Similar Questions

• Omen 5012: omen 5012 update firmware, color of backlight keyboard problems

  When upgrading F.09 to F.23, the ability to control the colors of the keyboard backlight went, as explained by OP.

  When you check the available firmware updates, Support of HP Advisor has shown new firmware and 3 other downloads, as of July 30. Then I pressed, check the updates and all entries have disappeared, now HPSA says there is no update available.

  In any case, where can I download the latest firmware and has this problem fixed the inability to control the colors of the keyboard backlight.

  Omen of control works with 10 Windows with the event system utility that was released yesterday. See the thread below.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-omen-control-software-no-longer-works-after-Windows-10/TD-p/5169933

• L26500 61i: PROBLEM UPDATE FIRMWARE L26500 61i

  I can't update firmware. My latest firmware is 11.0.0.2 and when I try to upgrade to 12.00.00.5 I get this message

  SP - SP_12_00_00.5_mvl40 - x 86 - opt_B.signed.fmw: there are problems with the firmware file and the firmware update process has failed. The file you have selected may not be good, or the problem may be due to a transmission error. Please, start the firmware update process again. If the problem persists, please contact support.

  I tried to download it again, but it's the same thing...

  I have checked the connections on the back of the printer and found a LAN connection, I confused with the 360 LaTeX, sorry my mistake
  Another task to do, run the diagnostic menu of emergency update firmware.
  If issue still continue, run the hard drive recovery in the same menu

• 900 Elitepad F.50 (SP68375) G1 firmware update and defect TPM, Bitlocker problem

  I recently installed the firmware recommended for ElitePad 900 G1 (sp68375.exe) running Windows 8.1 update 1

  System BIOS Update F.50 for HP ElitePad 900 G1 Tablet (c04409743)

  In order to install the update I had to suspend bitlocker drive encryption, which is a mandatory requirement in my workplace.

  After properly installing the update of the firmware and trying to catch the bitlocker encryption, Windows reports the following error:

  "BitLocker Drive Encryption error."

  Wizard initialization has failed.

  The BIOS does not correctly contacted the

  Trusted Platform Module (TPM). Contact the

  the computer manufacturer for BIOS upgrade instructions"

  I tried to re-download and reinstall the firmware update, but ended up with the same error after successfully update a second time.

  Someone else (or HP) applied this update firmware and can fix any counselor or a workaround to get BitLocker up and run again? My ElitePad is now reported as non-compliant system due to the suspension of BitLocker.

  Thank you.

  Please try latest BIOS on HP.com (F.52) for the Elitepad 900.  If it solves your problem, please check the issue as resolved.

• Problem updating Firmware emulex card (FCoE) thought a single Manager command

  vCenter 4.1

  ESX 4.1 update 2
  

  OneCommand Manager 5.2.12.2 - 1 < < install on ESX using esxupdate

  CIM provider < < install on ESX with rpm

  OneCommand Manager for VMware vCenter 1.1.0 < < install on Virtual Center
  
  I want to update Firmware to troubleshoot vMotion between esx host
  

  Firmware OCe10102 and Startup Code
  Notes: You need to update the firmware and boot code on the OCe10102 UCNA when you install the driver.

  http://www.Emulex.com/downloads/Emulex/firmware-and-boot-code/oce10102-UCNA-firmware-and-bootcode/firmware-and-boot-code.html
  

  any idea?

  Error message

  
  

  
  

  
  

  Hello ianeme,

  I was watching the forums and came across your question. Ask yourself if you have solved your problem of port when you use plugin manager of OneCommand to vCenter Server? I have seen that HP has two downloads for the fw updates. For now, the last FW update to CN1000E is 4.0.493.0 March 12, 2012. Call the Emulex support if you experience problems when you try to update the fw with the Emulex OneCommand Manager application or the plug-in. But just make sure you are tested and approved HP FW by downloading the files from their site.

  Thank you

  Alex

  http://www.Emulex.com/the-implementers-lab.html

• Camileo S30 will not fuel issue?

  I hope someone on the forum can offer a solution to a problem I have with my Camileo S30, occasionally it does not start or turn on unless I remove and replace the battery, I tried the factory
  setting by default, but nothing does, and a new battery, it seems that this fault applies to many camcorders s30.
  If it's a Bug in the Firmware? and are updates available, any help would be appreciated
  Thank you
  Jon

  Hello

  I'm having the same problem, S30 worked fine for a week and now refuses to start. Same frustration because it is my camera girls aged 12 years.

  It is obviously a general problem of searching the Web, but no one seems to have given a solution...

• Need a program to retrieve unfinished file MP4 on my Camileo S30

  I have a problem with my Camileo S30.
  I took a 25-minute video my dads 90th anniversary and the file has frozen the camera.
  He stayed until the battery was flat. I could not turn off!
  When I reloaded the camera, it would not read the file.

