Can satellite P300 - I create a RAID with 2 HARD drives?

Similar Questions

• Can Satellite Pro L300-22N - I use a SATA hard drive?

  Hi all!

  My hard drive is broken. Now, I want to put a new one in it. I have a SATA hard drive, but I can put it in this laptop? Because the old one was an ATA (I guess)

  Thank you very much!

  Hello

  I can confirm the info given by Liam.
  The L300 supports the SATA interface and you use the SATA 2.5 HARD disk

• Raid PowerEdge r.620 with single hard drive controller

  Hi all

  I have Dell PowerEdge r.620 with 1 * 1 TB hard drive, Raid Controller using mini H710... When I try to install Win Server 2008/R2 x 64 the HDD is not detecting, I've read in this forum of the disc cause hard does not detect is pilot raid is not installed, but I don't have that single hard drive is possible to set up raid with single hard drive or I don't have to use raid controller but I still don't understand how to set up the server with no raid...

  Thank you...

  Dimm21

  Sorry for the late reply, do you mean raid controller in the server? If you want to say, I always do not install driver coz is new server than i've got...

  I want to know, if posibble install raid on one hard drive and how to configure who... Server raid controller is mini H710

  Thanks for your response

  Yes, the RAID controller.  One you have?  I'll assume a PERC H710 for now:

  The H710 PERC is NOT compatible non-RAID (you cannot use a single disk without RAID)... in order to use a hard drive, you MUST configure a single drive RAID 0.  This must be done in the RAID controller BIOS utility, accessed by pressing CTRL-R during POST when prompted.

  Once configured, you need TO load the driver for the operating system, see the drives connected to the controller.

  If you have a H310, it SUPPORTS no RAID, so you do not have to configure anything in the RAID controller BIOS, HOWEVER, you MUST always load the RAID controller driver during installation.

• Can satellite P300-20R - I use the latest drivers from site Web AMD/ATI?

  I got a Satellite P300-20R now I want to update the video card drivers - ATi HD4650.

  Can I use the latest Catalyst for the mobility card that I find on the AMD/ATi website, and what is the procedure?

  Toshiba drivers are tested and adapted for certain graphics cards. Driver Toshiba will not force the graphics card to run the highest level and therefore protect laptop from overheating.

  On my Satellite P300, I use Windows 7 32 bit and driver Toshiba. It runs stabile and I'm happy with it.

  To be honest I don t want to use ATI driver and unfortunately cannot give you an answer to your question.

  Can you please tell us which of operating system you are using and what version of driver you want to install?

• How can satellite A300D-125 - I activate RAID?

  We all know that our series equipped with two hard drive connectors. I installed the two 320 GB Toshiba HDD (same model).
  But there is no RAID option on the configuration of the BIOS. (I know)

  Is it possible that I have this hardware raid-0?
  Any expert please let me know.

  As I heard this software raid have no information about it.
  If hardware raid is not possible that we have implemented a raid 0 software on this unit.
  If possible, what are advantages and disadvantages. It is effective as hardware raid?
  and can our system handle this?

• Satellite Pro 480CDT does not start with mounted HARD disk?

  Hello
  I have tried several disks in my Satellite Pro 480CDT, but none of them starts. The screen stays black and the power led blinks orange (long, short, short, short, short, long, short, short). If I drive the machine past the on-screen "In Touch With tomorrow, TOSHIBA. He sees Windows CD-ROM or a floppy disk. I tried with 6 hard drives all below to 6 GB and AFAIK the work. I tried with another 480CDT a 220CS and a 2140CDS. Surely all hard drives and computers laptops have the same flaw? What I need to update BIOS or something as none of the drives are original for the machines.
  Help, please!
  Thank you

  John.

  Hi John

  I'm afraid of nothing that you can do everything alone. When the electronic power supply detects a power problem, it sends the hex code. In this case you should contact the technicians. They can read this code and will know what the problem is here.

  Just FYI: I discovered this disc HARD original for this unit has the P000244000 part number. Maybe it will help you get another HARD drive for testing.

  Sorry I can't tell you more info on this good old classic.

