Can I remove a program which has been updated
original title: updates of programs.
After that I have download an update of a program and install it. Can I delete it?
Can you be more specific...?
Did you download and save a file, then double-click it and run it to install? If Yes, chances are 99% + you can delete the file downloaded since it has already installed the things needed in the places needed.
Tags: Windows
Similar Questions
-
How can I remove a program which will not move to trash?
How can I remove a program which will not move to trash?
What program? If she has an uninstall program, which allows to remove it.
-
I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?
You have a corrupted user agent which identifies you like Firefox/3.0.11
- Mozilla/5.0 (Windows; U; Windows NT 6.1; UK; RV:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 WebMoney Advisor
See:
-
I've been downloadingding a site and it triggered an alert of the virus. I tried to remove all the pieces of the program but message states that I do etque administrative powers to do this, I was not asked for it before installation.
See if this helps:-
If she please vote as helpful.
Thank you.
-
How to remove books that have been transferred to a zune player. My player has a menu audiobook download to it, but when I go to the device to remove items from the menu audiobook does not appear?
Zune discussion group
They no doubt know the answer in the Zune Newsgroup above.
See you soon. Mick Murphy - Microsoft partner
-
How can I get the media which has been recorded on Windows Vista to play on Windows XP?
Hello Forum... I would like to download/copy of the video programs & TV on my external drive seagate, primarily from my friends laptop, so I check it plays ok. When I get home it will not play on my Win XP Pro and just freezes my laptop, is there a fix or somethink for Win Vista Home Premium so that it works with my laptop Win XP Pro... Thanking you, yours sincerely, liam k
I'm surprised VLC didn't work... I wonder if you
a problem with your video driver. This may have a
Update. In some rare cases updates automatic in Windows
will install a video driver that is incompatible with
your system than the one you already had. In this case...
a system restore driver or the restoration is expected to dissipate it.Reduce the hardware acceleration of your chart may
be worth a try:How to put in back of graphics hardware acceleration
http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
(scroll down to: "If you are using Windows 2000 or XP")
(try to move the cursor notches 4 (everything except left
the last of them))If they improve the question, you should look for the
site Web of MFG. your video card
a updated driver Win XP compatible video. Or...
If your computer is a laptop... Search support
site of the manufacturer of your computer.Improvement or not... don't forget to return the cursor
to full.In any case...
If you drag and drop the. AVI on the following utility... it
will tell you if it's a DivX file or possibly a Xvid file.GSpot Super quick start
http://www.headbands.com/GSpot/v26x/Quick_Start.html (FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)* Proceed at your own risk *.
DivX Codec
http://www.free-codecs.com/DivX_download.htm XviD Codec
http://www.free-codecs.com/download/xvid_codec.htmGood luck...
-
can I uninstall old programs that have been updated
HP pavilion dv6
Although I can
-
How can I retrieve a Partition and its data, which has been formatted and remove, HELP
THIS TOPIC IS CURRENTLY: [RESOLVED]
can I recover a partition that has been formatted and deleted... I had some very important images on a new partition I created. I went to format the partition that my windows was on and I accidentally formatted and deleted the wrong partition, Please HELP
THIS TOPIC IS CURRENTLY: [RESOLVED]
Thank you for helping
Well, I return it illuminates... I got it on the C drive and I got it on the disc that I formatted and deleted
-
Original title: blackberry 9300 curve
BlackBerry curve 9300 old meeting calendar which has been removed again try to sync and gives an error message
Hello
(1) did you remove the meeting in the calendar on the computer as well?
(2) what is you get the exact error message?
I suggest you to contact the Support of Blackberry to get better assistance.
Here is the link: http://us.blackberry.com/support.html?lid=us:bb:support & Cal = us: bb:support
-
How can I reinstall the demand for 'People' in windows 8, which has been accidentally uninstalled by me?
You can reinstall it from the following link:
-
Please can you help. My PC has been repaired under warranty during which the motherboard was changed. I cannot now use CS6 design standard because I assume that he thinks it is on another computer. Previous activation was very good. What should I do now?
Try contacting Adobe personal chat:
-
It has been updated the program on my computer and all of a sudden stopped at 83.3% can help
Hello
Could you please provide the name of the application you are trying to update.