  According to your forum, others have had the same problem
  . All other short 5-10 minute videos work ok then why don't the camera missed the end of the file in question. This file is valuable to my whole family and is the only video we have of the event.

  I pleaded with Toshiba for a solution, so I can recover the file.
  * PLEASE HELP *! I have

  My family will be forever grateful for your help. Y at - it a software update that will prevent this from happening again? If this is not the case, there should be.

  Brian

  This mp4 usage guide may help you:
  http://www.Digital-Digest.com/articles/MP4_Usage_Guide_page1.html

  Also try a tool called MPEG Steamclip and read this page to get some [HowTo | http://www.videohelp.com/guides?searchtext=mp4+edit&tools=&madeby=&formatco nversionselect = & howtoselect = % 3B & orderby = Date & lista he's = 1 & hits = 25 & archive = 0 & search = search + or + list + Guide s] handle mp4 files:

• Camileo S30 - zoom is activated when slow motion is activated

  Hello

  I bought a Camileo S30 and im facing some problems such as:
  When I activate the idling system, my camera, put all the zoom and then I can take or move the zoom.

  Another problem, it is photos ever door every time
  I take a picture of my photos never come right.

  Hello

  The slow movement seems to be only available in recording mode video and if this mode video resolution is set to 320 x 240.
  It is a QVGA resolution.
  In addition, the stabilization, motion detect, time lapse and slow motion can not be used simultaneously.

• Update firmware on Satellite A200-1gh - noise emissions under Linux

  Hello

  I have a serious problem with the sound on Toshiba laptop. Many people have the same problem I have.
  An example:

  ________________________________________
  Hi there everyone
  straight to the point, I got no sound running ' bt3 beta computer laptop - Toshiba satellite a200 - 14 d, HD audio - Realtek ALC862 @ Intel 82801GBM ICH7-M - audio. I tried to fix it with a blender Kmix or alsa, even downloaded the Realtek driver name and installed, but bt3 built in Realtek driver. Still nothing"
  ________________________________________

  My laptop contains this sound card: 00:1 b. 0 Audio device: Intel Corporation 82801 G (ICH7 Family) High Definition Audio Controller (rev 02) @ Realtek ALC861-VD. There is a problem somewhere in the firmware of this map or the Linux kernel.

  We use Backtrack 3 who is Slax based Linux distro.
  I've been with many professional talking about Linux, Bud, no one is really sure what is the problem. They said several things to try; one of them is updated firmware. I've never done this before, I'm looking for help.

  Number of exact model of my laptop is Toshiba a200-1GH psaece

  Please help if you can

  > There is a problem somewhere in the firmware of this map or the Linux kernel
  What are you talking about boyfriend? This firmware of the sound card that you hear?
  I think you're confused.

  First of all there is NO firmware for the sound card. Second, the sound card is controlled by sound driver.
  Always is it that Toshiba laptops are preinstalled with Windows OS.
  Linux is not supported at this time, and you won't find driver for sound card for Linux.

  If you need a sound driver for this sound chip, you will need to download it from Realtek Web site!

  That s all about your firmware to his mysterious map.

• Satellite A30 303: no update firmware for drive UJ-811 H100

  Hello!

  I have model witch toshiba A30-303 have mast * one optical drive UJ-811 H100, I have this laptop for over 2 years and I have strength to find any update on this drive I n even know if this company exists (matsu * a).

  I've changed this disc about 5 or 6 times with a new period of warranty due to reading problems.

  I'll be happy if someone knows something about the update of this player

  GEIA sou Taso,

  Matsu * one is the same company that PANASONIC which is more known for us. The UJ-811 is a quite old model (3-4 years) and very well known problems.

  You forgot to mention in your post...
  (1) exactly, what is not working on your disk (writing? read?) DVD? CD? Movies?) and also
  (2) why do you think a firmware would solve your problem. (he has none)
  (3) how often and for what purpose do you use your car,.
  (4) and finally to what type of physical environment (home? mobile? dusty?) that you are using your laptop.

  Be aware, that optical readers get very easily breakable, especially when it is used for watching/rip movies on them or access the drive streaming of games. Another possible reason would be a wrong installation / incompatible software on your PC that can cause the drive not to work properly (or even disappear).

  You can try to 'clean up unused software' on your laptop and also to put a soft recovery to check, if your CD drive will be properly again. If the problem will not go away, you need to exchange it for a different brand new maybe even one (it was 5 times that a PANASONIC drive is broken?  ;)). If you are a heavy user of DVD player (movies, tearing, Burning, blah) you should ALSO get yourself a USB external... they hardly ever get broken, are faster and more reliable, and are much less expensive to replace. One of my friends who had already 3 discs replaced in his book could confirm as the best solution.

