Can not install my new HP All In One printer

Similar Questions

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Can not scan using Savin 8045 All In One printer/copier/scanner

  Original title - scanning problems

  I connected a Savin 8045 All In One printer/copier/scanner of my Dell Vostro 470 computer via a cat 5 cable and router. It prints wireless and locally but not scan.

  Hi TomMargiot,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. do you receive any error messages?

  I suggest you to uninstall all in a printer\scanner\copier and install it again and check if it helps.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  If the problem persists, I suggest you to contact the Savin Support for assistance.

  http://www.Savin.com/global/support.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Can not install the new update

  Hi, I use windows 8.1.

  My Skype cannot be used at present. Pop message 'the old Skype 7.8 version can not be delete' while I install the new version by the message on Skype application.

  I got through all the files and make sure you all relate file has been remove. But I can not install the new version. How can I update the window to desktop?

  Thank you

  Run the following program to remove traces of Skype from your system, which should allow you to reinstall the program:

  http://www.pcdust.com/downloads/SRT/SRT.exe

• 2 Facer function not installed on my J6480 all in one.

  2 Facer function not installed on my J6480 all in one.  How to install this feature.  Using Windows 7

  You have physically attached duplex unit, but it does not appear in the pilot?  In this case, check the duplexer as described in the Vista/Win 7 Duplex Printing solutions to the problems here.

• Cannot install HP Photosmart C6380 all-in-One Printer

  Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

  None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

  Hello

  1. who is the operating system installed on the computer?
  2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
  3. do you get an error message when you try to install the driver?
  4. what all troubleshooting have you tried?

  If you use Windows 7, follow these methods.

  Method 1: You can also run the fixit of material.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: in the Windows printer problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For more information, see these articles:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
   
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Please provide us with more information on question help you also.

• How can I get my HP F380 all-in-one printer scanner, copier control with Vista

  F380 working with Windows xp in all modes, but now it just prints and gives me no control other aspects of the copier of analysis and control, because I loaded Windows Vista.

  Hello

  Follow the steps below and check if it helps.

  Method 1: I suggest you download the drivers from the website of HP support- Driver & Software Downloads - all-in-one printer, HP Deskjet F380.

  Method 2: Run the printer Troubleshooter and then check if that helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• Can not install the HP drivers for laserjet 1022 printer on my new computer with Windows 7.

  I have a laserjet 1022.  I can't install the HP drivers supplied on the site of HP on my new computer.  When he asks me to connect the printer, the printer is recognized, but the message still say waiting for the connection.  I tried the advice on the forum by HP and others, including the loading of drivers from other countries.  Other attempts at downloading drivers ends with a message saying that the download could not be completed.  I tried other USB cables and it does not work.  I love HP product but I really need help on this one.  Help!

  Kind regards

  Day Trader

  Hello DayTrader,

  When you connect the printer and the message goes on to say "Waiting for Connection", please try the step below...

  • Go to Device Manager, (do so, right click on the computer icon, select Manage from the left pance m click on Device Manager, which will display the Device Manager on the right pane).
  • There should be entries yellow bang (yellow! brand) with the name of the printer on it.
  • Right-click on each one and select put to update driver.

  • Choose "Browse my computer for driver software".
    Click the Browse button to point to the CD (if you use the CD to start the installation) otherwise copy the path where the drivers were extracted if you downloaded it. It will usually be in the folder with the name of departure 7z... under the TEMP folder.
    Then click on Next button.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!

• I can not install the new version of lightroom cc

  I'm trying to update lightroom lightroom 5 cc new version through cloud adobe creative and only gives me the option to install.

  When I run install adobe creative cloud tells me that is installed but can not find this on my computer and still the version 5 installed.

  If the installation was successful, you should have 2 Adobe Lightroom CC version (2015) and Adobe Lightroom 5.x - you will need to uninstall Adobe 5.x to remove it.

  Windows Adobe Lightroom CC appears just as Adobe Lightroom, while the LR Adobe 5.x displays the version number in the list of the app.

• can not install the updates to all the

  I reset my computer to the settings factoruy and reinstalled everything with a ram upgrade and now I can not get windows to download updates.

  I reset my computer to the settings factoruy and reinstalled everything with a ram upgrade and now I can not get windows to download updates.

  Did you manually install SP2 and SP3 first?

  Refer to this post similar to yours:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

• No can not mi more HP Deskjet all-in-One 4315 printed desde otros hence, solo print desde el ordenador al than esta conectada por cable.

  Buenas tardes, tengo cuatro hence y una Patrick en casa. Ellos esta conectado UNO has more por cable y los otros estan por medios inhalambricos online very. Desde estos very're realize the connection, miro imposible to me if needed controllers pero no none appears. Sigo el paso of ir a Panel of Control, printers usually y miro Fax y las printers are instaladas. Mirar the conexion of mi more pero intento no conectarlo can me appears a donde cuadro don't dice that none is you can set the connection. No Hago el problemas Solucionador click nada detecta. He comprobado Los cables esten well connected y paso el cada back por very reliable antivirus, porque me dijo el Técnico could harm por algun virus o hacker than the conexion bloqueando este estar has more o a los drivers. Not se why going asi, el ano pasado instaled las printers y no tuve any problema. Encima in uno los hence desinstale more than I need por cambios deshacer lo, desinstalar y volver a instalar el ordenador para ver algun modo, pero fue peor, porque habia if service Patrick desde ese ordenador no can not. If alguien conoce este problema agradeceria mucho knew ayuda.

