Hooked up to my new Dell pc and using my 24 "ASUS monitor, the screen is bigger than the screen.
Original title: control adjustment
I just plugged my new Dell pc. I use my 24 "ASUS monitor. The screen is bigger than the screen, i.e. the edges of the screen are cut. I swear... I screwed up along with all the options and I can't seem to turn up! I can't even get the buttons on the control panel of monitor pass (just straight up & down!) Anyone? Thank you, Trish
Hi Trish,
What is the exact model of the Dell PC and Asus monitor number?
You can try the following steps and check if it helps:
Method 1:
We can refer to the website of the manufacturer of device computer\ and try to install the latest version of the drivers for the graphics card and the monitor. Check if it helps.
For more information, see the article:
Update drivers: recommended links
Method 2:
Check if the screen resolution is configured properly.
See the article and check if that helps:
Get the best display on your monitor
Tags: Windows
Similar Questions
-
Bought a new dell battery and still my laptop battery does not charge.
Hello.
I am using a Dell inspiron 1545 for about 3 years now and exactly after 2 years of my purchase, the battery has failed and it began to show me to replace the battery and always informed to contact me dell for a new battery.
I took this to a lot of trouble, so I simply ignored the message and kept using my battery with my wired adapter. After 4-5 months of such uses, my battery has completely failed and does not give me even even a minute of backup, when I remove the power outlet. Then I realized the importance of a new battery and then bought a new battery from Dell.
Its the same battery with the same features and also the same type family. After that I removed my faulty battery, I replaced my purchased new Dell battery and realized that my battery works fine. his load well, but at one point, it says "plugged in, but do not load" which is rare for a new battery, that is purchased new.
This is what it looks like now once I removed the plug adapter and when I depend on the backup battery. It provides a backup, but I see a Mark exclamatory yellow next to her. Which I think should not be present. He also says "Low battery" when there are already some 99% battery left!
I also followed a few steps online
(1) update the BIOS for the last 2) followed by a few other steps such as uninstall the ACI battery in Device Manager and etc...
I'd like to get this problem is solved. I use an adapter family PA-12, which is also replaced. So any help on resolving the issue would be appreciated.
Thank you!
Hey maxim. I have actually FIXED this month back, problem. and I want exactly help on it so that you can fix it yourself too...
the problem that is the creation of your battery to display an exclamatory mark is your power settings.
then follow these steps to get rid of this sign and a battery to work perfectly.
1) click the icon of your battery (left click), you should see an option called "Power Options more' at the bottom of the pop-up window.
Click on 'more power Options.
(2) now, you will be taken to your control panel where you can see all of your power plans and under each plan, you will see an option called "Change plan settings"
3) click on "Change plan settings" for your active power plan. Now you will be redirected to another window of Control Panel, where you can see two types of power options to get adjusted. in other words, when you battery is connected and when your battery is disconnected.
(4) do not touch these options, simply click on 'Change power avancΘs' at the bottom left of this window. THIS IS THE AREA WHERE WE HAVE TO FIX!
(5) after that you click "Change advanced power settings", you will see a POWER options window, go down and then you can see what is called "Stack" with a sign to the left. until it clicks.
(6) now, you just change the levels for the following values
--> Critical battery level (you can change it to 10%)
---> Low battery (you can change it at 20%)
Now once who did, YOU will BE No. LONGER SEE THE EXCLAMATIVE MARK on YOUR STACK!
So I hope it works!
Answer me when you've managed to fix.
-
Question
I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?To open the window to customize the toolbar, do one of the following:
- Firefox button > Options > toolbars
- Press ALT or F10 to temporarily show the Menu bar and choose from there (view > toolbars > customize)
- Hold DOWN the ALT key while pressing the VTC keyboard letters
See-> https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36
Regarding the new button tab, you see the end a '+' after the last tab or the right of the tab bar? This is the icon of the new tab.
- CTRL + T will open a new tab
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
I have been designing a new Web site and when I publish on BusinessCatalyst the index page shows a sign 'coming soon '? This has never happened before and I don't know how to solve this problem?
I have published on an existing site, but also a new site, but I get the same message?
Hello
Open the page that wants to set as your home page,
Click on more action-> set as start page
Now visit the site again, it should be good.
Let me know if you have any question.
-
I have a Dell XPS-8700 running Windows 7. I bought the Dell Backup and Recovery Premium Edition.
