Can not control Toshiba recovery disks

Hello

Wonder if anyone can help, does in my head.

Been trying recovery disc Toshiba order for the last two days, without success, I can't past the billing page, I entered my details, including credit card details, press on confirm and I just get the same page, showing, without anything to show me what the problem is.

If I use the pre-paid option I can complete the order, but with that, I do a bank transfer which will cost me, and I didn't do that.

Any ideas on what could go wrong?

Hello

I guess there is something wrong with your credit card number, who knows
I recommend contacting the support of Arvato.
Choose your country and your language on the pre-order disk recovery page and click on print (can be found at the bottom of the page)

There you should find the details of area and contact Support.

Tags: Toshiba

Similar Questions

  • computer can not find the recovery disk

    I have a notebook G72-B54NR, I had my computer reset.  When I tried to reinstall windows 7 with the 2 recovery discs, I get a message saying that this computer has not detected a recovery disk.  Thank you.

    Are you at the end of the process here:

    http://support.HP.com/us-en/document/c01867418

  • Satellite C660-121 can not verify the recovery disk

    I bought a couple of days a go a new Satellite C660-121. Today, I went to do the recovery disks, but it fails to check the first DVD disc.
    The error I get is the following
    http://img231.imageshack.us/i/failedcopy.PNG/

    E:\ is the name of the DVD player. I use Verbatim DVD - R blank, I have the laptop on the power during the burning process and I tried twice with two different disks and got the same result. How can I solve this problem?

    Hello Voger

    I have created many recovery on several Toshiba laptops DVDs and never noticed anything like that. I used that brands and DVD-R discs were Verbatim or TDK.

    Unfortunately I can't answer it what does this message mean, but you should try to repeat the creation of DVD. If possible try with TDK.
    If the same thing happens again I recommend you recovery your laptop using recovery of HARD drive option and try to create discs of recovery again.

    Sorry, but I don't see any other possibility at the moment.

  • With FileVault and Firmware Lock-> can not see the recovery disk

    I see with FileVault and Firmware now on lock is no longer the recovery disk in the Boot Manager. If it's supposed to happen? I am running the latest version of El Capitan.

    Yes, what is expected. You can always "see" from a Terminal of diskutil list or list cs disktuil order. Thus, instead of having 2 ways to access (command + R, Startup Manager - Option/Alt key) there is 1 way that is command-R.

  • (Redirected) Can not produce the recovery disk

    When I place a 16g flash DRIVE in my Inspiron 3847 I get 'We cannot create the recovery disk', and 'a problem occurred... ". "

    It's a nine own Toshiba player.

    I'm on Windows 10 and happy with it.

    What should I do?

    Best of this post in the forum Windows 10 here:

    http://en.community.Dell.com/support-forums/software-OS/f/4997

    Bev.

  • Portege A100: where can I get the recovery disk?

    Anyone know where I can get the recovery for my portege a100 disc as my one was lost in a recent move of House as well as all my other software.
    any help would be received with gratitude

    Hello

    You can order the Toshiba recovery disks in the Toshiba authorized service partner in your country.
    Before posting questions, you should use the advanced search for similar topics. This similar issue was published a long time here in the forum

    Cordially ;)

  • I have not received a Toshiba Recovery disk

    Hello

    I did not receive a recovery disk toshiba that I need right now

    can someone give me options to help me solve this problem, I need to do this since I need to study and I need a disk to reboot now

    Please you guys can help me

    Thank you

    feel free to post if you have any ideas

    Hi mate

    Books do not come with recovery disks.
    You must create the clean disk with pre-installed tool called Toshiba Recovery Disk Creator.

    In the worst case you can also order one from here:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Re: Satellite A300-1MO - can I use any Toshiba Recovery disk?

    I have an A300-1 MB.
    Can I use any Toshiba Recovery disk?
    Or is it as a specific for my A300-1 MB?

    I'm like a total noob...
    Someone pls help...!

    No, you cannot use any recovery disk, you must use the recovery disc designed for this model of laptop.
    The point is that recovery disk contains an image. The image is a package that contains the OS and Toshiba drivers
    If you want to use another recovery disc then the image would be installed with no compatible drivers and this could lead to other problems

    Every new notebook from Toshiba offers a Toshiba Recovery disk creator tool. This tool can create a recovery disk

  • 'Operating system not found', can't the recovery partition, do not have a recovery disk

    Original title: recovery Partition not here and not backed up copy of Win8

    I have an 18 month, Acer Aspire V5-571pg now out of warranty.  For the last 3 days, of what it has been in a loop bringing repair until this morning disc error messages, it just says "operating system not found '.  A call to Acer support and we have tried to activate the recovery Partition using Alt - F10 but it seems that the partition is not there either, and of course I did not create a recovery disk when I got the laptop.  I was not eager to send the Acer laptop for service after the warranty expires, I thought I should at least attempt of recovery or re - install.  Windows 8 is a preinstalled OEM version.  Where should I start?  Y at - he's going to be a download that I can use and what I need to know a product key to install?  Should I get Acer to send me a recovery disk?  Not super PC here but am knowledge letter wins all the time.  I hope someone understands my situation.  Thank you

    You can order the recovery media using your SNID, from the link below. I have an ACER desktop computer, and it cost me less than US$ 20.00, to order an additional series.

    eRecovery Media

    http://store.Acer.com/store/aceramer/en_US/eRecovery

  • After upgrade to Windows 7 can I use Toshiba recovery disc creator?

