Can Flash plug-in connects directly (or faster) with RTMP over HTTP?

Similar Questions

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Can you connect directly a Tablet wifi to your computer for the internet

  Can you connect directly a Tablet wifi to your computer for the internet

  Let me answer this way:

  Suppose you have a desktop or workstation that has a wired connection to the internet. Moreover, that this system also has a working wireless card. Another device with a pu wireless device to connect to desktop with a wireless ad-hoc connection. The desktop can be configured for connections to bridge the two and leave the system second to use "Internet connection sharing" to connect to the Internet.

  Start here:

  http://support.Microsoft.com/kb/306126

  Tom Ferguson.

• Can not get Flash Plug to work

  I am a user of Windows Vista and in the past had access to a web site page that allowed me to see a presentation of the stadium and to choose the places available for a given device. But now the site keeps telling me to update my Adobe Flash Plug I did several times. I also deleted Adobe and Flash Player completely and re-installed, but to no avail. I also used the Adobe uninstaller feature which is available but still no joy. Help would be appreciated.

  miconew wrote:

  Web browser = Google Chrome Ver 38.0.2125.111m

  Flash Player Active X version =: not installed

  NPAPI plug version: 15.0.0.189

  PPAPI plug version: not installed

  Very strange!  Google Chrome comes with Flash Player (PPAPI) preinstalled.  Do you have somehow managed to uninstall?

  I suggest that you uninstall, then reinstall the latest version of Google Chrome.

• Trouble with iMac connecting directly to the modem

  I have an AirPort Extreme, provision of a wifi network in my house. It is connected to a modem Concast Cisco DPC3941T model.

  I planned to connect my iMac (retina 5 k, 27 "running 10.11.3) directly to the modem and not use wifi to connect to the Internet.  I plugged a bolt of lightning for the Ethernet card in and ran a cord to the Cisco modem, but the iMac doesn't recognize this connection.

  Network preferences says "Thunderbolt Ethernet has an assigned IP address and won't be able to connect to the Internet."  Sorry, don't know what that means.

  The reason behind the try it is that my wifi signal is de-energized intermittently and I can't understand why. So I thought that if I plugged the iMac directly I could avoid the abandonment wifi issues.

  Thanks in advance for your suggestions.

  You have removed the Airport Extreme?

  If you connect the computer directly into the modem, the ethernet indicator lights on the router. It is essential for the ethernet work.

  Using an ethernet cable, you bought? If it's super long they can give trouble... a short cable should be fine.

  If you are not sure the little light on the AE plug the computer by ethernet in the extreme with a cord short... lights... If so, you can plug the cord of the cisco to another port ethernet on EI and make sure it works too.

  Network preferences says "Thunderbolt Ethernet has an assigned IP address and won't be able to connect to the Internet."  Sorry, don't know what that means.

  Ethernet is not connected or DHCP does not work. If the modem has been bridged it won't work, unless you turn off the modem for about 20 min. Then launch new follow-up to the computer.

• The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

  I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

  So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

  A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

  Thank you.

  It will not work. And where did you read that the keyboard works wired with a Mac?

• Can't no more connection to Messages or FaceTime on MacMini

  I have been using my account Messages on an iPhone, iPad Mini Mac Pro and mid-2011. Recently, I think that after the update to El Capitan, Messages & FaceTime has stopped working on the Mac Mini, but still works very well on both devices.

  There is an old rule here of people with the same problem, largely unresolved: https://discussions.apple.com/thread/5510570

  I tried everything suggested in this thread without result. This same identifier Apple works fine on this computer, in iTunes, App Store, iCloud, it just stopped working in the Messages or FaceTime. I try to open a session the same ID that works successfully on the iPhone and iPad, but on the Mini, he says "could not sign an iMessage. An error occurred during activation. Try again. »

  I'm under 10.11.6.

  I am surprised to see that this has been a problem for so long, judging by this thread how much time is spent... Very frustrating.

  This could be a difficult problem to solve, as there are several possible causes for this. Please test after taking each of the steps that you have not already tried it. Back up all data before making any changes.

  Before proceeding, test on another network, if possible. This could be a Wi - Fi access point public, if your computer is portable, or a cellular network, if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or your ISP, not in your computer.

  Step 1

  Check the status of the service. If the service is stopped, wait until he comes back upward. There may be a power outage, localized, even if the indicator is green.

  Step 2

  In the menu bar, select

   ▹ System Preferences... ▹ Date & time zone ▹

  The nearest town from there where you are should be selected on the map.

