can I remove virus the device connected to this unit?
- I want to clean virus on my cell phone
Could you give a bit more information?
Are you saying that you think the phone has a virus on it and you want to get rid of him?
Tags: Windows
Similar Questions
-
After new OS installation can not see all the devices connected on satellite
I recently reformatted the computer because I had a lot of problems, after doing so I tried to connect to the internet, on that I just plugged the ethernet cable, the light on the modem was flashing and I opened the network connections, but the network device was not there. e.g. connection to the LAN 1, etc.
I also have another problem. I opened the Device Manager and could not see any of the connected devices.
can anyone help?HI Kamal,
If you have reinstalled just your system from the recovery CD then you will also need to re - install one of your devices (including your Internet connections) installation CD that came with them.
The recovery CD contain only the Windows base operating system, as well as the software provided to Toshiba and to my knowledge, this does not include the ISP software or connections.
Kind regards
-
Is there a way to see the ip address of the devices connected via the airport?
Hello world
Is there a way to see the ip addresses of the devices connected via the airport? I can see the name of the devices but not what ip are they?
Thanks in advance.
Open AirPort Utility
Hold down the option on your Mac so you double-click on the image of the AirPort router
Wireless clients are displayed
Click on the small arrow next to each wireless client to see details about the device and the connection
-
Names of the devices connected to the router
How can I tell the names of the devices that are connected to my router E2000? Cisco connect says I have 4 devices but I only have 3. I'm trying to understand source of the 4 device.
Open the Cisco connect software. Go to "Setting up the router" and click "Advanced settings". Who will open the router configuration page.
Click the status tab. Go to the tab "Local network" sub on the button "DHCP Client table". Here is a list of the devices connected to the network.
-
I am currently using Windows vista. I face a problem that I can't remove all the files in the form of MPEG-4. And the error with code 0x800704C8. What should I do so that I can delete these files? Please kindly help me to solve this problem. Thank you.
original title: Code 0x800704C8...Hello
Did you change your computer?
Method 1:
Step 1:
I suggest you follow the link and check.
What are the permissions?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions
Step 2;
Why can't I delete a file or a folder?
http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Method 2:
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate
-
I delete an email, how can I remove it &; the sender of a search?
I delete an email, how can I remove it & the sender of a search?
I assume you mean global search. If this does not work, you can rebuild its search-db
https://support.Mozilla.org/en-us/KB/rebuilding-global-database
-
Qosmio G50-12 q - how to configure the devices connected to the USB mode standby
Hello
I wanted to use the PC sleep function.
I also wanted to as devices that have been extinguished when in stand by.Once implemented this function the PC will regularly stand-by, but the device connected by usb are set on fire, any other master type, a device a usb wi.fi, etc.
Someone told me that maybe some functions in the Bios only are not put in place to do that once entered the booth by the PC off all devices those connected.
What checks and I have to perform in the configuration PC bios?
How we in the bios? By pressing the keys on which?
Thank you
* valkyrie @ *.
Please post comments if workaround posted by Akuma helped!
It would be really appreciated.
-
After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA
You can change the appearance of a selection by clicking on "reading list" in the upper right of the iTunes window. The desired view is probably "tracks"
-
why I can't take a new picture and I can't remove all the images of photos.new will not be saved
Check your storage space on your iPhone, iPad and iPod touch - Apple Support
-
How can I remove all the unused files to clear a space
How can I remove all the unused files from my computer
You can remove applications on the control panels. XP seems to me (im not on a XP ATM machine) programs cpanel
Files? you do not (or should not) delete separately
-
How can I remove all the files from adobe?
How can I remove all THE files from Adobe? Including apps, preferences and all folders containing old items. Thank you!
Use of the Adobe Creative Cloud cleaning tool to solve installation problems can help
-
Original title: the answer useful?
Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hi team,
We have EX and DX series telepresence as endpoints agent. But DX series phones are facing issue "the device associated with this extension or the dial number is not valid" when checking in the agent. EX works very well. Both phones are properly recorded in CUCM.
Can you please help me out here to solve the problem.
Thanks in advance,
Sisi.
In my case, we tried to do a few different modifications here and there on the DX650 but never managed to do work. Randomly, I was able to connect to the fineness with the DX650 as my camera, then my colleague could not connect to the Finesse with his 9971 as his camera - (keep in mind this was in an environment of model and it was just her and me as agents). Since I saw this strange behavior and doesn't do not sense, we rebooted the server CCX. Once she is back to the top, we were also well able to connect successfully and had not had the problem since.
Thank you
EK
-
I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)
Hello
I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:
http://support.Microsoft.com/kb/310123
It will be useful.
-
Can I change the names of the devices connected by Bluetooth to make them more recognizable?
I have a number of devices that can be connected by Bluetooth, for example, speakers, keyboards, etc. It is often difficult to remember the descriptive name that many of them are similar, for example "keyboard Bluetooth."
These names can be changed so that they are easily recognizable, for example of a number/letter combination to tell LG amplifier?
Right click on the device in the Bluetooth system preferences and select Rename.
Maybe you are looking for
-
HP deskjet 3630: HP Deskjet 3630 works only with MS word or excel
I bought an HP deskjet printer 3630 recently, I followed the online instructions to download the latest drivers. It can print stuff with chrome, but not with word, excel and ppt. I connected the USB printer. There is no error message. I see the print
-
Ex487 MediaSmart Server - backup server
I have a MediaSmart Server Ex487. I have it set to save my home computers and that works very well. However, I would also like to back up the server, but would like to make him a portable eSata disk or internal hard drive. However, the only option
-
installation of iTunes says it is incompatible
Original title: Compatible program I installed iTunes, but I get a pop up stating that it can't open because it is not compatible. What should I do?
-
Hello I have an E3 Plus with Flipcase duo. In the small window Flip case, I can see the time and a few weather symbols (showing a Sun and a constant temperature of 0 degrees. If I slip there is another window with symbols of player, but nothing happe
-
WHY I CAN'T OPEN ATTACHED LYNC. JPG FILES
. I clicked on an attachment in a mail sent to me, however, when I try to open it, it shows no I can't connect to Lync .