can't ssh, or navigate in remote devices phone MX300 or EX90
Hello
For devices EX90 use a second monitor, I can remote into the laptop.
interface GigabitEthernet4/0/24
EX90 description
switchport access vlan 20
switchport mode access
switchport voice vlan 799
bandwidth share SRR-queue 10 10 60 20
queue-series 2
priority queue
MLS qos trust cos
Auto qos voip trust
spanning tree portfast
end
For MX300 devices configuration interface is:
interface GigabitEthernet2/0/20
VIDEO MX300 description
switchport access vlan 99
switchport mode access
spanning tree portfast
end
Hello
The first things you should study Yes:
Can you ping the device?
The network configuration are correct?
The device is configured with a VLAN static?
Enable CDP is?
If you connect a PC directly on your device, you are able to access SSH or Web?
You can try the another network cable?
Concerning
Paulo Souza
My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."
Tags: Cisco Support
Similar Questions
-
Can I use 4 apple tv remote to operate the devices homekit with siri?
I just bought a 4th gen Apple TV and I'm experimenting with everything that can make the Siri to button on the remote control. I tried to use it to turn my lights on and outside, and I received the message "Sorry, I can't help with HomeKit here." Am I reason to assume this isn't allowed / supported? Curious to know why, as the Apple TV also serves as the gateway so that I can control my HomeKt remote devices from my phone (which is currently working).
Thank you!
-Jeff
That is right. Although the ATV4 HomeKit capable Siri on tvOS is not yet supported. My hypothesis is that Siri visibility will increase. Just as the music was not included until 9.1. I expect more integration through software updates. That said, being a user forum, and not something I've seen confirmed by Apple...
-
Hi as I said in the title, whenever I have troubleshoot my connection says the remote device or resource does not accept the connection. I have a race a portable CAREB on windows 7. I can internet eyebrows and watch videos online and things like that, but I can't update things like iTunes, flashplayer or any what games that I run on my laptop. everytime I try I get a message of program control connection what ever I am updating. I checked the other computers in my house and they are all very well, as well as in home game consoles have no problem connecting to the internet and update. someone help me please
Original title: Troubleshooting my my wireless conecction and it say the remote device or resource does not accept the connection
Hello
Thanks for posting in the Microsoft Community. This problem can occur because of incorrect settings of Internet Explorer. Initially, make sure you have Internet Explorer as web browser by default on the computer, refer to this link: http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Research I found that this problem can be solved by resetting the Internet Explorer settings. Try the following steps:
Press the logo Windows + R to open the Run dialog box.
Type inetcpl.cpl in the Run dialog box, press enter.
Now click on the Advanced tab , and then click reset.
Click apply , then ok.
Note: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.
Please refer to this same thread http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connection-problem-troubleshooting-the-remote/24bfdbf3-4914-45a8-ae45-38243b59be1c?page=1, he is older but he helped a lot of users.
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
the remote device or resource does not accept the connection - CIMC
Hello
I tried access MMIC remotely via web browser, but get the error message "the connection was refused by the target device.
I was able to access a device similar to the same place but will not be for this particular device.
Another diagnosis with internet explore came with reason "the remote device or resource does not accept the connection.
Any idea please?
Thank you
Hi Mike,.
Is the host this time online? Are you able to ping the server MMIC? If you are able to ping the server of CIMC, but unable to connect via SSH or the graphical user interface you can hit the following bug;
https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCun88303/?reffering_site...
I hope this helps. Please check all the useful answers as correct while others can find answers faster.
Qiese Sa'di
-
remote device does not accept connections is the error that I also get what is a proxy?
There are some sites that I can't connect to Internet, I get remote device will not accept the connection and check the proxy. I don't know how to solve this problem, I don't know what is a remote device, and I don't know if I have a proxy. Please help, I work on surveys and freelancing and you need to get to my sites. I thank very you much for any help you can give me.
This just sounds like your Internet is cut, not a Firefox problem.
But I'd still Try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- Click the menu button
click Help
then select restart with disabled modules.
If Firefox does not work, you can start Firefox in Mode safe as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
When the Firefox Safe Mode window appears, select "start mode safe."
If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- Click the menu button
-
"Unable to detect the remote device" Bluetooth re Nokia phone
I have two Nokia phones and can not connect to my laptop Toshiba Tecra via bluetooth
I am running XP SP3
V6.10.10 (T) battery Toshiba BT
Nokia PC Suite 7.0.8.2 versionInformation system in Nokia PC suite pointed out two stacks of BT compatible:
Microsoft Version 5.1.2600
Toshiba 6.0.7y19.0
The help of Nokia says "If your Bluetooth software is not supported by Nokia PC suite, this is mentioned in the information of Nokia PC suite window"
There is no indication in the information of Nokia PC suite window that my Bluetooth software is not supported.I constantly receive a "cannot find the remote device" message when you use Toshiba BT Stack.
