Can I use virtual channel to connect the different tasks?

Similar Questions

• Can I use PXI embedded controller connected to the PC under LINUX operating system

  Hi all

  We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.

  Can I use PXI embedded controller connected to the PC under LINUX operating system?

  If Yes, where can I find its configuration in the .ini file?

  Thanks in advance.

  Hello bachir_elec,

  I'm sending you two links that I don't provide the information you need.

  Using Linux on an Embedeed PXI controller:

  http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument

  Configuration of your PXI Linux system:

  http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument

  You can take a look?

• Exchange server and Surface RT, can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Hello

  Our company uses an Exchange Server for email, contacts and calendar.

  Can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Kind regards

  Matej

  You must install the SSL certificate before connect you to the Regional service, the easiest way is to go to "desktop" IE10 open, go to the exchange server web access page, click on the notification of "certificate error" red and view / install the store "certificate authorities roots of trust." Then, make sure that your surface RT complies with the minimum requirements of security then connect to the exchange via the mail application server.

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.

• Can I use ODBC drivers instead of the JDBC driver?

  Hello
  
  Can I use ODBC drivers instead of the JDBC driver? If yes what are working all the steps I have to take the ODBC driver to do?
  
  
  All answers are appreciated.
  
  
  -CHikk

  Hello

  Yes, it is possible.

  Simply create the ODBC connection to your windows and then the link to the topology using the bridge Jdbc-Odbc Driver.

  This help you?

• How can I use my watch to snap the shutter on my iPhone?

  How can I use my watch to snap the shutter on my iPhone?

  Click here > https://help.apple.com/watch/

  Then click on: Remote Camera on the left.

  You'll see instructions.

• Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode.

  Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode. When I start the browser is not open and it displayed a message
  Mozilla Crash Reporter

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; InfoPath.3)

  Go to the address on: plant and tell us your last accident IDs. Then we can watch data specific to your accident and have a better idea of what is causing the problem.

  Given that everything goes well in safe mode, one of your extensions or themes is at fault. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems to figure out which one of your modules is the cause of the crash.

  Start here: https://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes#The_problem_does_not_occur_in_Safe_Mode

• I have four recovery disks that after I bought my computer, I did. These disks can be used to install Windows on the new drive?

  My computer came with Windows 7.  Recently, my hard drive failed.  I have four recovery disks that after I bought my computer, I did.  These disks can be used to install Windows on the new drive?

  YES!

  I just did mine 01/01/2016, installed a new WD 500 GB HDD black on my laptop ASUS K52F, took my DVD 4 restore disks and restored to Win 7 Home Premium, more 10 Windows, which is sitting on my old HDD in the trash. I'll stick with my Original OEM OS and never improve to WIN 10 times.

  NOTE: The only time the restore disks do not work is when you replace your motherboard.

• How can I use my current windows7 for the new portable computer

  Original title:

  Windows 7

  Hello

  I bought the original windows7 and I currently use it in my laptop. I recently bought a new laptop and now I want this original windows 7 on my new laptop.

  How can I use my current windows7 for the new portable computer

  Please notify

  Concerning

  Run you where you are unable to activate code product. It gives you a list of phone numbers for Microsoft to ring.

• I can't use illustrator because it took the serial number

  I can't use illustrator because it took the serial number and I uninstalled the app and redownload again my computer Illustrator program. But I can't download it. Help, please

  Windows or Mac?

  
  

  If you have not installed Adobe Creative Cloud app, you can download at the bottom of the link:

  
  

  Windows:

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Mac:

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  Reference:

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

• Images uploaded by share subscription can be used by a company in the same division?

  Images uploaded by share subscription can be used by a company in the same division? If I alter the image or do not change it? They will not change it, just posting on a blog or other social media.

  Yes, provided that they fall within the license agreement.

  http://wwwimages.Adobe.com/content/dam/Adobe/en/legal/servicetou/Adobe_Stock_Terms_en_US-2 0150313_hpc.pdf

• I can't use creative cloud. After the program open, I see backbone of creative cloud and empty space without all the icons. I want to download photoshop as I pay by bank transfer for Adobe...

  I can't use creative cloud. After the program open, I see backbone of creative cloud and empty space without all the icons. I want to download photoshop as I pay by bank transfer for Adobe...

  If you see a blank white screen, see this link. If you see something else, please let us know what you see.

  Blank white screen. Sign in | Creative cloud Packer

• How can I use SQL to check if the receipt is taken into account?

  Hi all:
  How can I use SQL to check if the reception of the AR is taken into account? Because there are so many recipes to check, I can not open to see the details one by one.
  
  My environment is: 11.5.9
  database: Oracle 9.2.0.8

  Terry,

  Run the script (11i: Oracle receivables data reception Data Collection Test [215969.1 ID]) and see if it helps.

  Thank you
  Hussein

• Can we average channel error using multiple channels to measure the same voltage?

  I don't know how correlated error terms are between measuring channels max, but it occurred to me that, if they were relatively independent, I might be able to sample the signal even with several channels and increase accuracy.

  For example, rather than measure a voltage with an AI only at 100 kHz, I could connect up to 10 different lines to HAVE the signal, sample to 10 kHz on each line.  This should allow to reach me on average some of the error associated with each channel (, or so I think).

  Can someone speak definitively to this?

  Thank you

  Sean

  Well, if you are using a MULTIPLEXED Board (everything is not specced for simultaneous sampling) then each channel is connected to the ADC even one after the other, best that you would be able to do is extremely, extremely small variations into the paths of each channel of the multiplexer.  This would still be massively overshadowed by the inherent noise from the system and the accuracy of the device.

  Your best bets to reduce the measurement error is to oversample in one way to reduce the effects of noise and to calibrate the unit before starting each test to keep variations of temperature.  In addition, make sure you keep your calibrated Board (most of the boards have a calibration 1 year of the cycle).

  For some applications, you should also consult wiring field and considerations of noise for analog signals, How to eliminate ghosting of my measurements? and Troubleshooting unexpected tensions, floating or crosstalk on Analog Input Channels to better account for ghosting and the issues of the hour.

• Can I use scan interface mode during the collection of the data of cRIO? How to view the data collected continuously on a waveform graph?

  Hello

  I intend to use cRIO as a standalone device to collect certain data off a tachometer House.  My goal is to store the data in the cRIO chassis, since it has its internal memory, but I can't even a cluster of data of the analog inputs of its devices.  I dragged and dropped the channel I collect data in a while loop, but it is only a point.  I want to see the data from the different time, what should I do?  Is this possible in Mode Interface Scan?  If Yes, could someone give me a simple example that shows streamed on a waveform data?  I would be very grateful!