Can LOV in report - I call a JavaScript on change?

Similar Questions

• How can I automatically run a stored procedure when a report is called?

  I've created a classic report on a table (without screen). When I go to this report, I would like to the stored procedure that deletes and inserts information about the table that is based on the report has been started automatically. Where and how can I do to put the call to the stored procedure that the report displays the data once the report is called?

  Thank you!

  Mark1970 wrote:

  I've created a classic report on a table (without screen). When I go to this report, I would like to the stored procedure that deletes and inserts information about the table that is based on the report has been started automatically. Where and how can I do to put the call to the stored procedure that the report displays the data once the report is called?

  Create a page of PL/SQL process by calling the procedure with a Point process On Load - front of regions.

  The report is based on a global temporary table?

• In cascade LOV and calling a javascript function thro dynamic action

  We have a page where there are lovs cascaded to the country / state. The selection of State list is cascaded with country LOV. We also request a javascript to normalize the child lov (State), so that if there is no value in the list, the lov will be disabled and if there is only one value for show, which will be set as default (enabled). However, it seems apex runs javascript code standardize everything first and then generates the list for the lov State, then the State lov is always disabled.
  
  I created a page similar to apex.oracle.com with choice of Department lists and employee. The link to the page is http://apex.oracle.com/pls/apex/f?p=40631:2
  
  In this page, the employee selection list is cascaded to the Department. (1) to any value other then 'IT' or no selection value in the list of DEPARTMENTS, the list of employees must be enabled and should list all the names of appropriate employees. (2) for the selection of the 'IT', it should be disabled with the default selection as "no data found". However it does not for 1). Could someone find the problem and give a possible solution.
  
  Javascript code executed (that thro NatStandardizeLOV1('P2_EMPLOYEE') dynamic action for Department change is lower.
  
  < code >
  function NatStandardizeLOV1 (pitem)
  {
  var obj = document.getElementById (pitem);
  obj. Disabled = false;
  obj.options [0]. Text = "SΘlectionner one..";
  
  
  If (obj.type is "select one")
  {
  
  If (obj.length == 1 & & (obj.options [0] .value == ": obj.options [0] .value == null))
  {
  obj.options [0]. Text = "No. Data."
  obj.disabled = true;
  }
  If (obj.length == 2 & & (obj.options [0] .value == ": obj.options [0] .value == null))
  obj.options [1]. Selected = true;
  }
  }
  
  
  < code >
  
  Thank you in advance,
  
  Natarajan
  
  Published by: Nikita on May 27, 2011 04:21

  Natarajan,

  The question is one of the time. You're service is running before the Ajax request (triggered by the LOV cascading) brings back the items. So change the 'when' of dynamic Action so that it fires the event "After Refresh" of the question of the Department rather than the event change.

  Kind regards
  Dan

  blog: http://danielmcghan.us/
  work: http://SkillBuilders.com/APEX/

• How can I remove a program called Browser support. I have not asked for it. I think it might come when I updated Adobe

  How can I remove a program called Browser Support?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one. Windows 8 already has integrated antivirus.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Error when you try to call the Javascript function in the ActiveX Web browser

  I have a requirement to call a Javascript function in a web page that is displayed in the browser's ActiveX control.  I have the control on the front panel, and I use the Navigate method to call to the top of the appropriate page.  Based on an example, I found, I'm trying to get a reference to the HTML Document so that I can then get a reference to the Fenetreparent.  There is a method of the HTML Window object called execScript who I'm calling.  See the attached image of the code (reference close calls do not appear, but when I run it, they are there).

  I can't the node property that returns the parentWindow reference.  The error I get is the following.

  Error-2147467262 LabVIEW: (Hex 0 x 80004002) No. taken such interface supported.

  Any ideas on where to go from here?

  

  Hello

  I have reproduced the issue and the error you are seen and tried to understand what is the solution.

  It seems that the problem is with getting the pointer to the parentWindow.  From what I read on MSDN, it's maybe a limitation in the use of an ActiveX control in LabVIEW. It seems like Internet Explorer creates the object of the window, and so opening in one ActiveX control you free access to this top-level object.

  Here could be workaround for javascript execution in your program:

  

  I would like to know if it works for you and if it will work in your program.

• Flash cannot call the javascript function in the local html file

  Hello!

  Us is to develop our first application on Playbook. It is an html file including a flash file and javascript code. Everything is packed in. in the file bar, a config.xml file and has been correctly loaded into the Playbook. Everything works locally (no web access)

  Everything works well except when we use an ExternalInterface.call("saveglobalscore",score) in flash that calls a javascript function in the .html file.

  In the actionscript3, we selected the "authorized local file access" and put the 'Security.allowDomain("*) '.

  Any ideas? Thank you!

  External interface tries to access the files packaged locally is currently a known issue.  I have not really of a calendar when or if this can be resolved.  It may be in the code base of flash.

• Call the JavaScript file java class in the native blackberry development.

  
  

  What you are looking for is the ScriptableFunction class.