I put my permananently visible to all Bluetooth phones and fortunately they send information to each other.
For a few seconds, one of my phones connected using the Launcher free config (not something I normally use) but then the phone has disappeared from the screen and now can not be detected.
I tried
-turn on and off again;
-connection by using the Nokia PC Suite application
-connection by using the BT stack
-connection using free config
Without success.Any ideas?
Maybe that your antenna has release the Bluetooth module so that your Bluetooth range is very limited.
Can you try to move your mobile phones very close to your laptop and the search for your bluetooth phones?
What is the result of the diagnosis function? :
(right-mouse click on the Bluetooth icon in the systray-> Options-> Diagnostics-> Run (verification tests)) -
How to access a shared on a remote device with a variable IP different during execution?
I need expert advice. I need to do something that sort of violates the assumptions behind the model of variable communication shared LV I have to be able to read a shared variable since a cRio device when the IP address of the device is not fixed. In other words, the IP address of the device is known only at run time. Is it still possible?
The only way I can think that LV would be able to find variable motor device/shared on the remote device is by changing the alias the runtime file and then try to access the variable shared again hoping this will cause also the sv engine note the new IP address and use it.
Hi Rob,
Yes it is possible. There are several ways to do so, but here are two. If you have LabVIEW 2009, use the new features for programming of the shared variables in the data communication palette. These just have an address that you can determine at run time. The address is of the form ni.var .psp://machinename_or_ip/libraryname/variablename. Here is an example of selecting a name at run time using these features:
If you are using a version prior to 2009, you can use DataSocket roughly the same way except that the address forms a little different - psp:\\machinename_or_IP\libraryname\variablename. These are also present in the same range of data communication.
Either of these methods, you will get better performance if you open the connection once, write several times and close the connection when you are finished. You should avoid opening and closing of the reference variable whenever you want to access the variable.
Good luck
Gerardo
-
Pro-grammatically discover remote devices (cRIO or sbRIO) within the Local network
Hi I'm developing an application where I need to configure my cRIOs. So first of all, I need to find out all the RIO within the network and configure one by one by selecting their IP address in the list.
What someone has to know everything how to discover. I think there must be a solution that MAX discover any type of remote devices.
Help, please.
You specify the version of LabVIEW you use. In LabVIEW 2009, you can use the RT to target information VI for a list of all targets of RT on your local subnet.
-
remote device does not accept the connection___
Windows 7 does not accept the connection for my site, but Xp will be, what is different about 7?
Hello alanep,
· Could you please tell us what is the remote device you are trying to access?
· What version of Windows 7 is installed on your computer?
· You try to connect to a remote device with Internet Explorer?
· What happens when you try to connect to the remote device, you get errors?
You can check if you have the same behavior in mode no. Add-on.
1. click on tools on the toolbar Internet Explorer and then click on Manage Add-ons.
2. click the name of the add-on at the top of the list of the toolbars and Extensions, and then click on disable.
3. click on close and then test Internet Explorer.
4. If the problem persists, open Manage Add-ons, enable the add-on that you disabled in step 2 and repeat the steps 1 to 3 for the next add-on in the list toolbars and Extensions.
5. Repeat steps 1 through 3 until the problem is resolved or until all modules have been tested.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
-
After the form of Vista to Windows 7, the office is connected to the network but cannot connect to the internet. All firewalls are disabled. The other pc on the network works well. I get the message "the remote device or resource accepts the connection.
There's a way easier than Cody (do not hit you m8, but sometimes things can be simpler)
Click on start/Control Panel/internet options/connections/LAN. Most likely your proxy is checked. Uncheck it and then reopen internet Explorer. Sounds like your proxy settings are on. I hope this helps.
-
Cannot reach the remote device.
Hello I am a strange problem and would be grateful to have any insight as to why this is happening.
The ASA is set up for two remote devices as follows
object obj-SV4(1:1) network
Home 172.16.2.24object obj-SV5(1:1) network
Home 172.16.2.25object obj-SV4(1:1) network
NAT static xxx.xxx.xxx.183 (indoor, outdoor)object obj-SV5(1:1) network
NAT static xxx.xxx.xxx.184 (indoor, outdoor)ASA # ping 172.16.2.24
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 172.16.2.24, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 18/10/20 ms
ASA # ping 172.16.2.25
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 172.16.2.25, wait time is 2 seconds:
?????
Success rate is 0% (0/5)When I trace the two devices to:
trace 172.16.2.25
Type to abort escape sequence.
The route to 172.16.2.251 172.28.213.202 0 ms 0 ms 0 ms
2 172.28.209.109 20 ms 20 ms 10 ms
3 * * *
4 * * *trace 172.16.2.24
Type to abort escape sequence.
