Can't stop Macbook Pro

Similar Questions

• Can't stop MacBook Pro after upgrade to Mac OS Sierra

  Yesterday I had upgraded my MacBook Pro since OS X El Capitan with macOS Sierra. Unfortunately I can't stop him, I can't even restart. Whenever I have start/stop I get a black screen (no slider) and it remains frozen. I have to hold the power button for a few seconds so that he will stop. I want to avoid cleaning the installation and configuring everything. Does anyone have an idea what causes this problem? I cleaned the cache and reset the NVRAM without effect.

  ... I cleaned the caches

  I recommend that you do not have this, especially with a 'clean' non-Apple utility. All these things can do is cause problems. A SMC reset will remove some files from the system cache: reset the management system (SCM) controller on your Mac. That's all that anyone should ever do.

  Back up your Mac if you have not already done so. Read https://www.apple.com/support/backup/to learn how to do this please. To learn how to use Time Machine read to use Time Machine to back up or restore your Mac.

  Then, shut down your Mac and restart in 'Safe Mode '. To learn how to do it please read: try safe mode if your Mac does not start-up. Compare works your Mac in Mode for how safe it was.

  Then restart normally. If the same problem comes back, please read the section If a problem does not occur in safe mode for actions recommended to Apple.

  Finally, you can temporarily create a new user account and log into this account to determine if the problem also exists when connected to this account. To learn how to read How to test a question to another user on your Mac account. When you are finished troubleshooting, you can remove the temporary user account by following these instructions: macOS Sierra: remove a user or a group. Before you delete, confirm that you have not need of all the files that you have possibly set in this account.

• How can I use MacBook Pro as an external display?

  I have an apple TV with HDMI and I was wondering how I can use my MacBook Pro (2015) as a screen for the apple TV? They would be connected. HDMI

  Study using ScreenRecycler.

  Ciao.

• Can I use macbook pro with the lid closed in target mode?

  Hello

  I wish I could use my iMac 27 (Lat) 2015 as monitor for my Macbook Pro (mid-2013) so that the Macbook pro is closed.

  Two computers use El Capitan

  Is this possible?

  Jim P.

  A 2015 27 "iMac does not support display mode of the target.

  Use your iMac as a display with the target - Apple Support Display Mode

  iMac (retina 5K, 27 inches, end of 2014) and the iMac later models can be used as target Display Mode displays.

• You can improve the macbook pro 15 inch 2015 logic board

  I am the proud owner of a macbook pro mid 2015, 15-inch retina display 2.2 Ghz i7 (integrated graphics).

  I was wondering if it is possible to upgrade dedicated to one with the graphics card logic board or is there a compatibility issue?

  I know that the macbook pro with dedicated graphics card is the same size and all that one that I have so I was wondering if the logic boards are the same size.

  I hope this isn't a stupid question.

  Bruno jeanluke says:

  I was wondering if it is possible to upgrade dedicated to one with the graphics card logic board or is there a compatibility issue?

  I'm sorry. After the purchase, upgrade of the internal components is not possible.

  If you wish, you can sell the Mac you have and buy another Mac with the specifications you want.

• Buy photoshop elements from best buy. How can I download macbook pro?

  I bought photoshop elements and elements 11 best buy first and have a macbook pro. How can I download on my mac without a cd player?

  Get the serial number by following the steps listed here. Copy the contents of the DVD on a USB drive first then copy them to your hard drive and run the Setup file.

  Thank you

  Nikhil

• I can feed my Macbook Pro 2011 usb port

  Is it possible to power (charge) my MacBook Pro 2011 USB port?  I had the case where I forgot my card (or used my MacBook more than expected) and he should be charged.  Since normally the USB provides power, I didn't connect it to a power outlet (via adapter).

  I am running OSX El Capitan.

  Thank you

  N ° USB came out only one power supply.

  Ciao.

• Can not get Macbook pro to connect to my network

  I was unable to get a macbook pro to connect to my network. I am running a router with SRX400 G wireless broadband. I have 5 pc access without problem; However the macbook will not. I use WEP 128bits encryption, and while the mac detects the network, when I type the password, it is still not valid (the same password used on the pc without any problem).

  Since you are using WEP you enter the password.  You must enter the key 1 of the router in your wireless settings.

• I can't get MacBook Pro to start what it is.

