Can not connect to computer

Similar Questions

• WPA - PSK, BEFW11SA, can not connect the computer to the network

  When I enable security wireless mode WPS Pre - Shared Key, algorithm, TKIP, a 9-character key and key group og renewal 3600 and then configure the computer, the computer is not connected to internet, even if the connection is recognized.

  When I created my Linksys BEFW11SA with "Wireless security" disabled, my computer has no problem connecting to the internet.

  Somehow, I'm sure that the problem is related to the configuration of the WPS, but I don't know what to do.

  I run XP sp 3. Router firmware version is 1.50.11, which I think is the last update (1.50.13 in mentioned on the home page of Linksys, but the corresponding version notes give the 1.50.11 version) the router does not have common WPS - PSK option with XP, so I couldn't try to use WPA2 or other options.

  Can someone please help?

  / JanB

  You tried the WPA key on your router and still it dosent work, you tried to secure your network using the WEP password. If it isn't then you can try settings WEP key password on your router and check if you are getting connected to your network on your laptop or not.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Now let's see if you can locate your wireless network and try to connect...

• Need to change the connection information for Windows 8 - can not connect to computer because associate login hotmail account has been deleted

  Long story short - the email address associated with my Windows 8, log in to my desktop computer has been deleted and now I can't connect to my computer at all.  Is it possible to access my computer without having to take my computer to a technician to reinstall Windows 8?  Any help is appreciated, thanks!

  Hello

  I understand that you have removed the Hotmail account and Windows does not let you connect as a result of this deletion. Unfortunately, there is no other way to enter to account without using the password (if the account is active).

  You can see the Microsoft Account self-help recovery article and check.

  Recover your account

  If no help, I would recommend that you post your query in Windows Live ID support for assistance.

• Computer says 4500 G510n is offline, the printer says it can not connect to computer

  I use a Mac OS X 10.5. The printer is recognized as an option for printing on the computer and the printer is properly connected to the wireless network, but the computer will not be printed because he says the printer is offline. Can I have help step by step? Thank you.

  What router?  Have reset you the printing system? :
  
  -Sys Prefs, printing and fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Can not connect to computer after changing passwords

  My son borrowed my computer and changed the user to loggin to the computer account and forgot the password so I'm stuck on how to change the password

  Unfortunately, this being a forum supported by Microsoft, you arrive on the only place on the web where you won't get much help with this problem.  The best we can do is to direct you to the following article (which has useful suggestions).

  "Microsoft's strategy concerning lost or forgotten passwords"
    <>http://support.Microsoft.com/kb/189126 >

  If this is not enough, I encourage you to keep looking for an answer also.

  HTH,
  JW

• WRT54G2 can not connect another computer

  I don't know what I'm doing. I have the router configured on this desktop very well, but he is hooked via the modem to it.  I have also the Wii work through a router very well.  How can I get my other office to connect through the router to get internet connection too?

  Is the desktop computer you want to connect to the router there a wired or wireless. If this is a thread, then you plug the Ethernet cable from your desktop computer to the router and you will be able to go online.

  If your desktop computer is a wireless network, you must locate the "Wireless network connection" icon, it will be in the system tray, right-click on it and select "View available Wireless Network"... Select your wireless network... If your network is secured then it will ask you the security key and click Connect. Once you are connected to your wireless network, open your Web browser on your computer and check if you are online.

• I can not connect my computer laptop 'could not load user profile '.

  Can someone help me pls? My laptop cannot open a session. It gives me this message - "unable to load the user profile.

  I have windows vista and my laptop is Toshiba Satellite.

  It does give me any option on the screen. Can anyone help pls?

  Hello

  You can try to start in safe mode.
  This will automatically use the admin account.
  If it would work then you could create a new user account and could use this new login account.

  See also this MS knowledge base article:

  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215/en-us

  If this doesn't help then you will need to restore the system using the recovery disk ;(

  Good luck

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Windows xp is hijacked, and even in safe mode, I can not connect. My account has been disabled and I am the owner of the computer.

  It seems that someone else took the administrator account and he has rights that replace the mines on the computer.  Try to reinstall windows xp professional, it tells me nothing, but freezes...
  Try to connect to windows on my account, he tells me that my account is disabled.
  Try to connect through safe mode that come no user name.
  Trying to set up the administrator to log on without password, said that the account has been disabled.

  I am trying to reinstall the Windows XP Professional with the disc I have, but with this gel, I can't.
  I am very discouraged and would like this to be resolved.  I'm on another computer write because I can't even connect to the other.
  It won't do anything when trying to go to the last good known either.
  My copy of Microsoft security essentials would be not updated and I had restarted and can't get back in it is saying I had a Trojan horse and he removed twice, but he was still there.  If someone else gets this problem to not restart or you cannot recover.

  Reinstalling Windows can sometimes be a difficult process and most of the time that it is not even necessary to solve most of the problems.