I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive. However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.
How can I create a backup of the system? Why I get this error?
Thanks for all the info. My situation sounds very similar to yours.
I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.
V1.7.1.2 downloaded and executed new facility.
When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.
As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.
However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...
In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.
-
Can I install a new HARD drive and use an old backup
Just, I got my new Dell's HARD drive and need to install it in my Dim 9200. Can I use the old hard drive as a backup drive or secondary without deleting anything or reformatting? I have too many things on the old drive and am not crazy about cloning, I prefer to do a clean install of XP and be able to do things more when I feel the need. Is this possible or am I dreaming.
Has never done this before so I need help. Thank you.
Dimension 9200 E6600 2.4 GHz 4 GB DDR2 sdram @ 533 MHZ 4x1Go
250 GB SATA II Samsung spinpoint drive HARD 8 MB cache 7200 RPM
Win XP Pro 32 bit OEM Delljgarcia
After installing the new drive hard SATA and windows installation, etc. and when it works to your satisfaction, put the 'old' drive as the secondary, transfer all the files and folders you need in the new C: / volume, using the option "send to." Providing the old hard drive has no problems, then the format and partition the drive for additional storage.
Note. Only files and folders can be transferred, all programs and applications must be reinstalled from their records, or downloaded from the site of the publishers.
Bev.
-
I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:Windows cannot start because missing or corrupt the system 32\drivers\pci.sysThen he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.Select 'R' in the first screen to start repair.one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank youalso, I can still use the old drive hard when it is installed on my laptop!HP pavilion dv5220us running windows xpI had advanced care system that had a top registry Fixer and I got ccleaner as well on the computerinternet security Norton 2011
Hello panjok2,
Sometimes recovery CD are dependent on the architecture of a hard drive. If it is different from the original disc, then we have problems.
In this case, the best thing you could do is contact HP and see if this is the case. If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.
Let us know if you have any questions.
Best regards
Matthew_Ha
-
How to set up and use two video cards at the same time.
I have HP Pavilion a6150d desktop under Windows XP SP3 PC. My goal is to be able to use the integrated video card and GeForce 220 video card I just buy at the same time.
The integrated video card and GeForce video card (connected to the PCI-E) are installed and usable, but the problem is that I think that my computer cannot detect a video at a time card, so I can't use 2 monitors at the same time. The video only card detects my computer is what I chose as a primer in the BIOS. When you go to the Device Manager display adaptors I can only find an available video card and that's regardless of Setup as primary in the BIOS.
My GeForce 220 have VGA, DVI and HDMI display connectors, but I don't have that VGA cables. So my only option at the moment is to use my video card GeForce with band single VGA connector and integrated everyone to use my two monitors.
I hope someone can help me without spending more money...
"You're not going to be able to use the graphics card integrated Intel and PCIe x 16 graphics card at the same time."
Thanks Frank, this already answered my question, you help me already by saving my time searching for the fix (since there is NO solution), although it won't save my money I like always your quick response and your support. My monitor is HPw1907 with a DVI connector, so I'll just buy a DVI cable. My other monitor LCD SHARP that have a HDMI and VGA connector so I'll just use the VGA cable in this one.
So I guess that my simple goal is not achievable using HP Pavilion a6150d. I love HP more than Dell, but it's doable in Dell, so I hope that HP will have way on how to make this thing work in the future.
-
Tecra A2 - new drive HARD and have no idea of installing the drivers of Windows XP Home edition
Hi all, have not been here in a while...
Where should I start... Have Tecra A2 and the HARD drive died on this issue... was not able to recover whatever it's him so bought a new HARD drive.
Rather than taking it to a repair shop, I would like to re - install Windows XP myself, save money and have a clean install.
I know that I have to download the drivers from downloads for Tecra, but haven't a clue as to who and the most appropriate.
Could someone be so kind and point me in the right direction to get my operating system again?Thank you.