  You can extend the script engine of a JavaScript object name to a ScriptableFunction Java class mapping.  In this example, if you called foo. JavaScript bar(), the BrowserField would facilitate a call to the invoke() method defined in the MyScriptableFunction() class:

  protected BrowserField _browserField   = null;
  _browserField = new BrowserField();
  _browserField.extendScriptEngine("foo.Bar", new MyScriptableFunction());
  

  Then you set your ScriptableFunction class like this and fill it with some Java code, you need.  Note: it only accepts strings as input parameters.

  import net.rim.device.api.script.ScriptableFunction;
  
  /**
   * @description Demonstration of using the ScriptableFunction class added to version 5.0 of the BlackBerry Device
   *              Software
   * @version 1.0
   * @author Adam Stanley, Developer Relations
   * @category BlackBerry BrowserField Development: ScriptableFunction API
   * @see http ://www.blackberry.com/developers/docs/5.0.0api/net/rim/device/api/script/ScriptableFunction .html
   */
  
  /**
   * This class can be used to represent a function in the JavaScript environment.
   */
  public class MyScriptableFunction extends ScriptableFunction
  {
  
      /**
       * User has invoked this ScriptableFunction from the JavaScript engine This example shows how to open the Messages
       * application and create a new message
       */
      public Object invoke(Object obj, Object[] args) throws Exception
      {
          if (args.length == 3)
          {
  
              String param1 = args[0].toString();
              String param2 = args[1].toString();
              String param3 = args[2].toString();
  
              //Do something
          }
          return Boolean.TRUE; //Always
      }
  
  }
  

  Hope that helps.

• APEX 5 Ajax call via javascript

  People,

  Using APEX 5 with Firefox ESR 38.2 and Oracle 11 g.

  I have a small application in 5 APEX and I try to call a process on demand through apex.server.process within a small JavaScript function in a page.  However, it seems that the code is NOT executed, and I don't see anything on my firebug console...

  What I have is a JavaScript function in the global declaration of a page and function section.  This is the actual function:

  Function myFunction (p_url, p_review_date, p_bsr_tracking_id) {}

  If (! p_review_date)

  {

  var r = confirm ("when you click on 'Ok', you accept que\nvous have read and reviewed the package BSR the\nselected");

  If (r == true) {}

  Alert (p_bsr_tracking_id);

  First update the revision date for the report, for the follow-up of compliance data

  HERE'S THE CALL FOR APPLICATION MODEL

  Apex. Server.Process ("DUMMY"

  , {x 01: p_bsr_tracking_id}

  , {dataType: "text"}

  );

  Alert ("after the Ajax call!")  ;

  Then, open the new window showing the report to display

  var a = window.open (p_url)

  }

  }

  else {}

  Alert ("BSR package has already been discussed");

  }

  }

  Here is a copy of the MODEL application procedure:

  BEGIN

  Logger.log (apex_application.g_x01);

  UPDATE Bsr_Tracking

  SET Date_Reviewed = SYSDATE

  WHERE Bsr_Tracking_Id = apex_application.g_x01;

  COMMIT;

  END;

  Do you see something that could be the cause of NOT work?

  Thank you

  Tony Miller

  Los Alamos, NM

  Patrick,

  Re: Network tab: I see activity on the network or firebug tab...

  Re: Application level process: Yes, it is, does a big difference if it is the application-level or page?

  Question IS... He had a system of authorisation of ' must not be Public user ", therefore, it would not fire, but also I don't have a reply back...

  Thank you for a new set of eyes to see the question, a little...

  Will post question followed on how via the same JavaScript function to refresh the report, he called from the end...

  Thank you

  Tony Miller
  Los Alamos, NM

• Call a Javascript function in a Captivate 7 Web page

  Hello

  I try to call a javascript function in a web page to Captivate 7. The call is an output of blade event. When I saw the (F4) project, I have a prompt that displays a javascript function is called and told me to display in a web page. Of course, which is perfectly logical. However, when I go to the same project in the hml with the necessary Javascript function in page, I get nothing. The script is a simple that displays an alert.

  I made sure the SWF in question is defined in the global security settings. I know that the javascript function is correctly formatted.

  Can someone please give me an example of how to "execute Javascript" call of Captivate to a function residing in the html page please.

  Any help is appreciated.

  Don't just add the SWF file to the Flash security locations overall of confidence.  Add the entire folder containing all the files published, or better still, a level that contains all your published Captivate projects so that you never have to worry about Flash security issues again.

  Also, if it still does not work, I would try the same running JavaScript with a different event than the event output slide.  It can be a little bit reliable.

• Call from JavaScript to AS3 bar reading

  Platform: Captivate 7

  Source: AS3 (obvious, I hope!)

  Output: Flash v10

  I make a unique version of one of the default player bars.  I'm doing the Exit button call a JavaScript function using the following code:

  var btnTipsId = 8;

  function onClicked()

  {

  to import flash.external.ExternalInterface; //Register ExternalInterface

  ExternalInterface.call("saveglobalscore",score) ("closeModule ()"); //Call JS to close Div

  / / parent.onPBCBtnClick ("exit");

  }

  As you can probably see, I don't want to Exit button to close the module with the way she normally does.  My 'closeModule()' function removes a Div layer that hosts the Captivate.  I know it works as we use it in other places.  The problem I encounter is strictly in obtaining the PlayBar to call this JavaScript instead of its function by default 'parent.onPBCBtnClick ("exit");".

