Can I save password and site settings during the upgrade?

Similar Questions

• Passwords and fingerprint reader during the upgrade of Windows 10

  I bought my laptop, his RESUME, and it came with a fingerprint reader so that I would not type my password every time I need to connect. Now, I like this feature, and as someone who can't remember passwords unless you have to use every day and auto fill is not an option. Now I don't have add a password for my laptop and I remember to change once before but I forgot a new and the trick is no help whatsoever. I want to upgrade to Windows 10 now I don't know if the finger print scanner will still work as my password or if the sick have to implement again and if I still need the password. Help, please.

  Your problem is common for people using a fingerprint reader. Here's what you should do to put the machine on a secure basis:

  1. Logging in as an administrator account.
  2. Click the start planet.
  3. Type cmd.exe in the search box.
  4. Press Ctrl + Shift + Enter
  5. Click on "Run as Administrator".
  6. Type the following commands and press ENTER after each:
     NET user "user %%nom" 123456
     (to set your password to 123456)
     Abcdef spare NET user / add
     (to create an account to spare with a password to abcdef)
     net localgroup administratore Spare / add
     (promote spare account to admin status)
  7. Open a session under the alternative account to test it.
  8. Details of these two accounts on paper of the document.

  The alternative account is necessary as the spare for your home key is necessary. If you don't have a spare account, what will you do if something goes wrong with your main account? You'd be in diabolical trouble!

• The 'Pro' fonts are losing black and Light versions during the upgrade to El Capitan

  Adobe software - it's great. Unusual to have a problem, but I have a. I often use the pro fonts because they are equipped with a wide range of variants - not just "normal, bold and italic" - but "light, normal, medium weight, fat, black, condensed and italic. During the transfer to El Capitan, all variants of light and black people of all the fonts seem to have been laid. If Adobe asked me, I would have these fonts returned to me :-) Anyone know a solution?

  Software creation Cloud installs variations less than standard fonts such as Minion Pro and Myriad Pro.

  You should look to see what are the versions of these fonts are available as part of your subscription to CC through Typekit. In InDesign CC, CC Illustrator and Photoshop CC, you can click on adding fonts Typekit option in the Type menu to start looking. And look for hundreds of other policies as well.

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• How I easier can I migrate my settings during the upgrade of the CC-> CC 2014

  Have updated several times before (CS5-> CS6 for example) where the parameters such as the workspace shortcuts keyboard, actions etc. have been migrated easily.

  Now, with the creative cloud, I guess an update even more transparent. I was a little disappointed by the concept of installing a * new * app ("Photoshop CC 2014", alongside "Photoshop CC"). But even more disappointed when I saw that none of my app settings have been migrated.

  What is a 'function' or me something wrong?

  (I hope that the latter, but fear it's a feature after that I talked to a guy on the support chat)

  There was a lot of discussion on this one. Adobe wrote settings sync work between dot versions, see: helps Photoshop | Sync settings using Adobe Creative Cloud

  Considerations: Migration and synchronization settings

  • Synchronization settings will synchronize settings between installations of the same major version of Photoshop. For example, the settings are synchronized between a CC Photoshop version 15.0 and a CC of Photoshop version 15.1 installation.
  • Settings Sync does not synchronize the settings through the facilities of different major versions of Photoshop. For example, Photoshop CC 14.1 version settings are not synchronized with an installation of the version of Photoshop CC 2014 (15.0).

  Migrate settings from one major version to another

  You can migrate presets/settings of one major release of Photoshop to another in one of the following two ways:

  • At the first launch of the new version of Photoshop, you are prompted to migrate settings preset/settings. Click Yes.
  • At any time, select Edition > Presets > migration to migrate settings Presets.

  For more information, see preset migration.

  Note:

  Preferably the main file is not migrated as part of the migration of predefined parameters.

  This has been discussed by other users for example in the topic: CC to CC2014 sync settings

• Forgot password and now stuck to the 'Upgrade Coup'

  Last night, I installed a password before going to sleep because my brother mess with her when I'm asleep and when I woke up I forgot my password more. Reviewed online for solutions and I tried to restore and now I'm stuck on 'Shot of Upgrade' with a forgotten password and iTunes will not access the iPhone unless I unlock it.

  1 - put the device in DFU mode.

  STEPS FOR DFU MODE

  Hold the Power button (4 seconds)

  Continue to hold the power button and also has the home button (20 seconds)

  Release the power button while continuing to press the home button (10 seconds)

  Your device should prompt with the "Connect to iTunes screen.

  2 - plug it into your computer and open iTunes. It will ask whether to restore and update or restore manually by following these steps.

  the steps restore to iOS

  Before you restore:

  Make sure you use the latest version of iTunes.

  Back up your device.

  Transfer and synchronize content on your computer.

  Restore your iOS device

  Connect your device to your computer.

  When it appears in iTunes, select your iPhone, iPad or iPod touch. Select the Summary tab, and then click Restore.