Kind regards
Hervé Khare
-
I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
Can someone help me solve this problem?Do you know when this problem started? Try a system restore to a point in time BEFORE the problem started. Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. Don't forget to check the box to show more than 5 days of restore points. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates. But I guess it's too late for this for so long that there are probably no so old restore points.
If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html. You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.
If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking). Then we will check some of your system files:
Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.
Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.
While in the command prompt, type chkdsk /f /r and enter and let it run. It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.
If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer). Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html. From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).
If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone). Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884. Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc). You can have a lot of updates to re - install (including all you need to remove service packs). If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.
I hope one of these procedures can solve your problem. If this isn't the case, after return and we will try something else. Return message anyway so we know how it turns out.
Good luck!
Lorien - a - MCSE/MCSA/network + / A +.
-
How can I remove a program locked from my mac
How can I remove a program locked from my mac
Please explain what a "locked" program
In general, any application that has been downloaded from the Mac App Store can ve just moved to the trash and deleted.
Applications that have been downloaded from other sources can be similarly moved to the trash, or they come with their own scripts 'uninstaller '.
-
Original title:
Problems with rip audio CDs with windows media player
Bought the CD now 82 and try to tear with the windows media player player, but keep getting the message "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted." What should I do to rip this cd please did tear previously no probs, but now seems to have a problem
Thanks in advance
Anne
Hello- You did changes to the computer before the show?
- Are you able to extract other CDs using Windows media Player?
- What is the file format of the file you are trying to extract?
Method 1:Step 1:You can run the Windows Media Player Library convenience store & check if you are able to rip CDs.Step 2:Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Method 2: Rebuild the windows media player.exit Windows Media Player.
b. click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
c. Select all files in the folder, and then click delete on the file menu.Note:You don't have to remove the folders that are in this folder.c. restart Windows Media Player.Note:Windows Media Player automatically rebuilds the database.If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:exit Windows Media Player.
b. click Start, type %LOCALAPPDATA%\Microsoft, and then click OK.
c. Select the Media Player folder, and then click delete on the file menu.
d. restart Windows Media Player.Note:Windows Media Player automatically rebuilds the database.Method 3: Disable and enable the windows media player. Follow these steps:
a. open the Control Panel from the Start menu.
b. open programs and features in Control Panel .
Note: If the programs and features are not available, change the view by large icons at the top right of the control panel.c. Select Windows turn on or off features in the left column of the window programs and features.
d. click on the plus sign next to multimedia functions.
e. uncheck Windows Media player and then click OK. (You may receive a warning message. Click on the Yes button.)
f. restart your computer.
g. to reactivate the Media center follow the same steps and place a checkmark for Windows Media player.
h. click on the Ok button.
i. restart your computer.Reference:Turn on or off Windows features
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-offMethod 4:Change the location of Rip. see the steps mentioned in the link
given below:
To change rip settings in the Options dialog box
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-musicI hope this helps!
Maybe you are looking for
-
iMessage how to block people? iPad iOS Mini3 10.
Hey everybody! I have a small question, I received a message from a person I do not know and I would block them, I don't really know how well. Again, I am on iOS 10.0.2 and my device is an iPad Mini 3. Any help is appreciated, thanks! -John
-
When I right-click on an image that I order to save on the web on my computer, the menu drop-down is displayed. And there, the topic "save image under" will this stupid "image send by e-mail! When I right click too, sometimess I miss and choose the "
-
It is near 2016... but I still need a desktop computer!
There are card readers to import data from cards of memory to an iPad, so your photos and most of other digitized data can be imported. But even the iPad Pro does not have the ability to import my cd collection. I have, because I think a lot of peopl
-
Update of ListView dummy image using images from URL http
Hi guys... Please help me with this. I have created a ListView in QML file and filled with data received from a webservice. Since this web service provides all the images, I have to place a dummy image at this location. Then I used another method to
-
WLC 802. 11A / n Radio regulatory domain question
Dear all We are facing a problem with a customer where a Cisco 4400 Series controller blocks the 802. 11A / n Radio Interface of 1250 access point. Radio broadcasts like down on the controller to GUI. The error message on the GUI, it's that the "regu