Can't at Internet 2008 VM Server Instance
Hello
I just created a Workstation 8 virtual machine and installed Server 2008 as the operating system. I can not get Internet browser Internet Explorer. I disabled THE SEC, but it has no effect.
I was hoping someone can help me diagnose my problem and may recommend how to solve. Thanks for any answer!
Need us more information to be able to reply to all.
(1) what is the OS WS 8 is installed on the - what (seems likely in your case) Windows or Linux.
(2) physical NIC yo card use to connect to the Internet on the hostt machine.
(3) how you created the window 2008 Server. Easy install Cutom install, install the BONE later and which is default NAT or bridged network. Maybe the rest of the sheet creation of virtual machine. Default networking is NAT - migh want to change this to open and see if you're lucky - it would work by itself. If this is not the case, the details of phases 1 and 2. Ulplaod the vmware.log can. Other people wil lhave more suggerstions the more information you provide. Suffice it to say that something does not work is not enough.
Tags: VMware
Similar Questions
-
Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?
I have a PowerEdge 2850 server, that when he was initially put in place (by someone else) had Windows 2003 R2 top. However, when they put in place, the partitioned the C: drive with so little space that it is running out of space. We got a newer Dell server and I turned that 2850 off the coast. It was interrupted for a month or two.
But I would like to use it as a backup of database server. Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?
You need to install RAID drivers during the installation of 2008R2.
- Configure and initialize the RAID in the CTRL-M utility.
- Download and extract the drivers put on USB (or CD).
- Start on media 2008R2.
- On the screen that asks you where you want to install Windows, click on load a driver link at the bottom left.
- Navigate to the location of the RAID drivers.
- Choose the drive to install, then install.
-
Can I use license 2008 Windows Server 2008 R2?
I have Windows Server 2008 Standard license, can I use it in Windows Server 2008 R2 Standard Edition?
and it's my Windows 2008 CAL would be valid if using windows server 2008 R2?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Can deploy B2B &; B2C in a Server Instance.
Hello
We must prepare the proposal of b2b & b2b both. If we can deploy B2B & B2C stores in a server instance. If possible, what are the challenges we can get. If not possible, why not possible?
Thanks in advance
~ RajiYou can not run both in the same instance.
It is not possible.There will be only one path of config instance. If you load the module B2B it overrides B2C configs.
So, be it B2B or B2C.Peace
Shaik -
Can I download windows 2008 server R2 64 bit Bill through the Internet.
I bought the copy at retail of windows server 2008 R2 64-bit x. and I send out countries but Server 2008 Media Server is here in India. I want to install this product on this server what can I do. ? can I download the support from the operating system through the internet in its place. ?
media is here and server in the other place and he wants intallation with in 2 days and I can send media can I download os across the net.
Help me for this matter.
No, you can't downloadit. You must purchase the appropriate version.
Windows Server forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?
original title: can't send or receive emails.Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.
Or you might want to try the new port settings.
http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm -
Maximum number of instances that can be created on an oracle server?
Hi all...
Can you tell me what is the maximum number of instances that can be created on an oracle server?
Thanks and greetings
Raymond Vinay
Raymond Vinay wrote:
Hi all...
Can you tell me what is the maximum number of instances that can be created on an oracle server?
Thanks and greetings
Raymond Vinay
The answer would be that as much as the ram in the server will stand. Is not limited the case as such. Maximum of how many you have created so far?
Aman...
-
You can run several APEX headphones for different instances on the same server
Please confirm that we can run several APEX headphones for different instances on the same server? It is a configuration of xml configuration or do we need to do more?
Thank you
Tony Miller
SmartDog Services
Austin, TX
Hello
With last listener APEX, you can configure multiple databases
Oracle Application Express listener configuration
Is that what you mean?
Kind regards
Jari -
Disconnect the user from the sql server Server 2008 SQL server client
Hello...
Please can someone guide me on how to disconnect the server SQL server 2008 sql server user client if the client is more than 10 minutes of inactivityThank youSaloméHello
SQL Server is not supported in these forums. Please ask the appropriate here Microsoft TechNet Ant:
http://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer
Thank you.