  Click on restore.

  After a restore, the iOS device restarts. You should see "slide to put in place". Follow the steps in the wizard to install iOS.

  Restore your device from an iCloud or iTunes backup - Apple Support

• HP LaserJet 300 CE903A Prod: How to change the password and user name during the analysis of the function of email from HP laserjet 300

  Try to set up the e-mail function analysis. Using the button on the printer, I go as far as to go to outgoing SMTP and then I get an error message that the user name or password is incorrect.    I don't know what is the right user name or password.

  I want to get rid of whatever information incorrrect and redo information.  Nobody seems to understand the problem.  Any help?

  @Ray2905

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar

• support mizilla site can't remember password and ID

  support mizilla site can't remember password and ID, is ture?

  Do you hear the names and passwords in the password manager or do you mean that you are connected is no longer on to (remember to) Web sites after the closing and restarting Firefox?

  Let this last book, you must have an exception allow cookie for the domain support.mozilla.org (Tools > Page Info > permissions)

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

• Firefox does not save passwords and plays videos without sound

  My firefox is not asking to save passwords since I updated to the latest version. There passwords saved in the earlier version, that work well. but he adds more new passwords. It is not connected with banks and these sites. It does not save password for any site, and it does me not even an option to record. (I kept recording Yes password option). Another problem is that it plays without volume youtube videos while my IE works fine for these Web sites.

  This has happened

  Each time Firefox opened

  Since I upgrade 3.6.3

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 6.0; Chrome/5.0.375.70 en-US) AppleWebKit/533.4 (KHTML, like Gecko) Safari/533.4

  Make sure that you are not running Firefox mode of private - browsing using Firefox without saving history .
  In private browsing mode that some menu items are disabled (in gray) and some features like the visited links and others are disabled and does not.
  You're in private browsing mode, if you see "tools > stop private browsing."
  See Private Browsing - use Firefox without saving history and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
  .....
  You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  To view all the history settings, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  Uncheck the box: [[] 'Automatically start Firefox in a private browsing session']

  See also http://kb.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)

• can not connect password and username on.forgot

  can not connect password and username on.forgot

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of any other connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Other than the foregoing, this forum has a policy that prohibits assistance to crack passwords.

  Tricky

• I have grandsons laptop at home. HES forgotten his password and I cannot remember the admin password that I put on it. How can I unlock it?

  Original title: locked.

  have laptop computer grandsons at home, hes forgotten his password and I cannot remember the admin password I put on, how can I open it

  XP - if you forgot your password:

  http://support.Microsoft.com/kb/321305

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

  Maintaining secure passwords - Microsoft strategy on getting around passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.

• I created an admin password, but when I restart my computer, I can connect without password and I need to create a new admin password each time

  I created an admin password, but when I restart my computer, I can connect without password and I need to create a new admin password each time

  Open a high command prompt, and then type these commands:

  NET user "user %%nom" | more

  (to check when you change changed your password)

  NET user "user %%nom" 123456

  (to change your password to 123456)

  Now, restart Windows and check if the problem persists.

• I can't save anything to any folder of the user. I get a message that I don't have permission and admin contact.

  Cannot be saved in my folder

  When I came to my computer, I had no problem recording on any folder of the user. Then, recently, my hard drive was a
  malfunction and I lost all my data and I have OS Win7 reloaded. Now I can't save anything to
  any folder of the user. I get a message that I don't have permission and admin contact (which is me).
  I would like to know how do I configure admin so I can save anything in folders.
  This feature for you telling the truth is a real pain. It's a family computer then why is it necessary?
  Some help would be appreciated. »
  Bob

  What you say seems very strange. Let's drill a little further:

  1. Click on the globe to start, type three letters cmd and press ENTER.
  2. Type the following commands EXACTLY as they are and press ENTER after each one:
     MD C:\Logs
     Set Log=C:\Logs\Log.txt
     NET user "user %%nom" > Log %
     the value > Log %
     Copy Journal % c:\Users\Bob 1% > Log % 2 > & 1
     cacls c:\Users\Bob > Log %
     Notepad % log
  3. Mark, copy and paste the text into your response.

• Screen saver does not stay on during the night

  I have problems with my computer screen saver does not stay on during the night.  In addition, we noticed that the computer must be restarted during the night. Instead of the screen saver up and running in the morning, the computer is the login screen.  Our computer is turned on all night and not located to get to sleep.  Ideas or settings that I need to check?

  Hello William,.

  Thank you for the update.

  You can try to follow the following suggestions to solve the problem.

  Method 1: I suggest you perform the clean boot and check if the problem persists because, put your boot system allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform the clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting ' to reset the computer to start as usual after a repair.

  Method 2: I also suggest you to remove the schema of eating plan and create your own plan from the link and check.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  See also:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

  I hope this helps. Otherwise, please free to write us again and we will be happy to help you.

  Thank you