• Dimension E310 with RAID controller bad hard drive or bad

  I have an E310 with DataSafe (two disks Seagate 160 GB in RAID 1).  The other day, the RAID software reported a failed drive.  Left as is one night or more.  The next morning, the machine has rebooted with no hard drive found.  The stop for the rest of the day.  That night that he started Windows, software RAID said two discs have been very well and tried to rebuild the mirror.  Suspended kept Windows and blue screening. From one of the drives and rebooted.  Now running a week on a single disc without any problems.  So, I lucky and pull the bad drive which can't seem to see the software RAID is bad?  Or the software RAID controller might be malfunctioning and having only a drive he will not RAID so no problems?  Don't want to waste money on replacement disks if the controller is the problem.  Would appreciate suggestions on how best to diagnose.

  
  

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• Satellite A20-S103 - crackling noise with new HARD drive

  Hello together

  I upgraded my laptop A20-S103 with a hard drive Western Digital WD2500BEVE 250 GB running under Windows XP Pro.
  Since then, I have problems with the sound and the movement of the mouse when the CPU usage is high.

  Up to 50% of its use, works well but before I crack and mouse sticks and made jumping movements.
  The BIOS and drivers are updated to the latest versions of Toshiba online.
  After awhile and a lot of research, I got also the HDD running in DMA mode with the IDE4008.exe ALI tool isn't that hard drive is running in PIO mode.

  In addition, I think that the speed of the hard drive is low when the CPU usage is high.

  Please also read http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=89990𕾆 that is showing that I'm not the only one with this problem.

  Anyone know a solution?

  I agree with Akuma. You should try to update the BIOS and drivers from the chipset and see if it works or not.
  It's worth to try ;)

  The two you can find here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  My drive hard mac failed and I got a new drive to come. I save the news a few weeks before the accident with time machine.

  Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  Hello

  Transfer of the installed application would not work properly.

  I advise you to install the application again.

  Kind regards

  Sheena

• Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number.

  Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?

  Hi Uri,

  Please click on the link below and contact the Adobe Support via chat.

  Contact the customer service

  Hope this will help you.

  Kind regards

  Hervé Khare

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• I bought 5 Lightroom to download from a disc. How can I download it on a laptop with no disc drive?

  I bought 5 Lightroom to download from a disc. How can I download it on a laptop with no disc drive?

  Hi Tully,

  Please visit:http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html

  Don't forget to follow the very important Instruction.

  I hope this helps.

  Concerning

  Megha Rawat

• I can never make a lot of space in my hard drive after back to the top

  I regularly save on a hard disk that is attached to Lightroom.  What I've noticed, is the amount of space that I have left is still declining.  After the backup, I used to have over 200 GB of the available MBP 768 GB retina, now, I rarely more than 100 GB.  At some point I'll have no space left at all.  I don't know that I'm doing things correctly.  I noticed that there are duplicate files when I export the. DNG my 645Z or. My A7RII ARW.  So I file raw in LR, the ARW and the .xmp that have been exported (I still name them).  My habit of the end to create more space on my hard drive is to find the .dng and .arw files in the finder, back up to an external hard drive and then remove them from my MBP.  I do not touch other files not named.  What I find good is that even with the hard drive attached, some files are displayed as missing picture.  I can remedy this with a cover of Time Machine, I did a time machine to the top until I backed up (something I always do) images in lightroom.

  Could someone tell me what I am doing wrong?  What is the best way to ensure that I have a lot of space?  I can't just buy new laptops all the time when I run out of space.  I save most of my images finished PSCC at the highest quality jpg, so the finished images that are not take total amount of space, but these are not archived on LR that I prefer to use the tag system which uses Mac.

  The best approach I've found is always import as of the segregation of records to your home. Make sure that these are backed up by time machine or another mechanism for backup and then if you are not actively using the images in a dated file more copy set in an external hard drive where you keep the same year and the date structure separated. Then in Lightroom, it is a simple case of right (or control), click the folder that you moved in the sidebar of library and select "update folder location" and that it points to the new location of the folder on the external drive. All your images must be accessible as long as external is attached. Now you can remove the folder from your internal hard drive and find space (don't forget to empty the trash).

  My main machine is a retina with a 256 GB drive and I easily maintain a 100 of 1000 image catalog Lightroom on it in addition to Photoshop and many other CC software I use (first for most). Most of my images and video life on a large RAID array, but my most recent images months living inside. Easily, you should be able to work with a 768 GB internal. You delete old backups of catalog in Lightroom? By default, Lightroom creates backups of the catalogues that makes every week or so next to the file catalog in a folder "Backups". You don't need to keep a large number of these backups autour. I usually keep only 2 or 3.

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.