-
Cannot access internet on the server
I set up VPN for Server 2008 R2. But after configuring VPN, unable to connect to the internet from this server.
I have two NIC
The IP configuration of the NETWORK adapter that is connected to the internet is
IP 10.2.107.125
Subnet 255.255.255.0
DG 10.2.107.1 and
DNS is 192.168.222.6.The display of the error could not connect to the server.
What could be the problem?
Please suggest.
Support is located in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?
I have a setting wrong?I can't find a setting that relates to this in either Terminal Server Config or Terminal Server Manager...Any help would be much appreciated.Hi Richard,
Thanks for posting your question on Microsoft Community!
I suggest you to ask your question in the section service Terminal Server TechNet forums for assistance.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
I hope this helps.
-
Why Windows 2008 R2 Server Foundation has received limited permissions?
I install a software of SAP on a Microsoft Windows Server 2008 R2 Server (Foundation Edition) on a HP Proliant server.
The installation fails to access to the registry key 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi '.
The exact error message is "unable to open silsvc. An error prevents opening this key. Details: access denied. »
When to use REGEDIT. EXE to display the registration key, it reports that access is denied to view properties (not to mention changing permissions).
Why this registry key entry is locked against the administrator?
What can I open as long as the user TrustedInstaller?
Alternative workaround?
Concerning
Joe Oppenheim
Hello joppenheim,
You question would best address in TechNet for the Windows Server 2008 forum.
Click here for a link to transfer your question in the TechNet forum.They have Windows Server experts who will be able to help with your problem.
Thank you
Marilyn
-
I have a ts 2008 license server with 90 per available user licenses (21 already issed). However, users get a message that says that there are no available licenses. The TS are iss device by installing licenses. Local group policy is not configured on each ts. The strange thing is that I can't find the option to license type within the domain group strategy, however, I suspect that this is the problem as when I go through the configuration in the RD Licensing Manager system indicates that the license server will be able to issue per user Cal. If anyone has had / overcome this problem I would be very gratefull to know the solution. Best regards Steve
Please repost your request in one of the most appropriate Microsoft Windows Server Forums, thank you!
-
Original title:
Windows Mail in Vista
Can anyone help please. I tried to open my email this morning - as usual - and it asks me to enter my username and password. I did it several times but it won't let me and I get as part of the error message: -.
Internet connection required: Server error: 0x800CCC90, error number: 0x800CCC92
I have been in contact with the technicians at Microsoft, but apparently they are more supported Windows Mail. I can access my mail through my e-mail provider, but it's really annoying!
Internet connection required:
This has not preceded by a long and complicated URL that begins with https://accounts... ? The idea is that you must click on the link to log in and verify that it is access you your account by filling out a CAPTCHA. Is that what you did? That's happened?
-
Problems with NAT? Can't access internet from inside the network?
I was intrigued with this problem for a few days now. I'm stuck on what could be the issue. The problem is that I can ping my router, G0/0 and G0/1, to the internet. However, since the switch and my PC, I can not ping Internet. I'm sure that everything is configured correctly, but here is my setup for the switch and the router:
Router 1:
version 15.1
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname LAN_Router_1
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 *.
!
No aaa new-model
!
no location network-clock-participate 3
!
dot11 syslog
no ip source route
!
IP cef
!
!
!
!
domain IP MyTestLab.com
8.8.8.8 IP name-server
IP-server names 8.8.4.4
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
voice-card 0
!
!
!
!
!
!
!
Crypto pki token removal timeout default 0
!
!
!
!
license udi pid CISCO3845-MB sn FOC105013BA
username * secret privilege 15 5 *.
!
redundancy
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
!
!
!
!
!