  I have a MacBook in early 2011 Pro 15 ".  The other day, while he was playing in Mainstage my computer decided to restart but never got past the loading of 3/4 bar.  I have run all shortcuts start and seem to restrict the question down to the hard drive.  I bought a new ssd and then had to borrow a friends MacBook to connect with disk utility (my computer wasn't allowing me to any disk utility) to format the ssd drive and install OS X.  I installed the new ssd in my MacBook and I always get the same question.  I can't get into anything other than the single-user mode.  What is a motherboard problem or a firmware issue?  Someone at - it any other ideas?  RAM is tested ok, ssd tested ok, clean install of Mac OS X starts with another computer so that the work of.  Tested cable SATA, reset SMC and LANDAU, ok I can't access internet recovery mode (it loads, and then the screen goes black to white).  I'll try a firmware reset disk, I don't know how it will work but when I can't access anything whatsoever...

  I guess that's an incorrect configuration of the installed SSD. Assuming that there is no mechanical problem with the installation of the SSD, here is how you should have put in place.

  Clean Install of Mac OS X

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  This will not work if your computer is capable of a resumption of network. See the computers that can be upgraded to use OS X Internet Recovery to see if you can use this method. If this isn't the case, then your computer initially comes with a version of Snow Leopard on an installation disc. Can you use this disk to partition and format the SSD install Snow Leopard. 10.6.6 or later, is required to access the App Store, where you can download El Capitan for installation.

• How can I stop acrobat pro/std 2015 (DC) to ask if you want whenever it launches the default application for PDF?

  I know there is a checkbox not to ask once again inside the application.  I'm trying to define for users when it installs so that they are not invited.  The Customization Wizard has options to set a default value or allow app decide.  I couldn't find reference to a registry entry for this anywhere.

  Hello Jackie,.

  In double thread, answered: How to automate Acrobat to setting is not asking if you want to be defined as the default value?

  Kind regards

  Tariq Dar.

• Can I use webroot antivirus with my Macbook pro?

  My husband has Webroot AntiVirus and can add my MacBook Pro.  Is Webroot a recommended product for a Mac?

  No antivirus is recommended for a Mac. From the messages in this forum what do is cause problems. They are not all good.

  I do not use all those apps

• How can I format my Macbook Pro? I am first timer for formatting the Mac after using it for 5 years. Could you give the steps in the process of formatting? Thank you

  How can I format Macbook Pro OS X Yosemite 10.10.5? Could you give me the steps of formatting?

  -Backup of data you want to save

  -Start in Recovery

  OS X: on OS X Recovery - Apple Support

  and then format the boot disk and resinstall OSX via recovery

• my macbook pro stops when I put it near my little fridge there is a risk

  the macbook and the refrigerator

  Nearby magnets can make a Macbook pro sleep.

  Do not keep the Mac is close to a referigerator.

  MacBook Pro goes to sleep when stacked.

  http://support.Apple.com/kb/TS2917

• MacBook Pro 2012 does not SSD

  Hello

  So a few months ago, I upgraded my MacBook Pro (13-inch, mid-2012, OS X 10.10.5) with a SSD Samsung 850 Evo. Things were much faster and the other Corsair CMSA16GX3M2A1600C11 Apple Mac 16 GB (2x8GB) was also nice.

  One day, the Macbook has no more SSD, start repair of OS X and reinstalling did not help. If at start up the Mac, then applications suddenly crash randomly.

  Strangely, exchanging for 500 GB disk drive factory solves all problems.

  In addition, I can boot OS X from the SSD via USB3, but internally it does not work.

  I tried different SSD from Apple, Sandisk and Samsung, which were to be properly formatted or have OS X installed, but the Macbook simply does not accept them and either shows a blank screen or screen issue/question mark. With a support boot utility disk sometimes recognize them and sometimes not. The internal SATA cable has also been replaced by about 5 different cables, but that has not solved the problem. Replace the RAM, unplug the various components such as Superdrive or Trackpad as well.

  I can use the Macbook Pro normally but being prevented from using a SSD internal is a serious drawback. My next plan is to try the drive Caddy + SSD boot drive solution but somehow I fear that it could also do not work.

  Wouldn't be a kind of failure of the Logicboard? I'm certainly not an expert, but don't really see any other reasons.

  Thanks in advance!

  any SATA enabled the logic board on a MacBook Pro after that 2007 should accept an SSD (I guess that ANY Board with SATA connectors actually are eligible for one SSD)

  You may have damaged something with the Commission or if you are using any 3rd party with the DSS software is might be incompatible.

  Readers work on other computers or is there no option to test this?

• PS4 on MacBook Pro games

  Can I use MacBook Pro as a monitor?

  Adapter: http://www.apple.com/shop/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt UH - 4 k? fnode = 8 b

  I think of this:

  PS4 - HDMI - adapter DisplayPort HDMI/crush - Thunderbolt port on MacBook Pro 2015

  If you did not understand:

  IM connecting the PS4 a Thunderbolt-DisplayPort/HDMI then the adapter on the Thunderbolt port adapter.

  Can I use this set up for the games?

  No, it will not work. The Macbook has only video output, component video not software plug-in.