  In case it is necessary to reinstall Windows XP Pro, it is imperative that you back up all your data first. did you?

  In addition, if a system is compromised or broken, a clean install should be made. This means that you must configure your motherboard BIOS to boot from the installation CD (instead of the usual default, which is the hard drive). The way to do this varies according to the brand and model of your PC.

  Assuming that you have the correct CD for your PC, these instructions should work for you:

  http://michaelstevenstech.com/cleanxpinstall.html

  http://michaelstevenstech.com/bios_manufacturer.htm

  If you want to help more away from us, please answer the following questions:

  1. What is the make, model and model number of your PC?

  2. assuming you have Windows XP Pro installed on it, what level SP is in?

  3. you have the XP Pro corresponding correct for her installation CD? In other words, if you have an OEM version, you must use a CD of the OEM version. Here again, a commercial version should work as long as it is not already in use elsewhere. What level of SP is the disc in?

  4. you say that you can not connect to Windows, yet you mention that MSE has given you a message. Please specify.

  Finally, once you're convinced that all your important files are backed up and if you want to try the Windows XP system restore (or other methods) before something as drastic as reinstalling Windows, we can give you advice. And then, if damage malware is really bad, it may not be worth it. But if you want to try, let know us.

• my windows vista computer keep saying the user profile cannot be loaded.and I can not connect with my password. And I need a floppy disc or usb flashdrive.please free help to change password

  I can not connect and it says failed to connect to the profile.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• can not connect because the logon method, you use is not allowed on this computer.

  I have a new computer that is joined to the domain, but in trying to have a user login, I get the following error:

  can not connect because the logon method, you use is not allowed on this computer.

  The only way for him to connect is to change its parameters from the user to the administrator. I tried power users and other options and did not work.

  is there any solution for this?

  Hi Snidera,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

• Can NOT CONNECT to PC RUNNING WINDOWS 8 - only "your PC is offline.". Please sign in with the last password used on this computer. »

  I'm so angry. I did everything and I can't connect my new pc Windows 8! I live in New Jersey and set up my network connection there, but I'm going to school in California (where I don't had not set up a connection without wire/local). I have configured my pc via a microsoft account and now it does not allow me to log in because I am not connected to the internet and can not connect to the internet. I can not update/use command prompt to connect to the wifi/etc. because all actions require my password. I even tried to use an Ethernet cable. Nothing works! He always says "your PC is offline.". Please sign in with the last password used on this computer. "I HAVE NOT CHANGED MY PASSWORD! and my account has not been hacked. This problem is simply my inability to connect to the internet. It's BS. Microsoft, you better come up with a fix for this young! If anyone has found a solution to this problem, please answer! I have very important files/software that I can't simply delete. This bug is much too big for Microsoft to miss and should be fixed immediately. How am I supposed to use this PC for school?

  But... In order to implement a local account, you must first connect to the Microsoft account that brings back us to the same error.  I had this problem as well and he needs to be addressed.  Whenever you walk away a network before installation on your PC/laptop, you will have this problem.  Try this... turn off PC/laptop, then go to another computer and sign in to Microsoft Web site account.  Connect with an Ethernet cable and turn on your PC/laptop with the connection problem and try to connect again.  It should work.

• I can not connect to my computer laptop get "the Group Policy client service has no connection. Access denied. "

  I can not connect on my lapto even if the password is correct. I'm getting "the political group Clinet impossible service connection access Denined.

  Original title: I can not connect on my laptop even if the password is correct

  HI, John Angelo2,.

  Try rebooting and tapping F10 to achieve the recovery screen

  You can choose to repair or restore your system

  Select Restore to an earlier time

  If it is impossible to do the above, use the installation start screen repair DVD

  This problem is caused by your user profile/registry settings/system files corruption

  Response of Mouneshawar R.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-Group-Policy-client-service-failed-the-logon/6b069a74-8524-442c-8ff1-d723e2a4e992

  Re-create the profile or restore the file ntuser.dat from the back to the top

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/c88515b4-4be7-4f6f-9988-80f8a5683b41/

  You can post on the Technet forum for help

  How to customize the default local user profile when you prepare an image of Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/973289

  Assign a mandatory user profile

  http://TechNet.Microsoft.com/en-us/library/cc786301 (WS.10) .aspx

  http://support.Microsoft.com/kb/307800

  http://msdn.Microsoft.com/en-us/library/bb776895 (v = vs. 85) .aspx

• Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

  Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

  Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

• I can not connect to Macbook Pro iCloud

  Hello!

  I have a problem with access to iCloud on my MBP (15 inch, mid-2015) OS X EL Capitan. I can not connect on App Store to make purchases and get apps, iTunes, Messages and iCloud in system preferences. When I try to open a session, apps just freeze and nothing happens, then I have to force quit. I googled many solutions, but no one has helped me.

  

  You must remove the serial number of your computer from your profile.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.