Power adapter can remain plugged in or not?

Similar Questions

• Power adapter can be used for a Satellite Pro M70

  power adapter can be used for a laptop Toshiba DC?

  Details:
  19V, 3, 42

  Thank you
  Arun

  Laptop Toshiba computers use a 19 V or 15 V adapter.
  You must first check the specifications of your laptop before connecting an AC adapter.
  But I would always use AC adapter provided with the laptop or an original part recommended by Toshiba

• 5 watts power adapter can operate for iPad 4th generation

  O Hai der guys please give me clues

  Version 1

  can someone give me clues if the 5w power adapter works with iPad Air or iPad 4?

  Post edited by: Horriblestar5 :)

  It may work but it will load very slowly. IPad 4 provided with a 12-Watt charger.

• Satellite P100-216 - power adapter continues to whistle and does not load

  Recently the adapter (black box on the AC power cord) on my satellite P100 began to whistle and does not charge the laptop, the machine worked that for about an hour and a half, then don't would not have thought that it was getting hot,

  any thoughts?

  Hello

  For me, it looks like a malfunction of AC adapter.
  I think that the cable must be broken, due to the fact that the adapter keeps whistling.

  I can give you only one advice; the adapter needs to be replaced!
  In this case, you should contact the ASP in your country and should ask for help.

  I m guys has can help you.

  Best regards

• NVIDIA Quadro: I plug 6-pin power adapter or connector 8 pin?

  I am trying to install my graphics card Nvidia Quadro 6000 on a HP Z820 with a PSU 1125W

  The Quadro card: 1x8pin auxiliary power connector and power connector auxiliary 1x6pin.

  My questions are

  1. in the connection of my power adapter, do I plug the unit into the 8 pin or 6 PIN auxiliary connector?

  2. where can I connect the other end of the power adapter?

  3. the power adapter must be a HP one or can I use any brand.

  4, if it's HP, what is the part number

  I would appreciate help on this.

  Vinny

  Edit: Here is this link related to this issue.  It goes also to other topics with excellent similar information:

  http://www.TomsHardware.com/reviews/power-supply-specifications-ATX-reference, 3061 - 12.html

  First, it is important to know that there is another interface "6 to 8 pins" which is a feature of power-for - motherboard power ... you don't want that, sure, and connectors plastic is having different shapes.  You can see that he has 4 yellow wires (usually the supply wires) and would not have the sequence of correct wiring of a PCIe 6 to 8 pins supplementary power converter:

  

  I don't know the show, too, is not what you want.  This looks like an 8 pin to two adapter 6 pins.  You want a 6-pin to 8 pin adapter.  Is attached another picture of the nVidia type tells you to do.  If you look at the hyperlink at the top of this post you will find the wiring of 6 pins on 8 wire and for your project, you will probably want to follow the advice of nVidia for best results.  There is power to the ground and 'sense' son to all be correctly connected to the adapter.

  There is also some PCIe additional adapters that allow you to convert several sheets supply 4 son "molex" grouping in a single 6-pin PCIe or connector 8.  It is best to not do this if you have a power with official ones built in.  Your the fact, and to check the manual, it looks like your top rated power supply has 3 of these auxiliary PCIe power cords (G1, G2 and G3 will be printed on the side of the end of your 3 card).  On the other hand, offer reduced rated power of the Z820 has only 2 additional PCIe (auxiliary) cords supplied by it.

  I don't know if you are forced to use a good 6-8 converter or could if away with plug 6 pin right in the correct position on the plug 8 pins of your videocard directly, according to article of the hyperlink.  I, personally, would get an adapter.

  EDIT: Here is a picture of two ends of what is supposed to be a PCIe 6-pin supplementary power adapter PCIe 8 pins.  The first and third power pins 6 pins are officially DC 12v (some references have each of the first 3 pins being 12vDC) and subsequently, the rest are supposed to be a 'sense' or earthed.  When I look at the plug 8-pole end wiring I do not see a ground wire or ground jumper coming to pin 8.  I would not recommend it, unless I'm wrong about his son:

  

• Cinema poster 30 '' Dead - could this be the power adapter?

  Monitor: Cinema Display 30 ''

  Computer: Connected to a MacBook Pro mid 2012 of the retina with a 2.6 GHz Intel Core i7, 16 GB of RAM.

  Graphics card: NVIDIA GeForce GT 650 M 1024Mo

  I got the screen of cinema since 2007. Used with a tower for the first five years, replaced the tower with a MacBook Pro in 2012. The CD went with the laptop using a bolt of lightning > DVI adapter for about 3.5 years, worked ok. Finally, the Cinema Display monitor everything went black. The LED in the corner is always on when powered. I can still use the power on the CD button to turn the monitor on/off, standby system etc. the MBP still sees the CD in monitors when the adapter is plugged. The CD can still push USB devices. But there is no picture, no matter what I do.

  Finally carried the old tower outside and connected to it, just to see if it was something with the MBP the CD. Same results, no image.

  I noticed that the power adapter brick remains cold. If it's just that bad, and I could replace it for a relatively low cost? I see the price of $150/200 on Amazon. Don't want to waste his time with that much more, it's a 9 year old monitor. But I really loved and I want to see if I can get pulled upward again.

  Thank you.

  Looks like either the back lit display is on the way out (you can tell if the monitor is nothing display by shine a very bright light until the front screen and see if you notice any displayed video), or the display is not simply detect the output signal of your GeForce card. I have a NVidia GTX 770 and one of my 3 cinema Display is sometimes the same thing. I end up having to unplug the screen for a few seconds, use WIndows to detect the display, plug the monitor back in and detect the display again to get any video to show on screen. It is intermittent but sometimes quite stubborn. Good luck! If you have two monitors, you can use work to see whether or not your cinema is even detected. If it is, but the screen is always black, it is likely, that you will need the spare parts for backlight.

