Can I load an even bigger then the screen and pan through it?

Similar Questions

• MS Server 2008 R2 on Optiplex 7040 (USB 3.0 ONLY) can make it work, even with all the dism and patch stuff...

  Trying to install Win Server 2008 R2 on an Optiplex witch is so all USB 3.0 by using the legacy startup it will launch the installer and does NOT freeze to the main screen.  But when it comes to screen readers it says it needs a driver, but nothing does not recognize because he needs a driver to recognize the HD and needs a driver to recognize that anything that is connected to the USB 3.0 ports.

  I spent 2 solid days watching and trying different things, including the patcher software dell (who uses powershell).  It works very well.  Broadcasts usb 3.0 drivers in the build of the server, but when I boot it ti freezes at the home page because he removed the pilots using the mouse and keyboard.

  Is there anything else I can try to get this to work?  I use the wrong driver?  I tried the drivers that came with the driver update utility.  I tried the drivers from the website of intel.  Cause the main screen to be locked up with no mouse/keyboard.

  I tried inserting manual usb 3.0 (same result).

  Another way I can get it work?

  I can use 2012 R2 server (who has 3.0 drivers and hard disk drivers and see the HARD disc immediately, but I prefer to use the Server 2008)

  Thank you

  I've found a workaround. (mine)...

  If I install the 2012R2 server, it gives me a platform of USB 3.0.  from 2012, I installed 2008R2, and it worked.

  I had to use 2012 once more in repair/back window because I forgot to shoot all the drivers in 2008.

  I did once I was able to delete windows.old and now I have a fully functional 2008R2 on an Optiplex 7040.

  Of course, has been easier than all this stuff of dism.

• I had the virus 'file system' I ran most of MS who removed it... then the screen turned gray and all the icons and files have disappeared... I can't use restore even in safe mode

  I had the virus 'file system' and ran the Microsoft Essentials who kidnapped... Then the screen turned grat and all my tyop desktop icons disappeared and my files... I tried to use the restore but it wouldn't return back or in SafeMode... also, I get a notice that the Task Manager is disabled? How can I turn back?

  Hi David McGeady.

  ·         You are able to open in safe mode Task Manager?

  Follow these methods.

  Method 1: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2: It seems that the virus is still there. Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 3: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

  original title: HELP ME PLEASE!

  (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

  Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

  Take a look at this:

  http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html

  Hope this helps

  Post back if necessary

  __________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 HP is responsible and can run for 2-3 minutes then the computer crashes and returns to the startup program

  After opening windows computer HP 7 is loaded and can run for 2-3 minutes then the computer hangs and goes to the startup program. However, in safe mode, it remains open without any problems. Recently, the only problem I've had is that the MSN server is not running and has been replaced by BABYLON, who refuses to uninstall itself. I system restored to all the possible dates and problem remains. Can anyone help please

  Scan with these two free tools

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free/

  What anti virus or third-party maintenance utilities have installed?

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I connect my laptop L300D to my LCD tv using VGA to VGA it works fine for a few minutes then the screens n that the laptop and TV started blinking on and outside. Can someone advise please.

  When I connect my Toshiba L300D laptop to my Samsung 40 inch lcd tv using vga to vga connection it works fine for a few minutes. Then the screens on the laptop and the TV start to turn on and turn off, also jumps around cursor. Can someone tell me what is the problem and how to correct.

  Hello

  Try changing the VGA cables and check if it helps.

  If the problem persists, then I suggest you to update the firmware.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Portege 7010CT shows Toshiba logo then the screen goes black

  Help! When I turn on the Toshiba logo comes up then the screen goes black and I find myself with a cursor blinking in the upper left corner. Nothing seems to work, keyboard seems locked even though CTRL, ALT & DEL it restarts. Was working perfectly one day, so that the next. Any ideas?

  Hello

  You can start the machine in safe mode? Which operating system you are using? Are you using it for a while or is this first boot after installation.

  Please write a little more. If you give more info and detailed description, it is easier to understand what may be the problem.

• An e-mail message is constantly on the screen and I can not remove or change.

  original title: E-mail

  an e-mail message is always on the screen and I can not remove or change

  Hello

  1. What mail client do you use?

  2. what happens when you try to delete the e-mail?

  3. you receive an error message when you try to delete the e-mail?

  4. where did you receive this email?

  You can try the following and see if it helps.

  Method 1

  You can try to delete the e-mail in a clean boot state, and check if the problem still persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfigand click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Check whether the problem is resolved.

  Method 2

  I suggest that you run an anti-virus from the link below.

  Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

  Hope this information helps.

• My HP Pavilion laptop g6 hangs on the screen then the screen goes black!

  Hi, I have a laptop Hp pavilion g6 running on windows 7 that I bought for my high school diploma. Of course she had only one year warranty. At first, all was well, then he would start gel and goes black. I restored to factory settings, and everything was fine until Tuesday morning. Tuesday morning I woke up and I went to turn on my laptop after hibernating all night, as I usually do. Only instead of commissioning, he went to the logon screen and after clicking on enter my password it froze. He stayed there for a good 2 hours and then the screen went black and the small arrow white that presented themselves. After that, nothing so I turn it off and back on it. It does the same thing. Last night, after trying for several hours, I restored to factory again. This morning it worked for a few hours, then the office frozen and then the screen went black and is insensitive. Currently, it is still insensitive.

  Update: it works fine in Safe Mode.

  Hello

  303 error code is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  This also corresponds to the start-up question and would explain why you can run safe mode because the disk is under less load (that is, much less read/write requests).

  I gathered from your original post that the laptop is no longer under warranty - you can check the status of your warranty here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook series g6 Nr - see here for an explanation.

  Kind regards

  DP - K

• Hooked up to my new Dell pc and using my 24 "ASUS monitor, the screen is bigger than the screen.

  Original title: control adjustment

  I just plugged my new Dell pc.  I use my 24 "ASUS monitor.  The screen is bigger than the screen, i.e. the edges of the screen are cut.  I swear... I screwed up along with all the options and I can't seem to turn up!  I can't even get the buttons on the control panel of monitor pass (just straight up & down!)  Anyone?  Thank you, Trish

  Hi Trish,

  What is the exact model of the Dell PC and Asus monitor number?

  You can try the following steps and check if it helps:

  Method 1:

  We can refer to the website of the manufacturer of device computer\ and try to install the latest version of the drivers for the graphics card and the monitor. Check if it helps.

  Asus support

  Dell support

  For more information, see the article:

  Update drivers: recommended links

  Method 2:

  Check if the screen resolution is configured properly.

  See the article and check if that helps:

  Change your screen resolution

  Get the best display on your monitor

• iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

  iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

  James,

  Double-tap the screen with three fingers and then go to settings > general > accessibility >... put the Zoom wide.

  

• When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  HELP me get my E mail.

  When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  http://INFOTEP.bee.pl/info.php?avted=;     I'm not that day on computers, and many of their functions and a few times I get a little lost in there so if anyone can help me I really appreciate it.    Thank you!!!

  Hello

  1. what operating system do you use?

  2. What mail client do you use?

  3. you have made any changes to your

  4. what site you're talking about?

  5. How do you access the webpage?

  6. you use Internet explorer or another browser to access the site?

  The link give http://infotep.bee.pl/info.php?avted takes me to a blank Web page

  Are you referring to http://www.bee.pl/index

  Refer to the following, who says that the sites host malware

  http://www.Google.com/SafeBrowsing/diagnostic?site=monidopo.bee.pl/

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Restart computer, windows xp screen came then the screen turned white

  Restart computer, windows xp screen came then the screen turned white

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error at startup of the computer?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.