  Step 3

  Disconnect you iMessage and FaceTime on all your Apple devices. Sign out and then sign back in. Try to connect again.

  Step 4

  Restart your router and your device at wide band, if they are separated. You may skip this step if you don't control these devices.

  Step 5

  Follow these instructions to view the serial number of the machine. If the number is missing or invalid according to the web form, take the machine to an Apple Store or another service center authorized to correct the problem.

  Step 6

  The measures suggested in this support article. If you do not understand some of the steps or leads them not, ask for advice. Note in particular that the email address associated to your identifier Apple should be checked. If the address is in the field obsolete mac.com, you will have to change.

  Step 7

  In the menu bar, select

   ▹ System Preferences... ▹ Network

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the Proxies tab. If the SOCKS Proxy box is checked, uncheck it. You don't need to change other parameters in the window. Click OK, and then apply. Test.

  The result may be that you can not connect to Internet at all. Cancel the change, if any, or if iMessage still does not work. Remember that you must apply changes made in the preferences window to take effect.

  Step 8

  Select in the menu bar

   ▹ System Preferences... ▹ Flash Player ▹ storage

  and click on

  Block all sites to store information on this computer

  Close the preferences window.

  Step 9

  Make sure that you know the ID and the password you use with iMessage. Launch the Keychain Access application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Use the search box in the toolbar of the Keychain Access window to find and remove all items containing "iMessage" or "com.apple.idms" in the name. Sign out and then sign back in.

  Step 10

  Select connections comments * and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you won't have access to your personal files or settings. Applications will behave as if you use them for the first time. Don't worry about that; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create an account to test and delete it, including his home folder, after testing.

  If iMessage worked in the guest account, stop here and post your results.

  Step 11

  Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is set, or if the boot volume is a Fusion drive or a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including his outputand Wi - Fi on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.

  If iMessage worked in safe mode, but still does not work when you restart in 'normal' mode, stop here and post your results.

  Step 12

  Triple-click anywhere in the line below on this page to select this option:

  /Library/Preferences/com.apple.apsd.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  Step 13

  Reset the NVRAM.

  Step 14

  Reset the controller (SMC) system management.

  Step 15

  Reinstalling OS X.

  Step 16

  If none of the above steps resolve the issue, make an appointment 'Genius' on an Apple Retail Store or contact Apple's Support. When you configure a support call, select "Apple ID" as the product that you need help, not model material. In this way, if you're not under AppleCare, you can talk your way out of being charged for the call.

• Latest flash plugin causing FF to hang at exit 19. Uninstalled the plug in and reinstalled fresh Adboe with the same results.

  Whenever I close Firefox, I have to open the Task Manager and kill the process manually. I uninstalled the flash plug-in and the problem is solved, except that now I can't use YouTube etc. etc. Without the Flash plugin browser normally works with it, not so much.

  I tried the reset nothing helps. I uninstalled and reinstalled Firefox and plug in and that fixed the issue.

• It continues to Flash in the connection tab... it shows briefly then nothing. It will not go or do anything, please help

  I try to open firefox, and briefly, it shows the home page then turns off. the tab flashes just to connect tab for new tab above and more. It takes forever to not even down to the bottom of the help, tools, etc. I 16.0.1 it was working fine 2 days ago... but yesterday it just stopped.
  I was wondering if I can not fix & need to reinstall... all my info would be lost... all my sites & bookmarks... or is there a way to keep?

  i have windows 7 & use microsoft essentials.. did something update & change my settings?
  

  Help, please... I love firefox... I am now on IE9...

  Ok.. I found the way to boot into SafeMode... and it worked... THANK YOU VERY MUCH SO.

• Power adapter can remain plugged in or not?

  Hello!

  I have Toshiba Satellite A10. Can a power adapter stay connected to the power supply and the computer all the time (24/7) or disconnect every night? How, it would be preferable to battery?

  I wish that, because of the good battery works.

  PS Sorry for my English, I'm Russian.

  Hello Francis,.

  said that the adapter should be disconnected during charging the battery in the portable professional past.

  But today, the battery can be plugged into the hole day. The current batteries are fine and the AC adatper and software are also "smart." When the battery is fully charged, the software stops the loading process.

  Rudi Bye

• I have a p6310f and I have my cpu fan connected directly in my msu and fan controller how do I

  can say that the cpu fan has no error and fan service doesn't have a system soon error

  EDTII

  The fans (CPU and case) are attached to the motherboard for this (the sensors) headers. Connect directly to the power supply (not a ' SSM') bypassed motherboard sensor circuit.

