can not boot off of the ghosting on T500

Similar Questions

• Windows 10 can not boot after installing the Bootcamp drivers

  I have an iMac late 2013 (21.5 "), and I just got 10 Windows so that I can install it using bootcamp. I spent a good part of two days trying to get Windows to work with installing bootcamp, but no matter what I do, the result is always the same. If I let bootcamp install its driver (as he wants when you start first in 10 Windows after installation), Windows will crash before loading fully at the next startup. He comes to see the windows logo pop up with the loading circle spinning around for a second, until what the circle all the sudden stops. After that, it restarts and I hear the iMac from sounds (this much quieter time for some reason any) and then it does the same thing. The third time that it restarts, it starts the automatic recovery mode and I get caught for the advanced boot menu. After letting Windows reinstall itself, it works fine except that it lacks some of the display driver (I can't adjust the brightness) and I also can not use the function keys on my apple keyboard, or the magic mouse at all.

  I tried to reinstall OS X El Capitan and then repeat the installation for Windows. I tried with the driver OS X Downloads for me in Bootcamp (version 6.0), and I've also tried using those newer that Apple offers for download on their site (Version 5.1.5769). All attempts of the result of facilities Bootcamp in crash of boot even when Windows is restarted.

  Windows is still usable, I just think it would work as it is supposed for a Mac wish. Why the bootcamp drivers break 10 windows? Has anyone else had a similar problem? If so, any suggestions?

  Thank you

  BC 6.x drivers are more recent and recommended for Windows 10 models 2013 and following.

  BC 5.x drivers are older and meant for W7/W8.1. Specifically, in your case, 5.1.5769 are not valid drivers for your model. iMac 21.5 inch 2013 requires such Software in Support of Boot Camp 5.1.5640 indicated in the installation of Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

  Publication date: February 11, 2014

  File size: 925,6 MB

  The system configuration required

  • MacBook Air (11 inches and 13 inches, beginning 2014)
  • MacBook Pro (retina, 13 inch and 15 inch, mid-2014)
  • MacBook Air (11 inches and 13 inches, mid 2013)
  • MacBook Pro (retina, 13 inch and 15 inch, end of 2013)
  • Mac Pro (end 2013)
  • iMac (21.5 inches and 27 inches, end of 2013)
  • Windows 7, Windows 8 and 8.1 of Windows, 64-bit

  It is not a problem of drivers BC. W10 requires updates that it shouldn't. Please see Windows crashing in 10, but know not why. as reference. I suggest that you follow the steps described in the linked discussion and test.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hi titi % 20wright,.

  Please use the link below to Download Adobe Creative Suite 6 applications

  Since you get two activation with a license, once installed you must activate the product using the same serial number. See, https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Let us know if that helps.

• I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do?

  I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do? Is there a place I can call for assistance?

  Contact customer service and ask them to help you.

  Scroll down to still need help?  Click on Contact us.

  Learn how to enable or disable Adobe applications

  Nancy O.

• Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

  Dell Latitude 10 ST2e compressed can not boot from an external optical drive USB (CD/DVD)

  The BIOS has no setting for it. It will boot from a flash drive. I would like to boot from my CD of 2013 Acronis Recovery Console.  Anyone have any success to boot from a CD/DVD USB drive?

  Yes, there is a way to do this.

  I just did this to install Windows 10 from a DVD on a tablet of 10 Latitude by following these steps:
  (Note: my version of BIOS is A08)

  1. turn off the 10 latitude power.
  2. attach a USB hub to the USB slot unique on the side of the tablet.
  3. fix a keyboard and an external USB CD drive to the USB hub.
  4. now press the button down on the side of the Tablet and simultaneously press the power button for 5 seconds (until see you the screen light up, but will be weak against black unlit).
  5. When you see the Dell logo, start typing on the F12 key (the lower right corner shows the option press the F12 key to choose single startup options)
  6. now start choosing appear with many options to choose from, including my CD/DVD drive.

  Hope it will be useful to you.

• Remove the Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive.

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  Hello

  The best way is to clean install and start over.

  In addition, it is not legal to have both installed version that the license is for a single installation.

  If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.

  See you soon.

• can not boot vista, 0xc0000428 error code, help!

  Says Boot Manager: file: \Windows\system32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file.

  can not boot in any mode; memory check indicates OK; the installer showed no error I could recognize. Thank you

  Hello

  a link below how to download and do a vista Startup Repair disk that you then start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• Peripheral 2270Dw HP printer. Toner replaced with unit other than Brother and Toner light will be will not turn off and the unit do not print.

  replaced with Non-frere unit "and" toner light toner unit does not turn off and the printer will not work.  How can I reset?

  Hello

  Do you use the HL-2270DW printer?

  Follow the steps in troubleshooting mentioned in the articles below:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Print the problem - troubleshooting

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faq_list.html?reg=us&c=us&lang=en&prod=hl2270dw_all&cat=112

  If after following the steps of troubleshooting mentioned in the article above the problem persists, I recommend you contact the manufacturer of your printer by clicking on the link

  http://www.brother-USA.com/support/custserv.aspx

  http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/monolaserpri/hl2270dw_all.html?reg=us&c=us&lang=en&prod=hl2270dw_all

  He hopes to help!

• Hard drive crashed and I can not turn off Lightroom

  Hard drive crashed and I can not turn off Lightroom in order to to use on another computer.

  Hi johnr.

  What version of Lightroom do you use?

  If you use the CC version, you can simply install it on any computer (if exceeds the number of activations, you'll be prompted to disable)

  If you are using the standalone version, let us know what version do you use?

  You can also contact us to contact customer service

  Kind regards

  Assani

• I can not turn off Photoshop CS3 on a single computer.

  How can I disable the Photoshop CS3 on a computer that does not 'turn off' in the menu 'help '?

  This might help: Photoshop CS3: Help menu: no option to disable license / 2008-05-04 / SML screenshots | Flickr - Photo Sharing!

• Can not turn off guides 3D (or other), I accidentally turned on CS5

  I'm not yet caught knowledge of 3d elements in Illustrator.  But in some way, I turned on a huge cube 3d 'guide' or something that I can not turn off.

  How do I turn it off?  Any help appreciated - thank you...

  

  View the menu of the view under the Perspective grid. Here you can hide.

  You have probably demonstrated it by clicking on the tool Perspective grid in the tools Panel.

• Why people of Iran can not download or update the application?

  Why people of Iran can not download or update the application?

  What app?

• I've just updated to the latest version and now I can not manually type in the URL. I can't get to a new page if I click on a link.

  I've just updated to the latest version of Firefox 32.0.3 today and now I can not manually type in the URL. I can't get to a new page if I click on a link. I had to use - gasp - Chrome just to get to this help page!

  I tried to restart Firefox.
  I can type (not a keyboard problem), but the browser never tries to go to URL, when I hit enter

  Any ideas?

  Thanks - kept looking around and found a rec to make a reset of Firefox. This seems to have worked.