The route to 172.16.2.241 172.28.213.202 0 ms 0 ms 0 ms
2 172.28.209.109 10 ms 20 ms 20 ms
3 172.28.209.110 20 ms 10 ms, 20 ms
4 172.16.2.24 20 ms 20 ms 10 msWhen I'm on the peripherique.109 he has the road to the entire subnet and I can reach le.24 et.25 both of him.
RTR #sh ip short int | Inclure.109
172.28.209.109 GigabitEthernet0/1.131 YES manual up upPing the server Samba 172.16.2.24
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 172.16.2.24, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 ms
Ping the server Samba 172.16.2.25Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 172.16.2.25, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 msthe road is
Server IP route vrf 172.16.2.0 255.255.255.0 NAMESERVERS 172.28.209.110
Any advise will be appreciated.
Hello
What is the device that owns the IP 172.28.209.110? She or one of the other devices on the way to the ASA there any type of ACL or anything else that might block traffic?
You see no link on the SAA (or all newspapers gathered the SAA) host 172.16.2.25?
Is there some ports TCP is listening on the server that should respond to connection attempts? You could try TCP Ping of the SAA for ports
TCP ping 172.16.2.25
You can also give a "source" address in the command above, if you need. When you run the Software ASA below 8.4 (1) then the custom above 'ping tcp' to be supported.
-Jouni
-
The remote device or resource does not accept the connection
I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.
Hello Kyle,.
Your computer is connected to a domain network?
If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.
Forums TechNet for Windows 7
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworkingOtherwise, try to follow the following suggestions to solve the problem.
"Internet Explorer cannot display the webpage" error
Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.
Also refer to:
The remote device or resource does not accept the connection
I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
Thank you
-
Remote device does not accept the connection since W7 re - install.
Since then reinstall it W7 Pro, I'm now no longer able to map a network drive on a NAS on the network. The NAS device is visible to all other domestic uses (Sonos, Internet TV, etc) and can be accessed via the front view in a web browser without any problem. I can PING the device and don't get a response, so no problems with the device itself (which was untouched before, during or after re-setup of W7).
Just cannot map a network drive!
Tried to disable the firewall etc, but still no luck. Also checked that all relevant services are running.
Someone has ideas that more I can do to get my laptop to talk to it as a network drive?
When I enter the ip address of the NAS and click 'Finish' to the card, I get the following dialogue:
The remote device or resource does not accept the connection
The device or resource to 192.168.x.xxx is not configured to accept connections on port 'file sharing and printers (SMB).any help would be greatly appreciated.
Thanks in advance.Hi Stuart,
The question you posted would be better suited to the TechNet community. See the link.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Hope this information helps.
-
IE9 "the remote device or resource does not accept the connection.
IE9, "the remote device or resource does not accept the connection" appears when you try to open any website. My office to tell me that it is connected but cannot access any www. Meanwhile, my laptop connects fine. I have reset the settings in the internet options does not. I downloaded 'team' to connect (or similar) and asked for a connection and I thought that suspicious so uninstall this program... leaving me without access to the internet... * sigh * please can someone help me?
Hello
Method 1:Step 1:Run the network troubleshooter and see if that diagnoses the problem.Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7Step 2:Reference:Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsSee also:How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problemsMethod 2:Temporarily disable antivirus programs and firewalls.Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareWindows Firewall
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewallhttp://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questionsNote: make sure that you enable the antivirus software, other security and firewall after the test programs.
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Display the results. -
* Original title: this page cannot be display the remote or unit does not accept the connection. (! found)
My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!
Hello Teresa,.
The probable cause of this problem could be due to wrong settings for internet explore.
Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
http://support.Microsoft.com/kb/956196/en-usWarning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Hope this helps, please answer with the results for assistance.
Maybe you are looking for
-
Settings of records that overlap do not work
When I call my settings of the duplication of records, they are all "replace". I choose another option in the menus, but they do not. I can not any setting other than "replace". This is true for MIDI and Audio settings. Everything else in the dialog
-
What operating system is used on the readynas RN10200?
I need to know what is the operating system of the system, and how I can access! I think it is probably Linux and am ready to install on a laptop so that I could access the readynas's Chitlins. I am totally not familiar with SSH and do not know how t
-
How to use Boolean loop values from 2 different sources to stop awhile?
I'm working on a program for homework indicating E5.4) using a single eLoop Whil, build a VI that runs a loop N times or until the user presses a button. Be sure to include the time delay Exress Vi so that the user has time to press the stop botton.
-
Original title: WBME\Logs\Framework.log I have a WINDOWS\SYSTEM32\WBEM\Logs\FrameWork.log file which is 1.3 GB with 65 404 fragments that cannot be defragmented. How I can fix this, or is it acceptable?
-
How to find what video card I have if dxdiag is not displayed there
When I try to update my drivers it won't find a couple of pilots out of the Device Manager. Then when I use dxdiag it dosent show what I have in my pc... what should I do?