  Kind regards
  chain

• Satellite Pro A300 PSAG9E - unable to update firmware

  It has come to my attention that my laptop will not install updates of the firmware.
  I tried all updates firmware on the Web from Toshiba site and on-site support for other countries but still no luck.

  My laptop is a series of Satellite Pro A300 PSAG9E and when I try and install a firmware update a box telling me it's not compatible with my system.
  I checked the version proposed by the pdf file and I know that it is the basic version before the update, and I'm sure I have install the correct way of m.
  So I don't know what goes wrong.

  Does anyone else have this problem or knows something that could solve this problem? Because I'm at a total loss.

  Thank you

  Hello

  The European driver Toshiba page provides three firmware updates;

  _UPDATE for drive_ TS-L632
  + Changes have been made in order to correct the following: +.
  + Impossible to burn songs on iTunes to some CD media. iTunes error "the attempt to burn a disc fialied. An unknown error occurred (2131)"is displayed. +

  _UPDATE for drive TS-L632P TO02_
  + This firmware solves some problems in the optical disc drive. +

  _UPDATE for TS-L632H drive TO03_
  + This firmware solves some problems in the optical disc drive. +

  You have a TS-L632P and TS-L632H drive?
  Isn't it? Then you cannot update the firmware.

• Satellite M40-101 cannot update firmware

  I tried to update firmware for my dvd - rw on M40-101 laptop drive, but when I start the program it says only "the target disk is not connected". What to do with it? the problem is perhaps cause firmware for dvd - RW drive Matsu * a UJ-831, but the model is actually UJ - 830B?

  Post edited by: ruselok

  Hello Ruselok

  Where did you find this update of the firmware? This firmware update is given by Toshiba?

• Satellite A45: need to update firmware on DVR K12D drive

  Hello...
  IM new here... Well, I have a toshiba > Satellite A45 Series... which had a DVD Multi Drive (DVR K12D) inside. The problem is that his operation stopped. Sometimes she would write a CD then sometimes it spoils my CD. I used on the media player were Verbatin, Imation, Supermedium, Sony.

  Well the reader works as a very short period and then dies OFF... every time I took it to the repair center...

  The drive has been changed now 4times by toshiba support. I asked for the release of Firmware from 1.05 to 1.15 or higher. They keep answering back telling me to ask pioneer. But it is an OEM obvious by toshiba.

  The player after having been changed stops working without delay of 2 to 3 months max 4 months time and den customer tried upgrading the drive by putting a higher config recorder multi disc double tht is the 8 GB one. The satellite detects that hardware.

  been 2 years now my readers send me problems such as:

  does not read DVD
  doeant read CD RW
  don't write CD/DVDs
  sometimes DVD detects any sometimes they detect its weird.

  The only solution is to update the firmware, but how can I do? I need the update of the firmware. I called toshiba WE also, they talked for two hours and then answer that I have to contact pioneer!

  Please help me!

  Vik!

  Hello

  CD/DVD players support generally not all means.
  As far as I know in the manual you will find a list of the CDs and DVDs is supported and it works properly.

  In addition, it seems that this device was designed for an American market and in this case, you should look at the Toshiba Site us.

  I checked this American site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There, I found several notebooks A45 and the necessary drivers. I also found a driver for DVD rom and ram. It s not a firmware update but maybe it helps.

  However, on Toshiba Europe site, I found several updates firmware for the readers and the different European books but as I said at the beginning you have a US laptop and have to look on the American website. If you don't get an update of the firmaware if you ask the manufacturing of the car.

  In addition, I want to say that you can not be sure that, after updating the firmware of the player will not work correctly. This kind of malfunction looks like a defect of lens calibration and therefore only a replacement disc can solve this problem.
  If the drive has been replaced several times so I guess that the guarantee is valid and you will get a new.

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• C4599 Printer PC unable to find updated Firmware

  Hi all, I'm trying to update the firmware on my PC Windows XP (HP laptop). The software is downlaoded OK but when I run it does not find the printer. The printer is connected to my local network (infrastructure mode) via WiFi and prints OK from various computers laptops (Win XP, Win Vista and Win 7) in the House. It prints via WiFi or via the USB port but it can not be found with or without the USB connected to the PC (laptop) Windows by software update Firmware.

  Help, please!

  Thank you

  gedi42

  You suffer from one of the problems regarding the update of the firmware?

  I've actually found updates of the firmware available for your printer, only critical updates.

  Here is the update that I found:

  Update critical to prevent a State does not respond and prevent the State from error when connecting to a network.

  This is were you referencing?