I agree with you. Do clean install of Windows XP Home edition and install all the drivers, Toshiba tools and utilities following this order of installations:
Windows XP SP2
Chipsets Intel (r) software installation utility
Intel (r) 82852/82855 GM/GME Graphics Controller V6.14.10.3722
TOSHIBA common modules
TOSHIBA Hotkey Utility for display devices
SigmaTel Audio WDM Driver
ALPS Pointing-device Driver
TOSHIBA-button On / Off Utility
Launch and TOSHIBA Touch
TOSHIBA Software Modem SM2138ALD04
LAN driver
Atheros wireless network adapter
TOSHIBA Power Saver
TOSHIBA utilities
TOSHIBA console
TOSHIBA controls
TOSHIBA ConfigFree
TOSHIBA PC Diagnostic Tool
Driver DVD-RAM
CD/DVD Drive Acoustic Silencer
View of TOSHIBA for Ext.Monitor serviceI hope that everything will be OK and you will be able to use Windows XP Home on your Tecra again.
If you have any other questions please let us know.Good luck!
-
How to install a new hard drive and create recovery disks before installing the new drive?
HP Pavilion Dv5 - 2077 cl/entertainment laptop
Product #: WQ799UA #ABA
Windows 7 64 bitHello-
So for a while now, I get a blue screen randomly, popping up all the time and some time, who is going to "clear my physical memory" or something and then restart after like 30 seconds. I posted in the forums, once it all started and support told me to run tests and finally told me that my hard drive has been the reason for these constant errors. Then I backed up everything, in anticipation of a real accident.
I'm about to order a new hard drive from Newegg.com, and I would like to know if it is difficult to replace a hard drive in a laptop, or if I should have Geek Squad do it for $50. In addition, I don't think I have the disk for the operating system that came with my computer, how do I order that HP and how much is it?
And, last but not least, is there a message or a video with instructions on how to install a hard drive and operating system?
Here is the hard drive Im currently looking, if could let me also know if this would be my laptop and if it's a good idea that would be great:
Thank you very much.
Hello
Yes, that's exactly what you do
Kind regards
DP - K
-
Hello!
I resized C: and added another F: partition to back up my documents, pictures, etc. If I run HP_recovery, will she also shaped the new partition F:?
I don't want THAT to happen...
Babby, I don't think that the restore CD or partition will allow for the collection of partitions. They will create a single partition only.
-
I bought a new laptop and not a don't watch to see that it has not built in disk drive to install my software for LR3. Is there an online version of LR3 online that I can download and activate with my product code?
Goto keeping updated in Lightroom
Download v3.6 using your registration number.
-
How can I check which version of Thunderbird I have? and is it safe?
to balance the ledger, perhaps a glance this Thunderbird award received the same month. http://www.InfoWorld.com/article/2982630/open-source-tools/Bossie-Awards-2015-the-best-open-source-desktop-and-mobile-software.html#slide4
Thunderbird has many problems, but lack of a development team of dedicated volunteerism is not one of them. There are not enough of them, but security is not compromised.
-
Can someone help me?
The cloud GENERAL license allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac has no importance... 2 on the same operating system or 1 on each
-Two activations may NOT be used at the same time (noted in the link above of the license)
Since you seem to have a special version through your school, I THINK that you need to disable it on old before installing the new
Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help
-also read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html
-or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
New account even computer https://forums.adobe.com/thread/1465499
-
But it does'nt. All I get is a blue screen with a white cross as the flag of Scotland. But when I click on open, the photo opens in Photoshop. Can someone tell me what could be wrong?
Update your graphics drivers from the manufacturer's Web site usually solves the problem. If this is not the case, go to the preferences of the cab and disable the GPU acceleration.
Maybe you are looking for
-
Sound on videos streaming is choppy / sounds under water?
On youtube and hulu, when I try to play any video, it sounds all jerky and scuba/echoy. Computer restarted twice, without change. I went to the page of the firefox plugin and some were obsolete, they are now all updated and the problem persists. Cach
-
I need to remove the photos and when I right click on the photo and does not remove on my imac
I have a new iMac that I'm trying to learn to use. I would like to delete a lot of pictures. When I right click on the image of the Word remove does not come to the top. nothing happens. There is also no trash can symbol. How to delete pictures?
-
my taskbar has moved to the top left corner how to bring back to the original position, which means at the bottom of the screen. I am using microsoft windows xp
-
DeskJet 3051 a direct print from device compatible pictbridge.
The specifications for the printer online all-in-one deskjet 3051 has said that direct printing is supported for pictbridge compatible devices, which is the reason why I bought it. I tried to print directly from my Canon camera, which is also pictbr
-
I'm trying to load windows xp. I have xp professional and it is damaged without repair possible. I tried to defrag it but no use. I want to load XP Home Edition, but it does not fill or format my hard drive before it stops. My question is: How do I f