you have any security software installed on your computer, try to temporarily disable the security software and check if the key words work properly. Subsequent update of the security after a repair software.

  Disable the anti-virus software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See method 3 for additional assistance on the issue.

  Method 3:

  Uninstall and reinstall the drivers USB controllers. Use Device Manager to uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the keyboard and test to make sure that the problem is solved.

  For more information, please refer to:

  Updated a hardware driver that is not working properly

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• How doi get back my locked icon saying when the pc is idle

  How can I get my icon saying locked when pc slowed down? He lost

  The settings I gave you will achieve what you want.  When the PC is idle for the period indicated in the screen saver, the PC crashes and when you move the mouse or press a key to try to resume will show your user icon and you won't not resume until you have clicked on the icon.

  You can configure the PC to sleep instead of indulging in idle screen.  If this is what you want then substitute another step 1: -.

  1 the active {power plan} change plan settings, power, options change plan settings advanced, sleep, sleep after - choose a delay for battery & current alternative.

  You must then set the part of connection of this parameter in both

  2 power options, [on the left side of the window] require a password on wake up

  3 power options, plan {power} active settings change, change of plan avancΘs, [you will have to click on "view the currently hidden settings] {active power plan}, require a password on wake up.

• I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots

  OS - win7 family Basic 64-bit

  anti virus-macfee
   
  Original title: I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots. MacAfee antivirus, 1 GB Radeon graphic

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• I installed Photoshop CS6 extended (student version) on my Mac in May last year. It has worked perfectly until recently when the system tells me that the program is perhaps not able to work with OSX (I have OSX 10.9.5). I have now uninstalled the PS one a

  I installed Photoshop CS6 extended (student version) on my Mac in May last year. It has worked perfectly until recently when the system tells me that the program is perhaps not able to work with OSX (I have OSX 10.9.5). I have now uninstalled the PS application and you want to reload. I have the S/N codes and redemption. How should I proceed?

  Please visit to download applications download Creative Suite 6 .

  Kind regards

  Hervé Khare

• When the system suitcase comes to the ways and paths?

  When the system suitcase comes to the ways and paths?

  Photoshop doesn't have the ability to do.

• across the circle when the mouse is idle?

  When the mouse is idle, dynamically create a circle and a scale. the scale must depend on the duration of inactivity mouse... so here I could not put the circle wide, but all others are made. put the code here. Please check and give me the solution to fix this problem. Thanks fo the help...

  CODE.................

  import flash.display.MovieClip;

  Import fl.transitions.Tween;

  Import fl.motion.Tweenables;

  Import fl.transitions.easing.Strong;

  Import fl.transitions.easing.None;

  import flash.display.Sprite;

  import flash.events.MouseEvent;

  import flash.events. *;

  import flash.utils. *;

  var tweenScaleX: Tween;

  var tweenScaleY: Tween;

  var scalecir;

  var i = 1;

  var for_knw:Boolean = false;

  var inactiveTime:int;

  var t:Timer;

  switcher var: int = 0;

  var posXa:Number = stage.mouseX;

  var posYa:Number = stage.mouseY;

  var posXb:Number = stage.mouseX;

  var posYb:Number = stage.mouseY;

  inactiveTime = 1000;

  t = new Timer (inactiveTime);

  stage.addEventListener (MouseEvent.MOUSE_MOVE, stall);

  t.addEventListener (TimerEvent.TIMER, onTimer);

  t.Start ();

  function startt(e:MouseEvent):void {}

  t.Reset ();

  t.Start ();

  }

  function onTimer(e:TimerEvent):void {}

  trace ("Secnds inactive mice:" + i ++);

  }

  this.addEventListener (Event.ENTER_FRAME, checkMovement);

  function checkMovement(e:Event):void

  {

  If (switcher == 0)

  {

  posXa = stage.mouseX;

  posYa = stage.mouseY;

  Switch = 1;

  }

  on the other

  {

  posXb = stage.mouseX;

  posYb = stage.mouseY;

  Switch = 0;

  }

  var cir:Sprite = new Sprite();

  cir.graphics.beginFill (0x0066CC);

  cir.graphics.drawCircle(mouseX,mouseY,2);

  cir.graphics.endFill ();

  If (posXa == posXb & & posYa == posYb)

  {

  addChild (cir);

  tweenScaleX = new Tween (cir, Tweenables.SCALE_X, None.easeNone, cir.scaleX, i, 1, true);

  tweenScaleY = new Tween (cir, Tweenables.SCALE_Y, None.easeNone, cir.scaleY, i, 1, true);

  }

  on the other

  {

  stage.addEventListener (MouseEvent.MOUSE_MOVE, startDraw);

  function startDraw(e:MouseEvent):void

  {

  i = 1;

  graphics.lineTo (mouseX, mouseY);

  graphics.lineStyle (1, 0 x 000000);

  graphics.moveTo (mouseX, mouseY);

  }

  }

  }

  I don't see the need for the i value, but if you want to keep it, you can and you can use instead the end point for the value of the scale of the tween, as in...

  tweenScaleX = new Tween (cir, "scaleX", None.easeNone, cir.scaleX, i, 1, true);

  To have the circle grow over time, you have to shoot the declaration circle out of the loop so that it is accessible to the Timer event handler function.  You can use the timer event handl. er function to take care of the scaling of the circle and settle the interpolation of...