• Just got a monitor hpx2301, can I plug my xbox 360 into the HDMI?

  Can I plug my Xbox 360 into the HDMI

  on my new monitor, it's a hp x 2301

  Thank you

  As long as you have an HDMI cable to connect your XBOX 360 console to your 2301 x monitor, I don't see why it wouldn't work.

  Frank

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• I can't connect to wireless internet with windows vista

  I bought a new HP Pavilion dv6 laptop with Windows Vista and I tried to connect to the internet from my laptop via router ADSL2 + wireless D-link but my network is not visible wireless.

  I tried to plug my ether cable and this time my network was visible, but it would not connect.

  I am able to connect from another laptop with windows XP wireless through the same router.

  My HP laptop connects via WiFi in other places, but not at home via D-link router.

  I am not able to connect to internet from my laptop HP since I bought it 9 months ago.

  
  

  What can possibly be the reason? Can you help me connect to the internet?

  Thank you

  It seems that your settings are not correct for the access provider or router (or both).  I suggest that you contact your ISP and have them walk you step by step in the process of installation and configuration and do not let them off the coast of the Nigerian line you have a good connection, as you wish.  They know that the parameters so that we don't have, so they can help you better than we can, and I'm sure they will be happy to do.

  Here is an article (with many additional useful links) on how to set up a home network in Vista:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on how configure and connect to a Vista wireless network: http://www.watchingthenet.com/windows-vista-tip-how-to-setup-and-connect-to-a-wireless-network.html.

  Here is a Microsoft Technet article on how to install and connect to a Vista wireless network:http://technet.microsoft.com/en-us/library/bb878035.aspx.

  Between these three articles and assisancce by your ISP, you should be running without delay.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Color LaserJet CP1525nw: Can't get CP1525nw connected to the network wireless Netgear Nighthawk x 6 R8000

  I have never been able to successfully get the printer installed by wi - fi with any stability, so we always connected via USB and shared. I bought a new router and would like to be able to print to this printer wireless anywhere on my network. I can't out of connected mode and mode wi - fi printer. Your software crashes, crash facilities to half way through. The printer indicates an IP 169.254.xxx.xxx, if the network is aware, but it's I can get. None of the HP tools will run under this operating system, they hang immediately upon launch. It's frustration none! Someone out there was a bit of luck with this printer!

  Dell XPS 8700 16 GB of RAM

  Earn 8.1 (64-bit)

  Comcast TG862G Gateway (POS)

  Router wireless Netgear Nighthawk x 6 R8000

  HP LaserJet CP1525nw color printer range

  Hi @jrmunn ,

  I want to help you get the printer works on the wireless network.

  There are a few different ways to install the printer on the wireless network.

  • Thanks to the support WPS.
  • Through the installation, by connecting the USB port, it will configure the wireless.
  • Once the USB installation is done. You can configure the wireless via an Ethernet connection.

  Cycle power to the router.

  First, we must restore the defaults on the printer.

  Press the OK button on the printer, go to the service, and then select restore default settings.

  Print a printer configuration page to make sure that the IP address and SSID are erased.

  Print a Configuration report.

  Uninstall the printer software.

  WPS configuration method:

  To connect your printer to your wireless router wireless using WPS:
  (your router must support WPS)

  Start the mode of the WPS button on your printer.
  Within 2 minutes, press the WPS button on your router.

  Then run a printer from devices and printers Add Wizard.

  The USB method:

  Perform a clean boot on the computer and disable the Antivirus software and any analysis in real-time in the Antivirus software also. How to perform a clean boot in Windows.

  Then run the installation immediately after connecting the USB cable, follow the steps described in this document to update the drivers so that's not new error. A fatal error during Installation of the software. Then the installation should continue. (you can use this procedure for any type of installation)

  If you are still having problems and you have an Ethernet cable, we can install the printer as a USB connection again and then configure the printer via wireless Ethernet.

  Method of Ethernet:

  Restore the default settings of the printer.

  Connect the printer to the router with an Ethernet cable.
  Wait about 1 minute and the printer must have a valid IP address.
  Print the configuration page to get the IP address of the printer.
  Type the IP address in the address bar of Internet Explorer which should open the printer's built-in web services page.
  Installing wireless over here now.
  Click the networking, wireless on the left, fill in information about the network and apply the settings.
  After the confirmation, then disconnect the Ethernet cable.
  Now you should have a flashing light on the printer in 1 minute wireless about.

  Print a printer configuration page, to get the new IPv4 address.

  Then create a new port with the new IPv4 address.

  In the devices window and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.