!
interface Loopback0
192.168.254.1 IP 255.255.255.255
!
interface GigabitEthernet0/0
DHCP IP address
penetration of the IP stream
stream IP output
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
media type rj45
!
interface GigabitEthernet0/1
the IP 192.168.0.1 255.255.255.248
penetration of the IP stream
stream IP output
IP nat inside
IP virtual-reassembly in
GLBP 100 ip 192.168.0.4
priority GLBP 100 115
GLBP 100 preempt
automatic duplex
automatic speed
media type rj45
!
ospf Router 5
router ID - 192.168.254.1
network 192.168.0.1 0.0.0.0 area 1
192.168.254.1 network 0.0.0.0 area 0
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
IP nat inside source list 10 interface GigabitEthernet0/0 overload
IP route 0.0.0.0 0.0.0.0 dhcp
!
access-list 10 permit 192.168.94.32 0.0.0.15 connect
access-list 10 permit 192.168.17.0 connect 0.0.0.7
access-list 10 permit 192.168.52.0 connect 0.0.0.7
access-list 10 permit 192.168.0.0 0.0.0.7 connect
access-list 10 deny any newspaper
!
!
!
!
!
!
control plan
!
!
!
!profile MGCP default
!
!
!
!
!
connection of the banner ^ C
W A R N I N GTHIS IS A PRIVATE COMPUTER SYSTEM.
This computer system, including all related equipment, network devices
(specifically including Internet access), are provided only for
authorized used.All computer systems may be monitored for all lawful, including purpose
to ensure that their use is authorized, for management of the system, to
facilitate protection against unauthorized access, and to verify security
survival and operational security procedures.Monitoring includes active attacks by authorized personnel and their
entities to test or verify the security of the system. During the surveillance,.
information may be examined, recorded, copied and used for authorized
purposes.All information, including personal information, placed on or sent over
This system may be monitored. Uses of this system, authorized or
unauthorized, constitutes consent to monitoring of this system.Unauthorized use may subject you to criminal prosecution. Evidence of
any unauthorized use collected during monitoring may be used for
administrative, criminal or other adverse action. Use of this system
constitutes a consent to monitoring for these purposes.
^ C
!
Line con 0
Synchronous recording
local connection
line to 0
line vty 0
local connection
entry ssh transport
output transport ssh
line vty 1 4
opening of session
transport of entry all
!
Scheduler allocate 20000 1000
NTP 198.60.73.8 Server
NTP 13.85.70.43 Server
SaveRunConfig event manager applet
cron cron-event timer entry ' 0 0 * * ".
command action 1.0 cli 'enable '.
cli 2.0 action command "RAM".Router 2:
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname LAN_Router_2
!
boot-start-marker
boot-end-marker
!
!
! card order type necessary for slot 1
Monitor logging warnings
enable secret 5 *.
!
No aaa new-model
!
clock timezone CST - 5 0
!
dot11 syslog
IP source-route
!
IP cef
!
!
!
!
domain IP MyTestLab.com
8.8.8.8 IP name-server
IP-server names 8.8.4.4
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
type of parameter-card inspect global
Select a dropped packet newspapers
!
voice-card 0
!
!
!
!
!
!
!
Crypto pki token removal timeout default 0
!
!
!
!
license udi pid CISCO3845-MB sn FOC1411592J
username * secret 5 *.!
redundancy
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
!
!
!
!
!
!
interface Loopback0
192.168.254.2 the IP 255.255.255.255
!
interface GigabitEthernet0/0
DHCP IP address
penetration of the IP stream
stream IP output
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
media type rj45
!
interface GigabitEthernet0/1
IP 192.168.0.2 255.255.255.248
penetration of the IP stream
stream IP output
IP nat inside
IP virtual-reassembly in
GLBP 100 ip 192.168.0.4
priority GLBP 100 110
automatic duplex
automatic speed
media type rj45
!
ospf Router 5
router ID - 192.168.254.2
network 192.168.0.2 0.0.0.0 area 1
0.0.0.0 network 192.168.254.2 area 0
!
Default IP gateway 192.168.0.1
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
IP nat inside source list 10 interface GigabitEthernet0/0 overload
IP route 0.0.0.0 0.0.0.0 dhcp
!