  Any ideas?

  Try calling closeModule without the parentheses:

  ExternalInterface.call("saveglobalscore",score) ("closeModule");

• Can LOV check the value in the table and view so absent?

  Hello.
  
  If you have 2 simple tables. One called "Table1", and another table used to fill a LOV called "Table2" can LOV display a list of the missing items in table 1? If so how would that be? Let's say that the LOV table consisted of two fields, a field called 'ID' and a field called 'Document '. The 'Document' field would be the display value and the 'ID' field would be the return value. The first table 'Table 1' would be the value returned by the username returned by V ('APP_USER') and 'ID'.
  
  What would be the SQL to watch 'Table1' and display only the records for V("APP_USER') in the LOV that do not yet exist in 'Table1 '?
  
  Sorry if it sounds simple, but I can't get out.
  
  
  Kind regards
  
  Steve W

  Hi Steve,.

  Steve Welch wrote:
  Sorry if I wasn't clear. Lets say I have 5 documents numbered 1 to 5. The 1,2,3,4,5 and the user that created would be on a line for each. The picture would not infinite because there should be only 5 folders for that user. I can create a query that checks the same number for a user exists in both tables but not it doesn't.

  Looks like that to me, we need to rethink the design of your database. Correct me if I'm wrong...

  Table 1 lists the documents that a user has created, and then you want a LOV to see a list of the documents that the user is still to create. To do this, you need some sort of logic that determines a precise list of the documents that a user must create. This could be done by a table of the required documents and then the list could be created simply by using a set operation, i.e. with a negative statement

  Select annual, required_docs doc_desc
  less
  Select annual, doc_desc from created_docs where created_by =: APP_USER.

  In a well-designed application, it would be a little more sophisticated than that, but I hope you get the idea. As I said earlier, you may need to take a step back and learn a little more about relational database design.

  Concerning
  André

• Call a javascript function in the Value attribute of param

  Hello

  I want to put a TLF text field in the SWF file in an HTML page. So I used flashvar, by calling a javascript function to it attribute "value" as follows.

  < param name = FlashVars value = "" + SetFlashMovieParam() + "" id = "message" / > "

  SetFlashMovieParam() is a javascript like the following function.

  function SetFlashMovieParam() {}

  document.getElementById("message").setAttribute ("value", "msgText = Start");

  }

  Even if this does not work, when I put the text value directly to the 'value' attribute, it worked.

  < param name = FlashVars value = "msgText = here % 20is % 20The % 20text" id = "message" / > "

  I think it's because calling a javascript function syntax error in the param tag. Can anyone help to call this function properly...

  Thank you.

  Normally when you have an executable code embedded in the html code you should check that article accordingly.  In the case of javascript surround you with

• How to call the javascript function in ADF

  I have the javascript function stored in a .js file external (try to reuse in another application). How can call the javascript function for an event of ADF faces component. I need to I am a newbie to ADF, all ideas are appreciated.
  
  Kind regards
  Surya
  
  Published by: sgodavar on Sep 24, 2010 11:44

  Include JavaScript to the jsff/jspx as page:

  Call it like:
  
  Type = "dblClick" / >
  Amit

• Call the javascript function by hovering the mouse over the tab

  Hi all
  I have an application with a level tabs. I want to call a javascript function to the mouseover of the standard tab please help as soon as possible.
  
  Thanks in advance

  Hello

  Go to the page template and scroll the tab Standard attributes. In my current theme which has a line that looks like this...

  #TAB_LABEL##TAB_INLINE_EDIT#
  

  You could change this

  #TAB_LABEL##TAB_INLINE_EDIT#
  

  Or make reference to a function that you included in the header.

  Alternatively, you can make the same change to no current tab.

  Is that what you mean?

  See you soon

  Ben

  Published by: Munky on January 14, 2010 11:34

• How can I convert an incoming call read only an attachment so I can change it?

  How can I convert an incoming call reads only attachment so that I can change it? Save in Word does not it, and find research peut t.

  So, the problem seems to be that attachments are stored as files read-only by Thunderbird and an application it can open without editing privileges, so you cannot change the. Read-only mode was chosen because these files are kept in a temporary location. For example, if you modify and save the back, they are deleted when Thunderbird is closed, so losing your changes. The idea is to force to save you to a different location. You should be able to do it, then open it from that location with full editing capabilities.

  For a permanent change in this behavior, go in the [tools >] Options > advanced > general tab and click on Config Editor there. After you confirm the warning, copy - paste browser.helperApps.deleteTempFileOnExit into the search bar and switch false to true by double clicking on it. Now, saved attachments are created with read/write permissions, but is more removed when Thunderbird is closed (i.e., stored in % AppData%\Local\Temp).