Can my Officejet pro which is USB to my desktop Vista works wirelessly with my computer laptop windows 7?

Similar Questions

• What to do with my computer laptop windows vista which does not start? He gets a screen before before her windows error recovery screen restarts.

  Tittle says it all, I tried safe mode and the rest of them, but I can't start

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer laptop Windows 7 can see the desktop of Windows XP, but cannot ping or you connect

  I've seen hundreds of threads describing problems similar to mine, but none of the suggested fixes worked in my case so I'm starting a new thread.  I bought a new laptop with Windows 7 Home Edition.  My setup before the new laptop was as follows:

  Cable modem router NetGear WGT624v3---> desktop Windows XP Home Edition SP3--->

  I have set up portable Win 7 with the same name of the Office XP Workgroup.  The username and password are the same on both.  File and printer sharing is enabled on both.  The XP desktop laptop Win 7 in the workgroup in my network places.  It can successfully ping the laptop Win 7.  It can access shared folders on the Win 7 machine with no problems.

  My problem is that the connection seems one-sided.  Laptop Win 7 will usually display the XP desktop in the network when Windows Explorer opens.  It still display the XP desktop in the network map in network and sharing Center.  However, I can't map a network drive on the XP desktop by using the name of computer or IP address.  I can't even ping the XP desktop.  But if I start the Office XP in Safe Mode with networking, the Win 7 laptop can ping and access shared folders on the XP desktop computer.

  I tried to disable the firewall on both machines.  I confirmed that the appropriate ports are open for sharing files on both machines.  Safe mode they suggest the problem lies with Windows XP, but I'm running out of things to try.  And the various solutions I've seen in the Strait of similar positions as urban legends.

  Hi Meghmala,

  Thanks for the great tips.  You got me in the right direction.  After configuring my XP machine for a clean boot I have to ping, see and access shared files on desktop XP from Win 7 laptop.  Then, I have considered the services and startup programs that has been disabled for the clean boot.  I found a Cisco VPN service which I had previously used to fix on my office intranet.  I disabled this service and the corresponding to my next selective startup startup file.  I was still able to connect to the computer to Office XP.  I think that the VPN service was the cause of the problem even though I had no open an active VPN session.  Thanks again for this problem.  I tried to solve this problem for weeks.

• the sims 3 can be played on a computer laptop windows 7?

  I really want to get the sims 3, but I don't know if my laptop it works because it's a computer laptop windows 7 which is suppose to not be abe to run the sims 3 I think it's unfair to the people who have it and r real big fans of the sims and can't get the new version! If EA, I think you are mistaken if you didn't not put game 4 da windows 7!

  According to MS, Windows 7 supports the Sims 3: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Sims%203&v=EA&uid=&pf=3&pi=0&s=sims%203&os=32-bit

• I can't open google on my computer laptop windows 7

  I can't open www.google.com or www.google.in on my computer laptop windows 7. I can't open it in Internet Explorer 11 and in the chrome browser too. whenever I try to open it, it always redirects me to a completely different site. and she did the same thing when I log into my gmail account. According to a few suggestions, I tried microsoft's malicious software removal tool and made a few other changes in Control Panel, internet options of Internet Explorer browser but the problem still exists in my laptop.

  How to remove any browser Redirect virus (removal Guide)
  http://malwaretips.com/blogs/remove-browser-redirect-virus/

• I can't find Windows Defender under my services for my computer laptop windows 7.

  * Original title: Windows Defender

  I can't find Windows Defender under my services for my computer laptop windows 7.

  (Moved to repair and recovery)

  Hello

  Windows Defender on Windows 7 is only antispyware. It has disabled (to avoid potential conflicts) during the installation of various programs of anti-malware to include (but not necessarily limited to) AVG, McAfee, MSE and Norton.

  So, probably your antivirus product has disabled Windows Defender. If so, you should not try to turn on WD.

  See you soon,.

  J

• How can I share network between the computer laptop windows 7 into a window of 8 tab?

  How can I share network between the computer laptop windows 7 into a window of 8 tab?

  Hi HollyMcColl,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the issue you are trying to share the computer network between Windows 7 and Windows 8. I will certainly help you in this regard.

  I appreciate if you could help me with more information.

  -Using Windows 8 Surface RT?

  Note: You can create a Windows RT PC home group, but you can join one.

  I suggest you to consult the help articles and check if it helps.

  A Wi - Fi & networking

  http://Windows.Microsoft.com/en-in/Windows-8/HomeGroup#1TC=T1

  Share files on a home network or your Surface

  http://www.Microsoft.com/surface/en-us/support/storage-files-and-folders/share-files-on-a-home-network?LC=1033

  Share files and folders on a network or shared PC

  http://Windows.Microsoft.com/en-us/Windows-8/share-files-folders

  Get back to us if you need further assistance on Windows 8. We will be happy to help you.

• OfficeJet pro 8600: Officejet Pro 8600 Connect USB on Windows 10

  I've recently updated Windows 8.1 to Windows Pro 10. I lost connection to my Officejet Pro 8600. When I try to reinstall using the HP CD, the system does not recognize the USB cable is connected. The cable I use (which came with the printer) is not under any stress, so I don't think the USB cable is defective. How can I fix? Thank you!

  Hi @ThreeofSeven,

  Welcome to the HP forum.