SSH extended IP access list
permit tcp host 192.168.52.2 any eq 22 log
permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
permit tcp host 192.168.17.18 any eq 22 log
any eq 22 host tcp 192.168.0.1 newspaper permit
permit tcp host 192.168.0.2 any eq 22 log
permit tcp host 192.168.0.3 any eq 22 log
permit tcp host 192.168.0.5 any eq 22 log
denyip a session
!
access-list 10 permit 192.168.94.32 0.0.0.15 connect
access-list 10 permit 192.168.17.0 connect 0.0.0.7
access-list 10 permit 192.168.52.0 connect 0.0.0.7
access-list 10 permit 192.168.0.0 0.0.0.7 connect
access-list 10 deny any newspaper
!
!
!
!
!
!
control plan
!
!
!
!
profile MGCP default
!
!
!
!
!
connection of the banner ^ C
W A R N I N GTHIS IS A PRIVATE COMPUTER SYSTEM.
This computer system, including all related equipment, network devices
(specifically including Internet access), are provided only for
authorized used.All computer systems may be monitored for all lawful, including purpose
to ensure that their use is authorized, for management of the system, to
facilitate protection against unauthorized access, and to verify security
survival and operational security procedures.Monitoring includes active attacks by authorized personnel and their
entities to test or verify the security of the system. During the surveillance,.
information may be examined, recorded, copied and used for authorized
purposes.All information, including personal information, placed on or sent over
This system may be monitored. Uses of this system, authorized or
unauthorized, constitutes consent to monitoring of this system.Unauthorized use may subject you to criminal prosecution. Evidence of
any unauthorized use collected during monitoring may be used for
administrative, criminal or other adverse action. Use of this system
constitutes a consent to monitoring for these purposes.
^ C
!
Line con 0
session-timeout 360
exec-timeout 360 0
7 password *.
Synchronous recording
local connection
line to 0
opening of session
line vty 0 4
SSH access class in
Synchronous recording
local connection
entry ssh transport
output transport ssh
!
Scheduler allocate 20000 1000
NTP 198.60.73.8 Server
NTP 13.85.70.43 Server
SaveRunConfig event manager applet
cron cron-event timer entry ' 0 0 * * ".
command action 1.0 cli 'enable '.
cli 2.0 action command "RAM".Switch:
version 12.2
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug uptime
Log service timestamps uptime
encryption password service
!
hostname LAN_Switch
!
boot-start-marker
boot-end-marker
!
!
username * secret privilege 15 5 *.
!
!
!
No aaa new-model
clock timezone CST - 6
1 supply ws-c3750-24ts switch
mtu 1500 routing system
IP routing
IP - domain name MyTestLab.com
8.8.8.8 IP name-server
IP-server names 8.8.4.4
!
!
!
!
!
!
!
!
!
spanning tree mode rapid pvst
spanning tree logging
spanning tree extend id-system
!
internal allocation policy of VLAN ascendant
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
interface Loopback0
192.168.254.5 the IP 255.255.255.255
!
interface FastEthernet1/0/1
switchport access vlan 17
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/2
switchport access vlan 10
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/3
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/4
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/5
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/6
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/7
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/8
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/9
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/10
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/11
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/12
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/13
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/14
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/15
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/16
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/17
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/18
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/19
Description # PC #.
switchport access vlan 10
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/20
Description # X_BOX #.
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/21
switchport access vlan 94
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/22
switchport access vlan 5
switchport mode access
!
interface FastEthernet1/0/23
switchport access vlan 5
switchport mode access
!
interface FastEthernet1/0/24
switchport access vlan 5
switchport mode access
!
GigabitEthernet1/0/1 interface
switchport access vlan 666
Shutdown
!
interface GigabitEthernet1/0/2
switchport access vlan 666
Shutdown
!
interface Vlan1
no ip address
Shutdown
!
interface Vlan5
IP 192.168.0.5 255.255.255.248
!
interface Vlan10
address 192.168.10.2 255.255.255.0
!
interface Vlan17
IP 192.168.17.17 255.255.255.248
!
interface Vlan52
IP 192.168.52.1 255.255.255.248
!
interface Vlan94
IP 192.168.94.33 255.255.255.240
!
ospf Router 5
router ID - 192.168.254.5
Log-adjacency-changes
network 192.168.0.5 0.0.0.0 area 1
network 192.168.10.2 0.0.0.0 area 2
network 192.168.17.17 0.0.0.0 area 2
network 192.168.52.1 0.0.0.0 area 2
network 192.168.94.33 0.0.0.0 area 2
0.0.0.0 network 192.168.254.5 area 0
!