  Oh for more information one of the hence are XP, Vista otro y otro 7. El unico computer that works well with the more're UN Windows XP.

  MUCHAS gracias

  Look in the upper right of this window.

  

  Where we see English, click on it and select your language from the list.

  

• my new F4500 all-in-one print and scan, does not copies

  It does not... for me... I have 66 years... paid support with HP and they can not help me with the printer...

  Hi cookified,

  Follow the steps below and let me know if you are able to make a copy.

  1 place original on the scanner glass

  2. press the black start copy button.

• Problem network with new 8500 all-in-one print

  I installed a new Officejet pro 8500 has more on my network.  I have 3 computers on the network set up this way: DSL modum connected to Linksys router, all 3 computers connected to the router, PRINTER is connected to the COMPUTER main and other 2 computers print via the main computer.

  I installed the printer sucessfully and run the HP Network Assistant after the connection via another computer dialog boxes.  I can print and fax very well from the main computer, but not on other computers.  I set up the printer as a 'shared' on the main computer and other computers recognize the printer and set it as default printer.  But when I try to print form other computers, nothing happens.  When I go into the properties of the control panel - printers - ports on the main computer, the printer is listed as USB002 but when I click on "Set up" I get "an error occurred during port configuration.  This operation is not supported.

  Main computer is running Windows Vista with current updates

  Other computers running Windows XP SP2 with updates.

  Any ideas?

  Thanks, Jim

  Problem solved: some how the "printer offline" option was checked.  Once I unchecked everything works.  I can't for the life of understand me how this has verified in the first place.

• Install the HP Photosmart all-in-One printer-D110a malfunction

  I can not the printer HP D110A properly uninstall or reinstall on my computer.  I have a desktop HP Pavilion with Windows 7 64 bit with an Intel Core processor.

  I went through many suggestions on the HP support site, more than once, and the installation failed every time with the message "the system cannot find the file specified."  This message is displayed if I install more software HP Photosmart and pilot or just the HP Photosmart basic drivers.  I went to Control Panel programs and features and uninstalled all HP without change.  I also deleted temporary files and folders without change.

  Once that occurs, I hit very well and it sends a report to HP and shows me an error situation code: 32438568.  The program starts then uninstall points, but - error after a few minutes with the message "HP Installer uninstaller has stopped working".  In the background grey, I can see its order to step 9/11, to the location of the progress of the installation of Software\Microsoft\Active.

  I also tried the HP printer program and searched the forum without success help files.  Please help, I want to just install my printer.

  Problem solved!  Here's what I did to get the printer D110a Photosmart software and drivers installed.

  1 - Download the full version of the software on the HP site.  Do not choose the version of the base drivers.  We will remove unnecessary items in another step.

  2 turn off your antivirus, antispyware, and firewall.  Make sure that you disable all of them.

  3 disable startup: click on the Windows icon in the system tray, type msconfig in the search field and click Enter.  Choose "Selective startup" and uncheck "Load Startup items".  Click 'Apply' and then 'OK '.

  4 restart your computer.

  5 - Disconnect the USB cable from the computer.

  6 - click on the file of the software that you downloaded.  During installation, you will arrive at a screen of welcome from HP with several buttons.  Click on "install".  In the next screen, there are 3 or 4 links.  Click on one, titled, 'Software' or 'select software.  Uncheck the print smart Web, HP Photo Creations and Customer Participation program.  (You will be able to install it later if you wish.  Now we want to simply get the print, scan, and copy functions work).

  7 - proceed with the installation.  Connect the USB cable when prompted.  If you can, test by making an impression and then a scan.

  8. remember to go back to msconfig and check 'Normal Startup'.  Then click 'Apply' and 'OK '.

  9. turn your firewall, antivirus and antispyware programs turn it back on.

  It was the only thing that worked for me.  I found a large number of these instructions in separate solutions of HP and help articles, but I had to put it all together to get the software and drivers to install correctly.  I hope this helps someone.

• My Mac does not recognize my PSC 1610 all-in-one printer.

  All of a sudden my mac does not recognize my 1610 printer all-in-one.  I think it may have something to do with the system 10.8.2 upgrade but I'm not sure.  I followed the instructions and uninstalled and reinstalled the software.  Software update does not seem to think that miss me anything, no update is listed.  Nothing has changed other that the OS and I use this computer and the printer for 3 years.  No printer appears in the list of system preferences.  Error when I try to print is 'not connected printer.

  Hi beaumast,

  Have you tried using a USB cable?

  If you tried it on your friends computer and got the same experience there is a possibility that the USB port on the printer has malfunctioned. Here are some links that you may find interesting if you consider upgrading your printer.

  HP trade-in program

  Current for sale Photosmart printers

  HP out of warranty of the Support Options for selection of printers HP