  I understand that you have recently upgraded to Windows 8.1 to Windows Pro 10 and when you try to install using the installation disk supplied with the printer is not recognizing the USB cable. I want to help you with that.

  I would like to start by uninstalling all HP Officejet Pro 8600 previously installed software and drivers.

  1. If your printer is connected to the computer with a USB cable, disconnect the cable from the printer.

  2 Windows search to uninstall a program, and then click the control panel to uninstall a program in the list of results.

  3. in the list of installed programs, click the name of your HP printer, and then click Uninstall or Yes to confirm uninstallation.

  4. follow the on-screen instructions to complete the uninstallation of software.

  5 restart the computer.

  Then, use the HP printer installation wizard to install the latest version of the software and drivers for your printer. Note: wait until you are prompted to connect the USB cable.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• OfficeJet Pro 8500 - no USB or Ethernet cable to connect the printer to the computer?

  I'm just trying to set up my new printer Officejet Pro 8500 Wireless.  I got to the step of installing the software, but there seems to be no cable supplied to connect the printer to my computer.

  I can't currently connect via radio that I expect a new wireless router be delivered.  Is this the way onlt connection other than buying a separate USB or Ethernet cable?

  Help, please.

  Ethernet and USB cables are not usually provided with most of the printers that you need to choose a cable with a length of favourabel to you. You can go to a hardware/computer store and buy a USB A-to-B cable. I'll post a picture of the end of cable just to clear any confusion.

  

• OfficeJet Pro 8630: print usb

  Is it possible to print PDF documents using the USB port on the printer?  When I insert the USB, it seems that offers to print photos.

  Hello

  They are all on the following link:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8630-e-all-in-one-printer-series/5367618/model/5367619/manuals

  Kind regards.

• Officejet Pro 8500 a - USB installation problem

  I can't get my PC to 'see' the 8500.  I can get as far as the USB, but the PC login window does not recognize that I have plug in the USB cable.  I've tried different USB ports on the computer, but it's exactly the same.

  I tried all the suggestions and procedures on the HP site, and the last of them is to go on the forum - I'm here!

  I use XP Pro Service Pack 3, and the printer is 8 hrs old.

  Thanks for your advice, but the problem appeared just to heal, even the next morning.  I gave him another chance, more exasperated than hope and he comes to connect!

• OfficeJet Pro 8500 software USB does move

  I have Windows XP Service Pack 3. I uninstalled all my previous software/drivers HP printer before installing the 8500. (I had a series of OfficeJet 6100).

  I select to install the USB software. The USB cable is not connected.

  When the software starts installation it says "step 1 of 4 - control system. He crashes at 5% and never does anything after that. I let go 20 minutes or more with the same results.

  I have downloaded and run the OfficeJet software and driver removal utility. Who was running. Found a note that says to run the bat file 3 times... Has done this, then restarted. Insert my CD and I tried to reinstall the USB software. Same thing. It hangs at 5% of the audit of the system. I have no case.

  I turned my PCTools Firewall (also unplugged my computer from the internet), then tried to install the USB software with the same result from pending to 5% to ching system.

  Any ideas?  Thank you.

  I had so much trouble getting the software installed. I finally got the drivers running and a lot of software installed, but not all. (No Photo Essentials 3.5 yet). I finished to clear all the memory disk cache (temporary files, etc.) and to change my startup so programs nothing started upward when I rebooted. After that I tried to install again. I tried several times. One of the moments where I tried to install "wireless" instead of USB. I got a ways, then tried to install USB. I finally got to complete the installation. Now when I run the program Center solutions to try to Scan (or other functions) the software crashes and does not end so I can scan etc, but I can click on the icon of the SCANNER that I copied my files of the control panel. When I open the scanner like this, I select Micrsoft camer and scanner Wizard. I am able to scan just fine. It is a continuous process. I think that I have some weird problems with my computer and other files drivers, but at least I can run my printer now and scan.

• OfficeJet Pro 8620: HP Officejet pro 8620 Front USB Port

  Can I use the USB port on the front to connect to a computer?

  Or is it just for flash drives?

  Thank you

  Dean

  Hello
  
  Thank you for using the HP forum.

  The façade is for USB.  Use the rear USB port to connect to the computer.

  Hope that helps.

• HP OfficeJet Pro 8600: How to print on paper of custom format with Officejet Pro 8600 for Windows 10

  Problem: Cannot create a custom for HP Officejet Pro 8600 paper size

  Found a solution for Windows 7, but I need this same problem solved for Windows 10...

  The solution: 'Using pilot Deskjet 9800 to set a custom paper size to print for Officejet 8600' worked very well for me on a Windows 7 machine...

  However, the HP Deskjet 9800 driver is not available for Windows 10... you have another driver I can use that would work with Windows 10 and which is compatible with the HP Officejet Pro 8600... ???

  Hello

  Use the HP Deskjet 6940 as another driver, if it is not listed under HP it appears after clicking the Windows Update button in the Add Printer dialog box:

  1. Right-click your printer 8600 and select printer Ptoperties. A note which port is selected under Ports.
  2. Click Add a printer.
  3. Click on 'the printer that I want isn't listed.
  4. Select A Local port or a netowrk with manual settings.
  5. Select the port used by your printer.
  6. Select HP
  7. Select HP Deskjet 6940
     Note: Click on Windwos update if it is not listed under HP.
  8. Fill the wizrd and 6940 driver allows you to print a document custom formats.

  Kind regards

  Shlomi