  import flash.display.MovieClip;
  Import fl.transitions.Tween;
  Import fl.transitions.easing.Strong;
  Import fl.transitions.easing.None;
  import flash.display.Sprite;
  import flash.events.MouseEvent;
  import flash.events. *;
  import flash.utils. *;

  var tweenScaleX: Tween;
  var tweenScaleY: Tween;
  var scalecir;
  var i = 1;
  var for_knw:Boolean = false;
  var inactiveTime:int;
  var t:Timer;

  switcher var: int = 0;
  var posXlast:Number = mouseX;
  var posYlast:Number = mouseY;

  var allowDrawingCircle:Boolean = true;

  inactiveTime = 1000;
  t = new Timer (inactiveTime);
  t.addEventListener (TimerEvent.TIMER, onTimer);
  t.Start ();

  function onTimer(e:TimerEvent):void {}
  i ++ ;
     tweenScaleX = new Tween (cir, "scaleX", None.easeNone, cir.scaleX, cir.scaleX + 1, 1, true);
  tweenScaleY = new Tween (cir, "scaleY", None.easeNone, cir.scaleY, cir.scaleY + 1, 1, true);

  }

  this.addEventListener (Event.ENTER_FRAME, checkMovement);

  var cir:Sprite;

  function checkMovement(e:Event):void
  {
  If (posXlast == mouseX & posYlast == mouseY)
  {
  {if (allowDrawingCircle)}
  allowDrawingCircle = false;
     
      CIR = new Sprite();
  CIR.x = mouseX;
  CIR.y = mouseY;
  cir.graphics.beginFill (0x0066CC);
  cir.graphics.drawCircle (0,0,2);
  cir.graphics.endFill ();
     
  addChild (cir);
  }
  } else {}
  allowDrawingCircle = true;
  }
           
  posXlast = mouseX;
  posYlast = mouseY;

  }

  stage.addEventListener (MouseEvent.MOUSE_MOVE, startDraw);
  function startDraw(e:MouseEvent):void
  {
  t.Reset ();
  t.Start ();
  i = 1;
  graphics.lineTo (mouseX, mouseY);
  graphics.lineStyle (1, 0 x 000000);
  graphics.moveTo (mouseX, mouseY);
  }

• How to change the serial number when the system board is replaced

  How can I change the serial number of the system in the bios of a D530 SSF when replacing the motherboard?

  Hello:

  I suppose that if that's all you can do with this utility, then it of all you can do.

  I do not think I said that the utility likely to modify or add the model number, nor asked the question originally.

  You will need to contact HP technical support and have a technician HP bios with any other information you need to tattoo.

  Paul

• NB250 ask password when the system recovery

  Toshiba NB250
  W7 starter

  When I try to recover the system it ask for password «TOSHIBA» user administrator

  What is the real procedure?

  How do you try to recover the system?
  You use a HARD drive recovery procedure?

  Try this:
  Hold down the "0" key after turning on the unit.
  HARD drive recovery starts immediately and the operating system can be set back to factory settings

• Satellite Z830-10J battery discharge when the system is shut down

  My new Toshiba Satellite Z830 10J ultrabook with Win7 64 bit. all updates, works fine and shows no anomaly, there is however a strange exception.

  When the battery is completely charded and I 'pull the plug', the system runs on the battery for sometimes more than 5 hours, so I guess that the cycle of the battery is ok.

  When the battery is now fully charged again and I SHUT down the system and not using it for a few days.
  Then the battery is completely DISCHARGED to 0%, and the system does not start, until I plug.

  This phenomenon occurs in less than a week. So: loading of the batrery 100%, turn the system off, pull the plug, want to re - use the system after 7 days, yields 0% battery charge.

  Is there a specific reason for this?

  Greetings

  Roland Schweiger

  > It appears that one of the BIOS settings (disabling the sleep_and_charge or disable WOL) solved the problem

  Great! Thanks for the comments!

• E/s digital USB-6008 changes when the system starts

  I was intending to use the USB-6008 housing in a critical application in which the digital I/o lines are used to trigger relays.  The relay should activate when I ask them programmatically.  Otherwise, they must remain open.  The problem is that during a reboot of the operating system, the e/s digital USB-6008 go up and down several times - opening and closing my relay.  It is not acceptable for my application.

  Is it possible to prevent the lines to reach logical high except if ordered to do so?

  There is no way to set the startup on the 6008 States.

  As the system USB boot devices and turns on power to the computer and off the power to the USB ports, on the DIO lines go up and down several times.

  You will need to put a logic of material extra, just after data acquisition to ensure that potentially dangerous output combinations cannot affect the relay and the elements they control.

• Features of Installation of Windows 7 software service stops responding when the system configuration

  I noticed that Windows 7 RTM (all versions, x 86 / x 64) has a bug on its features to Software Installation service which causes updates Windows hang during setup of the system (i.e. Windows is stuck on the message "preparing to configure Windows - do not turn off your computer"). M$ suggests to perform a repair with system restore or re - install the operating system from scratch, but is not an effective solution.

  Given that Microsoft has published 5 updates for setup of functionality of software on Vista, I wonder why they don't release a similar patch for Windows 7?

  I opened a support to report the problem incident, which probably occurs after installationreliability KB974431 update(Windows6 1 - KB974431 - x 64.msu).

  When Windows Update installing KB974431 update , the following error message appear when Windows configures updates after the system restarts and the installation of the update fails with error code ofC004F050 .
  Above the error due to the Windows operating system can not pass genuineWindows validation (WGA) . installation of KB974431 will fail if validation fails, or returns a status not valid or not genuine. Here is the procedure to fix it:

  1. click on Start .
  2. in the run box, type cmd and press ENTER.
  3. you will see the black command prompt window.
  4. enter sfc/scannow
  5. If this disable the grace period, it is reset using this code: slmgr /rearm
  6. restart your computer.
  7. try to update again.

  Hope this solution helps!

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.