Can I take a photo screenshot?

Similar Questions

• How can I take screenshot on Mac OS to ask the question here?

  In Mac OS 10.6

  I want to take a screenshot of part of my Arrtboard with panels open to put a photo here of a few problems I encounter, but when I Grab mode, it hides all my panels and shows that my work plan.

  How can I take a screenshot of the artboard and signs?

  Thank you.

  Command-Shift-3

  or

  Command + shift + 4

• why I can't take a new picture and I can't remove all the images of photos.new will not be saved

  why I can't take a new picture and I can't remove all the images of photos.new will not be saved

  Check your storage space on your iPhone, iPad and iPod touch - Apple Support

• 4545 proBook s: screenshot? How can it take a screenhot?

  Hello.

  How can I take a screenshot on my laptop? (4545 proBook s / HP)

  I have no button "stamp". I did not write in blue buttons!

  Thank you very much

  It depends on the operating system installed.

  For Windows 7 and operating systems newer, Windows clean cut tool is the utility program preferred to take screenshots.

  What is the operating system that is installed in your laptop?

  Windows 7 cutting tool

• I used the tool to take a photo of my document from adobe.  Where can I get this image?

  I used the tool to take a photo of my document from adobe.  Where can I get this image?

  Hello adobe191,

  In order to take a picture of your PDF document, you may have selected "Edit > take a snapshot.

  Click anywhere on the page, then drag a rectangle around the entire contents (including text and images) showing a dialog box:

  

  Once you click OK, your selection is automatically copied to the Clipboard when you release the mouse button.

  You can then paste it into another application (i.e. MS Paint) or target any other document.

  Hope this information helps.

  Kind regards

  Ana Maria

• where can I see the photos 'print screen '?

  where can I see the photos 'print screen '?

  They are in the Clipboard. If you paste into a paint program (type mspaint into Start - Run all programs - accessories -) or a text editor (Start - All Programs - Accessories - Wordpad). Also see the tool captures to capture the screen (Start - All Programs - Accessories - Snipping Tool).
   
  Copy the screen [Prev |] Next | Content]

  PRT Scn	Copies the entire screen to the Clipboard as a graphic or the screen with the mouse if you are using multiple monitors. Use MS Paint to paste the picture. It is also known under the nameof Office Snap. According to the key parameters of Prt Scn tab Misc properties of a Dos program, a program back can still print on printer Prt Scn keyed.
  ALT + Prt Scn	Copies the active window to the Clipboard in the form of a graph. This is also known as theWindows Snap.
  CTRL + Prt Scn	Copies the entire virtual screen when you are using multiple monitors in the Clipboard in the form of a graph. Unlike the other two screens to Print that precedes this one doesn't seem to have a name, or if so, it is not listed in the header of the window files.
  CTRL + Alt + key number minus button	Copies the active window to the Clipboard of remote desktop in the form of a graph (same as thePrt Scn locally)
  CTRL + Alt + number Pad Plus key	Copies the entire screen to the Clipboard in office to distance in the form of a graph (same asAlt + Prt Scn locally)

  Such programs that Outlook Express do not allow paste not web graphs. Paste into MS Paint andrecord under a web graphics. If the screenshot by email sending save it as a jpeg, gif or png file before sending (in MS Paint,file - save as, and then choose a format in Save As Type). The color isn't usually important for the screenshots is a way to make a really small file save as a GIF (this reduced to 256 colors), and then save the Gif to Png (lossless and better than Gif compression) or Jpeg (lossy).

  To take screenshots of the menus in the current use of the window the Alt key and hold it down during the entire procedure. ALT + a touch of letter to access the menus, then the keysdirection to move the selection, then Print Screen. Release Alt.
  --
  .
  --

  "Chrystalstrick" wrote in message News: a6a8f42c-03e9-429 d-91e8-6bca342fa0c6...

  > where can I see the photos 'print screen '?

• How can I create a photo book using Photos app on an iPad mini?

  I know how to create a photo book using Photos on a MacBook Pro app.

  I want to know if a photo book can be created using the Photos app on my iPad mini. If so, how?

  Hello imawa,.

  Thank you for using communities of Apple Support.

  Yes, you can certainly create a photo book on your iPad mini. Take a look at the following article to learn how to create a photo book.

  iPhoto for iOS (iPad): create a photo book

  See you soon.

• How to take a photo from facebook and download it to my photos?

  I want to take a photo from facebook and save it in my files. How can I do this?

  Honestly, I don't think that it is more difficult to tell you how to save pictures, it is to find a specific article and put it in.

  Click with the right button on the image, select Save image as, choose where you want to save and click Save.

  Is it really so hard to tell who?

• I have a canon eos rebel sl1/100 d. I can't take a picture.

  I can't take a picture. The battery works, the memory card has been reformatted. I had the unit about 6 months. I took a lot of pictures on vacation this summer. I uploaded these photos. I started taking pictures, and I can't get a picture.

  If the unit is in 'One Shot' factory default mode, so should not be a picture unless it can confirm that it was able to lock the focus on a subject.  No accent... no picture.