• Question of ThinkPad T450s Power adapt

  Hi guys, this is my first post

  I want to buy the Thinkpad T450s soon (US version) for my personal use. My only concern about this is that the power adapter can operate with the South American power (220V, 60 Hz), because the United States 110V operation as far as I know.

  Only the product specification is as follows: country Pack 45W AC adapter / CC of the United States (2 pins).

  PS: I sent this question a week ago to Lenovo support and they did not respond, so I take this way.

  Thanks in advance.

  Power adapter 110-240V, then it should work, I use mine in Europe, you just use the adapter and the end to match your outlet in the country.

• Hello, I receive a message telling me that my AC power adapter type cannot be accepted.

  A few days ago, I started having a power warning message when I turn on my laptop. It is said that the AC power adapter type cannot be determined. Beacause it my battery will not charge. But it's the power adapter that came with it and I have used for so long that I got the machine. Do not know what is happening.

  I guess that the laptop works on AC power only but always?

  If you remove the battery from the laptop work?   If yes then I suspect the battery does not have rather than the power adapter.
  If it will not work without the battery then I would suspect that the adapter is faulty/defective.
  Don't let not the battery-even if it is the problem.

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Sony Vaio Pro stops randomly when power adapter is not plugged in

  Hello. I have a Vaio Pro and whenever I don't have a power adapter is plugged in, it stops randomly at different time intervals. Before going off, I'd like to see sometimes the screen flashes a few times, indicating that it goes off.

  I tried the battery on the bottom reset button, but that didn't seem to work. I tried a full system restore and it does not solve my problem either. My Vaio Care shows that my battery is in excellent condition.

  Model: SVP132190X

  Service etiquette: C60C8SD8

  Hi NamN,

  Since you already reset the laptop but the problem persists, it is already an indication of a hardware problem. Please check you the bec Inbox later I'll send you a private message on what to do next.

  Thank you

  Jen

  If my post answered your question, please mark it as "accept as a Solution.

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• Satellite Pro A100 does not connect to the internet if the power adapter is plugged

  Hello
  I have a Satellite Pro A100
  The machine will connect to internet on battery OK. However, if the power supply is connected it does not connect. Any ideas?
  See you soon
  Jim

  Hello

  How do you connect to the internet? With the WLan or cable LAN?
  It s very unusual as the intermits connection when the power adapter is connected.

  This question appears because you buy the laptop?

• My computer keep beep, sayplug in battery adapt, it is plugged. What can I do?

  I can't stop my computer from a sound signal. He says to plug the battery, but it is connected to the computer. Its ruin my computer each time that it beep. WHA I can do? My battery does not charge.

  Hi AW-7,

  Something similar just happened to me.  The first time they fixed it, they have replaced the adapter and the problem is solved.  5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty).  Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

  How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information.  He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged.  They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not the adapter to recognize the AC).

  The beep is caused by power and its configured settings to warn you of a low and critical battery condition.  In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time).  If you remove the batttery entirely, the laptop will power?  If this isn't the case, it is certainly at least the adapter or the motherboard.  Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that).  If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

  I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this situation, you can turn off to avoid the beep (even though I'm at a loss for which is why "it messes up your computer" when it does like all he must do is beep). In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery.  It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case.  If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining.  You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang.  Then, you just need to wait until it is repaired and the appropriate parts are replaced.

  Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair.  They can find the adapter is OK and it is just the battery (or vice-versa or two or more).  But that's essentially where you need start.

  I hope this helps.

  Good luck!

• Notebook15-r110na Energy Saver: my laptop screen has suddenly started to go black when I need to plug the power adapter

  Laptop screen has just started to go black when I need to plug the power adapter to recharge, if I get screen back to normal.  I have not downloaded anything new recently.  I have download the free 10 Windows but that was months ago.  Any help would be appreciated, but please not too technical as I'm not an expert on computers.

  Maybe the powerplan battery is changed or not properly configured. You can see the current powerplan thanks the battery status bar icon.
  Please check if the powerplan options are correct.
  More specific:
  Brightness updates when it is plugged into the charger OK?
  
  Also: If the screen goes black, can still use you the shortcut keyboard keys to adjust the brightness?

• HP Pavilion 6500 goes out when the power adapter plugged

  My Pavilion 6500 (specifically dv6623cl) turns off when I plug in the power adapter. If I plug it in, then turn on the laptop, it automaticly turns off before loading windows. If the laptop is already started, and I can plug the power adapter, it immediately turns off. I can charge the battery without any problem, also while the laptop is turned off, but as soon as I turn it on with the adapter plugged it stops, I checked the battery through HP battery check and he said its good, he is holder of a charge very well and everything, the only change made to the laptop hardware wise was an upgrade memory I had no such problems until the upgrade of memory, but I do not see how it would affect the power on the aspect, in order to make a system restore, if ever, I need, the poweradapter must be plugged and theres other system functions that require the adapter complete, it is a question that must be corrected

  any ideads what the problem would be?

  any help is much appreciate

  Thank you, rayandmaura

  Talk to a jury of uselles / forum, do those who seek info on how to reset / bypass the bios password on their (or anyone elses) computer or something as it gets 20 pages of answers, but asking a power / card issue and your luck if you get a response at all,

  I'll just give up to deal with this useless community and just buy 3 extra batteries and remind all of the accused