    Hello

    I just upgraded my Toshiba Satellite L550-130 from Vista to Windows 7. The Toshiba recovery disc creator, which is always installed also works for Windows 7?
    Then, I'll go and buy some blank DVDs...

    Thank you and grettings,
    Toni

    Hey mate,

    I doubt it will work. I mean, after the installation of Windows 7, there is not image files that you can burn on the recovery disk. So it does not work in my opinon.

    If n t believe you, just try and post your results here! Blank DVD is really cheap ;)

  • Where to order the Toshiba Recovery disk?

    Hello

    Basically, I need to reinstall my Windows Vista bought as a new drive HARD and obviously have no the recovery for my windows vista disk. Reflected on the Toshiba Media Recovery but can not use because I bought my laptop in Australia, so my serial number is not recognized.

    Please help me solve this long-standing problem.

    Rory

    Hello

    I think that in this case you cannot use a normal Microsoft disc or contact you a service provider in Australia. Maybe they can send you a recovery disk in your current country.

    As I have already said in the worst case you will need to use a Microsoft disc, then download and install all drivers at Toshiba page. Then, you have factory settings too backward.

  • Equium P200 1IR - where can I get a recovery disk for?

    I'm having difficulty to recover my laptop girlfriends, he has start problems and Startup Repair did not resolve the situation.

    I've managed to remove the drive and save all important files and photos.
    However, I don't have a disc of recovery for her and she is the other side of the world right now.

    Any ideas where I can get the recovery software from?

    Thanks in advance.

    Carl

    Hello

    Hmm you know this page from Toshiba Recovery disk drive?
    https://backupmedia.Toshiba.EU/landing.aspx

    Maybe you can order the CD it

  • Equium P300-P6T - where to get a Toshiba Recovery disk?

    Crash fatal hard drive in the RECOVERY PARTITION! Bought antiques and did not have the recovery disks.

    Can someone point me in the right direction for discs to buy/acquire/download recovery Equium P300-P6T?

    Hey,.

    Nice to hear that you got second hand Satellite P300 and welcome in the forum!

    Back to your problem:
    You can order online a Toshiba Recovery disk. It s not free but it of the best way to restore the factory with Windows, and all drivers/Tools settings. Everything will work because you get pre-tested this installation.

    You can order it here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Install Vista Home Premium Toshiba Recovery disk

    Hello

    I question: is it possible to install Vista recovery disk without erase all data on the HARD drive and destroy the current configuration partition?

    Question II: Is it possible to to somehow 'get' the installation of Vista from Toshiba recovery disc files,
    integrate em with SP1 and train a separate Vista installation disc?

    Question III: How much space do you think I should spare for the primary partition for Vista OS only (file and all the other software will be on other partitions)?

    (1) No, it is not possible to install Vista from the Toshiba Recovery disk without format the whole HARD drive.
    You can only use the HARD drive recovery feature if you don t want to erase the whole HARD drive. Then only the first partition is erased.

    (2) No, this is not possible. The recovery disk contains factory settings in an image and you can change something. You must install SP1 after installing Windows.

    (3) you must use the 15 or 20 GB for the system partition, but if you reinstall Vista, you reinstall all of the programs. So you can install all the programs on the first partition.
    Here is a useful article on the Vista partition Manager:
    http://195.182.196.33/KB0/TSB7101OB0006R01.htm

  • Can not access the recovery on M30 partition

    Hi all

    I use a Toshiba M30. Last week, I uninstalled the old version of Norton Antivus to install the new version of Norton Internet Security. After you have uninstalled the NA, I found that my phone does not work normally. I, therefore, formated C pilot. Then, I could not access the recovery partition to reinstall the OS.

    How can I solve this problem?

    Thank you very much.

    CUONG

    Could you please be a little more clear on the problem.

    You try to use the recovery CD? Why did you format drive C? When you say that you can not access the recovery partition, how are you trying to access? through BACK.

    Sorry, but your question isn't very clear and a bit confusing. Thank you very much

Maybe you are looking for

  • How to remove the curve only automatism

    I have several automation on a single track. In previous versions of GB you may add/remove individual automation curves. In v10 there is only the possibility of 'Delete all the automations on selected Track' which is excessive. All solutions?

  • its DTS

    I have a HP Pavilion n221sa-15 Notebook PC but I can´t find the software of its DTS to windows 7 64 bit. Is there anywhere I can go to download? Thank you

  • Lost recovery DVDs my A200 Satelite

    Hello I am owner of laptop Toshiba Satellite A200 and I accidantly broke my recovery CD... I have not all backups. He simply snapped in my bag. What should I do? I need to recover my system, my laptop is not operational right now.My computer Windows

  • The icons on my desktop have been transformed into icons adobe.

    My computer invite you and recommend you to install Adobe Reader 10. I am currently using version 9.  I downloaded the version 10 X a few weeks ago and after that I downloaded it, all the icons on my desktop have been converted to adobe icons. I had

  • How to generate a pulse signal?

    Hello I'm relatively new to LabVIEW and I need to generate an impulse (Dirac function) in the motor continuous. At the same time, I need to be able to change the pulse width. I am currently using LabVIEW 7.1.