Can not connect to administer the team

Similar Questions

• Satellite Pro A100: Why can not connect Internet with the net card

  I can't connet Internet whith this net card, but I always connect it with a wireless network card

  Hello

  I put t know why you can not connect to the internet, but we need to study a little.
  Have you checked if the network card has been properly installed? The network adapter appears in Device Manager correctly?

  What do you use to connect to the internet; Modem or router WLAN?
  Have you checked the TCP/IP protocol if the IP address setting has been configured to automatically get?

  Check if there is an active firewall

  As you can see, there are a lot of restrictions and everything must be checked!

• Password just changed an hour ago. I can not connect. Error: "the user profile Service has no logon. Unable to load the user profile.

  Original title: just changed password an hour ago. I can not connect.

  Password just changed an hour ago. I can not connect. I don't have a password reset disk. When I type the password and press ENTER, the next page says ' THE SERVICE PROFILE has NO logon USER. USER PROFILE CANNOT BE LOADED. »

  Hello
   
   
  This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
  
  Try to connect to your computer from another user account and follow the steps listed in the article below.
  Check out the following link and follow the steps to solve the problem:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215
   
  Note: If you do not have any other user account the computer checks to see if you can boot to the desktop insafe mode , and then perform the steps listed.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Tungsten C: can not connect WiFi at the Coffee Shop

  I just bought yesterday and, even with the help of coffeeshop 'experts', I couldn't connect.

  Under "preferences - login ' and under 'Connect to' choose PC, Modem or Local network? Under "via" choose station/cable or infrared?

  Coffeeshop owners know nothing of their router, Verizon set up for them. Apparently I'm the first person who has connection problems. I get a low "linksys" at home and I can't connect with it either.

  Any ideas? Please, I beg you! Thank you.

  The area you are looking at is not for use of Wifi, but for connections of HotSync on your PC.

  I'm not familiar with the operation of the T | C, but you need to find the Wifi client.

  Is this the person you bought the guarantee scheme, that it worked?

  This is a page for support for the C - http://www.palm.com/us/support/wifi/#tungstenc , I noticed that there is a patch available for the device Wifi also.

  WyreNut

  Message relates to: Centro (AT & T)

• New CP - 910 can not connect directly to the Windows 7 computer.

  I try to get my Selphy CP-910, set up and not having luck.

  I try to print using my laptop the printer two ways; direct connect and Wi - Fi via the access point.

  I do the initial installation and when I launch the CD with drivers and follow the directions, I get to the point where the printer is detected and it never gets detected.

  It happens as well with the live mode and mode access point.

  Can anyone help?

  This has been resolved.

  I had to disable my windows firewall and windows defender antivirus.

• Install the HR schema and now I can not connect more hollow the web interface

  Hello
  
  I just ran hr_main.sql success. But now can't more hollow connect web interface of Oracle applications.
  I get this error: "Unable to authenticate the session."
  
  What has gone wrong?
  
  Thanks in advance.

  There is something right more important here. I guess that you are referring to the demo tables included with the database software. Do not these things on an Oracle Applications database.
  the hr_main.sql script removes and recreates a database schema called "HR".
  But Oracle Apps itself also contains a schema called HR that has nothing to do with the demo tables.
  So, when trying to install the demo tables, you destroyed a standard scheme of applications. This is almost certainly the cause of your problem.
  I'm guessing you also a lot of invalid objects now...

  Marc

• BlackBerry smartphones can not connect BB to the laptop... help please!

  Hi, I need help please

  I plugged my BB to lapotp via USB cable... the pop up to connect through the usb mode was on my phone screen but I mistakely selected "don't ask me this question again"... now I can't access my BB info on laptop... iv tried to remove the battery. restart the phone and the laptop, using a different USB port on the laptop & try tp select option don't phone via my computer... no chance with one of them... is there anyone that could help me with this problem?

  Hello and welcome to the community!

  Here's a knockout who treats sequences of menu commands you need to perform:

  • KB13564 How to enable or disable the mode on the smartphone BlackBerry mass storage.

  I hope that it contains something useful!

  Good luck and let us know!

• Can't find the time capsule after changing access timed through iPhone app airport utility (setting: no access between 0130 to 0600). But I can not connect or find the same time capsule in the 0800.

  Cannot find or connect to time capsule after you change the timed access thro iPhone app

  You must have defined it incorrectly... factory reset and start again.

  Give us a screenshot of the settings before you apply them.

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• After that I changed the apple ID password I can not connect to facetime

  After that I changed the apple ID password, I can not connect to facetime

  Update your password for Facetime, too.

• Just send a question to the support site that I can NOT connect on my email account after auto update of 38.3.0, cannot connect to my account to check the issue!

  I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
  How to proceed?

  You can change your email associated with your media profile.
  I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:

  Start T-bird with disabled modules.
  If it works on your module is to blame and you need to activate one by one.

  Start your operating system in safe mode with active network.
  If it works probably your antivirus is blocking or delaying. (Or driver).

• Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

  Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

  Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

• can not connect to my HP Touchsmart. Maybe the wrong password.

  just bought a HP Touchsmart desktop computer. One of my friends came to be implemented and we did the admin username and password. now, I can not connect! I went from values around the thought of my friend may have put numbers in the wrong place and no luck. now, I can't even in the computer. all I see is the login screen. can someone help me please understand where and how I can recover my password?

  Hello

  sandrabermea wrote:

  just bought a HP Touchsmart desktop computer. One of my friends came to be implemented and we did the admin username and password. now, I can not connect! I went from values around the thought of my friend may have put numbers in the wrong place and no luck. now, I can't even in the computer. all I see is the login screen. can someone help me please understand where and how I can recover my password?

  If you have not installed anything, but then it's quite simple. Use the option of reset HP Recovery Managerfactory. That will return that your laptop is purchased condition.

  You can access the recovery at Startup Manager by pressing the F11 key immediately after pressing the power button on your laptop.

  Once you have recovered your laptop be sure to make a password reset disk or flash thumbdrive in Windows and put it somewhere safe.

  Here is a link to 11 other ways to reset the Windows password.

  Best regards
  ERICO