  If, however, you reverse this little switch on the side of your lens that says "AF/MF" on the "MF" position (it is 'Manual' and AF is "Update automatically") THEN you get an exception... "MF" position, the device is ready to take a picture no matter if she thinks that the image is sharp or not... He doesn't care.  Touch that little switch to "MF" you said on camera that YOU will take care of the update and it is not not to consider the development at all.

  If the camera will take a picture (even if it is blurry) when the lens is in a position to "MF", this means the reason why he was not taking a picture before is because of his inability to focus.

  There may be a few reasons why a camera could not focus.

  (1) not enough light: to test this situation... just go to a place where there are a lot of light.  ... Outside in the middle of the day.

  (2) a problem with one of the systems of development.  It turns out that your camera has in fact two systems different focus (completely independent).  One is used when you are looking through the viewfinder to compose the picture.  The other is used if you use the live view screen to compose view.  The reason why there are two different systems is because your camera has a mirror inside.  When you look through the viewfinder, you are actually looking through the lens.  To do this, they need to put a mirror between the lens and the sensor, so you can browse through the same lens that camera is to use.  But which reflect the light to reach the sensor blocks.  So they actually have a system of development that does not use the sensor and can focus when the mirror is in the way that (the mirror of the part of the light bounces actually in focus sensors).  When the mirror went away (for the live-view shooting) it obviously can flip any light in this special focus sensor.  To remedy this, it uses image sensor of the camera work on the update.

  The two systems are independent, and the only thing in common is that they both send instructions to the lens to move the focus in or out.    If a system of development does not work... try another (update looking in the viewfinder... and test development using the "live view" mode (only not looking in the viewfinder.))

  (3) but that leads us to the third possible problem: the lens.  The engines of development (for any Canon camera) are in the objective... not in the camera.  The camera simply gives instructions to the lens it say how adjust the setting to the point and to what extent.  Is there a problem with the lens, then it can not focus... even if there is absolutely nothing wrong with the camera itself.

  If you have a different purpose, you can swap lenses and see if the camera still has a focus problem.  If it has only a focus with a particular lens problem... it's the objective that needs service and not the camera.

• How to take a photo with the Acer Iconia W 4 820

  Hello

  Anyone know how to take a photo with the Acer Iconia W4 820 Tablet and get it back on my pc?

  hans0919

  Easiest is to copy the files with a USB key, but the most elegant (IMHO) is across the network. Just join each machine to your homegroup, and you can copy back.

• Windows Photo Gallery can't open the photo scanned, says not supported

  Windows Photo Gallery

  I scanned my curtain to the Windows Photo Gallery, so I can take a picture of the pattern on the curtain.  It seemed ok scan but when I try to open it I get this message: "Photo Gallery can't open this photo or video.  The file format is not supported or you do not have the latest updates to the photo gallery. "I see no updates and it is a jpeg so why don't it opens?

  Sandee

  You can open the scan with Windows Paint?

  You scan from within photo gallery?

  ... File / import from a camera or scanner...

  Have you tried to save the .jpg scan to a folder
  and then add the folder to the Gallery?

  ... File / include a folder in the gallery...

• Photo Gallery can't open this photo or video. This file is not supported or do not have the photo gallery updates

  the problem, it gives an error saying "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest photo gallery updates ".» I only have this problem after using control screenshot, paste to paint and then save. Then, I get the error while trying to open in the photo library. I tried to re-open it in paint, but it gives an error saying "the paint cannot read this file. is not a valid bitmap file, or its format is not currently supported. »

  Install the codec from the following link:
  http://www.filehippo.com/download_klite_codec_pack/

  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-music-pictures-video/126532-Photo-Gallery-cant-open-my-pictures.html

  All the best!

• Photo Gallery can't open the photo because you are not allowed access to the location of the file

  Photo Gallery can't open the photo because you are not allowed access to the location of the file some of the image are open

  Click on the folder and change your permissions for it and all subfolders and files all rights and if necessary take hand the case (and maybe the parent folder or even its parent - and all of the subfolders and files) until you have the permission you need.  Here are the general procedures to help you:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry smartphones can not take pictures with my blackberry 9800 torch

  Hello! I can't take pictures with my bb torch 9800.
  Everything on the camera is OK, the problem is when I try to press the button to take a photo: nothing happens; It's as if I do not press even though the flash lights.
  In short; My bb torch refuses to take pictures.
  What can I do to solve this problem.
  Thank you
  Concerning

  Try a battery pull if you please, with the BlackBerry device powered on, remove the battery 15 seconds and then reinsert the battery to reboot the device. This will clear all hide as restarting a PC. Then try again and see if the problem persists.

• can I connect my photo rt library surface to my skydrive account

  When I take pictures with my Rt surface, can it automatically transfer the photos to my skydrive while account that its connected to my Wi - Fi network domestic

  Thanks Atthisaddress,

  It turns out that Surface RT users can navigate in the photos app and select photos, then slide the right scope, they can 'share' to their skydrive account manually.

  I hope it is a temporary solution because it is not slippery. It would be a nice improvement to allow a car push the library of images to Skydrive account... Heck, I'd pay for this app, hint, hint developers.