IP classless
IP route 0.0.0.0 0.0.0.0 192.168.0.4 permanent
no ip address of the http server
no ip http secure server
!
!
SSH_IN extended IP access list
permit tcp host 192.168.52.2 any eq 22 log
permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
permit tcp host 192.168.17.18 any eq 22 log
any eq 22 host tcp 192.168.0.1 newspaper permit
permit tcp host 192.168.0.2 any eq 22 log
permit tcp host 192.168.0.3 any eq 22 log
permit tcp host 192.168.0.5 any eq 22 log
deny ip any any newspaper
!
!
connection of the banner ^ C
W A R N I N G
THIS IS A PRIVATE COMPUTER SYSTEM.
This computer system, including all related equipment, network devices
(specifically including Internet access), are provided only for
authorized used.
All computer systems may be monitored for all lawful, including purpose
to ensure that their use is authorized, for management of the system, to
facilitate protection against unauthorized access, and to verify security
survival and operational security procedures.
Monitoring includes active attacks by authorized personnel and their
entities to test or verify the security of the system. During the surveillance,.
information may be examined, recorded, copied and used for authorized
purposes.
All information, including personal information, placed on or sent over
This system may be monitored. Uses of this system, authorized or
unauthorized, constitutes consent to monitoring of this system.
Unauthorized use may subject you to criminal prosecution. Evidence of
any unauthorized use collected during monitoring may be used for
administrative, criminal or other adverse action. Use of this system
constitutes a consent to monitoring for these purposes.
^ C
!
Line con 0
session-timeout 60
exec-timeout 60 0
Synchronous recording
local connection
line vty 0
access-class SSH_IN in
local connection
line vty 1 4
access-class SSH_IN in
opening of session
line vty 5 15
access-class SSH_IN in
opening of session
!
NTP 198.60.73.8 Server
Event Manager environment suspend_ports_config flash: / susp_ports.dat
Event Manager environment suspend_ports_days 7
Event Manager user Directorystrategie "flash: / policies /.
Event manager session cli username "stw".
political event manager sl_suspend_ports.tcl
political event manager tm_suspend_ports.tcl
SaveRunConfig event manager applet
cron cron-event timer entry ' 0 0 * * ".
command action 1.0 cli 'enable '.
cli 2.0 action command "RAM".Well, I totally forgot the keyword "log" and NAT:
Cisco IOS NAT support ACLs with a keyword "log"?
A. When you configure Cisco IOS NAT translation dynamic NAT, an ACL is used to identify the packages that can be translated. The current NAT architecture does not support the ACL with a keyword "log".
http://www.Cisco.com/c/en/us/support/docs/IP/network-address-translation...
If your problem is not the mask with joker, but the command "log"...
Maybe you are looking for
-
Why I can't boot from a USB?
Hello Why I can't boot from a USB? I'm looking to replace a failed hard drive in a Mac Mini 2010. I replaced the hard drive without difficulty. I have a USB flash drive from known good 10.10.5 with an Installer (tested) well known about it. I pre
-
I would like to remove the 'Sample' option When I leave the cursor over an item for a period of time the 'Preview' screen comes up. It's annoying, and I don't need or want.
-
Tecra R950-104 - memory expansion
Hello Can I install 16 GB of Ram in my Toshiba Tecra R950-104? Currently, I have 8GB and I would like to replace the existing one with 2x8GB 2x4gb. Best regards LRP
-
I went to system security - find and resolve a problem-check performance problems. I checked something who asked what I wanted at the start. So I can't access anything whatsoever. Any suggestions? THX.
-
Vista Code 646 (KB976321, KB981726)
Can someone pls? Get the error code 646 for the 2 following updates: KB976321, KB981726. Thank you!