Can VMware see dilivery a windows7 on MS hyper-v vm?

Similar Questions

• Computer XP can't see shared files in windows7

  My original computer is a desktop like in XP. We use a wireless router for network a new laptop running windows 7. Both computers are having no problem with internet access. I'm following the instructions of network on the microsoft site to set up a home network for two computers, step by step. I've been successful that half - the portable windows7 can now see and share files, an external hard drive and a printer attached to the XP computer. But the XP computer can 'see' the portable windows7, BUT cannot access shared folders or files on the laptop. I'm sure that I shared the files correctly and/or the libraries on the laptop, but none of them appear on the netowrk places. When I look at the "whole" network and go the the correct workgroup, the laptop is here, but as soon as I try to open it I get an error message. " I'm a novice, instructions step by step for a fix would be appreciated.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• can not see the BTH003 on my Qosmio laptop bluetooth headset

  can not see the BTH003 on my Qosmio laptop bluetooth headset

  Hi koko,.

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems that Bluetooth headphones are not detected. I'll be happy to help you with this problem.

  (1) what is the exact error message / complete you receive?

  (2) what operating system is installed on your computer?

  (3) what is the brand and model of the Bluetooth headset?

  (4) have you made changes on the computer before this problem?

  I suggest you to follow the steps from the links and check if it helps.

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture. How can I fix it?

  I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture.

  How can I fix it? Someone please help

  Hello

  What operating system do you use?

  If you are using windows 7, I suggest you to follow the link and set the picture on the screen of the link fill and check.

  Make changes to your desktop wallpaper slideshow

  http://Windows.Microsoft.com/en-us/Windows7/make-changes-to-your-desktop-background-slide-show

• How can I see/display of the internal usb devices installed on the computer in my computer?

  I can't see the drive letters removable usb in my computer.  However, the removable usb drive letters are visible in disk management.  What can I do to display the letters of removable usb drive in my computer screen?

  Hello

  1. are you not able to see the readers or only the drive letters?

  2 corresponds to the letter displayed when the USB is connected

  I suggest that you try to rename the drive and check if it helps.

  I also suggest that you follow these steps and check if it works

  a. open the location of the computer and click organize.
  b. now, select folder and search options and click on the view tab in any drive
  c. now select the option "show readers, files and hidden folders. Click Ok

  I suggest that you send a screenshot of the screen that you refer to help you better.

  Use capture tool to capture screenshots

  http://Windows.Microsoft.com/en-us/Windows7/use-Snipping-Tool-to-capture-screen-shots

  See the link below to find out how to post screenshots or other photos in the forum discussions.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• Windows XP sees Win 7 computers on the network, but not Windows XP-based computers (7 can see 7, but 7 can't see XP and XP cannont see XP)

  We just installed a new Netgear Prosafe 16 port switch.  We use a wired Linksys router.

  With 10 computers on the network, XP can't see XP or 7.  And sees only 7 other 7 computers.

  We are able to ping to all computers.  All computers have access to the Internet.

  Network neighborhood shows computers only 7 to 7.  XP doesn't show anything.

  Error message:

  "The Working Group is not accessible.  Migh Tnot you are allowed to use this network resource.  Contact the administrator of this server to find out if you have access permissions. »

  "The network path is not found."

  Thank you!

  Hello

  -Are you connected to a domain network or a home network?

  Please follow the steps below and we update with the results.

  Method 1: Error Message When you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  Please follow the steps described in the following article and check if it helps.

  http://support.Microsoft.com/kb/913628

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Method 2: Error Message When you try to access a network share on a Windows XP-based computer: "workgroup is not accessible.

  http://support.Microsoft.com/kb/915107

  For more information, see the articles:

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Let us know if it helps!

• All network devices can see each other + Windows 7 computer, but machine Windows 7 can not see them

  Hello. Under the network of my machine Windows 8 folder, I can see all the devices on the network. This includes a printer, my computer Windows 7 (what I can access), an Apple TV (from special software), a wireless hard drive, the router and a digital recorder.

  The Windows 7 machine, I can only see the router and the printer. On special software, the Apple TV does not either. When you perform the Windows 8 computer host as a server for the special software, the Windows 7 machine could not see it on the special software. This means that there is something wrong on the Windows 7 this machine is not allowing him to detect other devices.

  In a game of LAN, Windows 7 and Windows 8 computers can't see each other.

  All devices are on the internet and I am posting this from the Windows 7 machine right now.

  Windows 7 and Windows 8 machine are on the same network.

  No device is on a host group and the group home service is disabled.

  Peer networking is enabled.

  Network discovery is turned on.

  Both connections are set to private/Home.

  Originally, the Windows 7 machine has been on his own home group and could be seen by anything. After a few hours, I finally got out of the home group, how other devices could see him then. However, he cannot always see other devices.

  How can I get the Windows 7 machine to see other devices? I am at a loss. Is there a service that I have disabled right now that needs to be enabled? I don't know what to do.

  Hello

  Please contact Microsoft Community.

  Disable the security software and check.

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Also check out the link below and check if that helps.

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/is-is/Windows7/why-can-t-I-see-other-computers-on-my-network

  If the problem persists, or you have questions about Windows, let know us, we will be happy to help you.

• Can't see secondary reading devices in sound?

  Hi all

  My friend recently bought a graphics card from Amd Radeon 5450 and after installing drivers
  We cannot see the realtek reading in sounds and it is only showing AMD HIGH DEFINITION AUDIO and saying no speakers are connected.

  and it has vga monitor and connected to the graphics card and speakers with realtek port... and we can't see them

  the audio is coming if we used port HDMI only... Please help play via the Realtek drivers

  

  I haven't tried to install the drivers reatek'a useless

  Hi Thierry,.

  I apologize for the delay in response.

  What is the status of a device in the Device Manager?

  I suggest you to install all important and optional updates to Windows and check if it helps.

  For more information, see link below

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  I hope this helps. Post back with the result so that we can help you further.

• Microsoft Visual C ++ Runtime Error - can not see the path of the file.

  When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.

  All it says, this is:

  Runtime error!

  Program: C:\Program F...

  How can I extend the above so I can see the path of the actual file?

  Also going to go for a 2 for 1 here...

  Immediately after the closure of the runtime error box, I get the message that search settings stopped working.  I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place.  I run Windows 7 Ultimate.

  Error information:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SearchSettings.exe
  Application version: 4.5.0.2
  Application timestamp: 4e04ab86
  Fault Module name: MSVCR90.dll
  Fault Module Version: 9.0.30729.4940
  Timestamp of Module error: 4ca2ef57
  Exception code: 40000015
  Exception offset: 0005beae
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:9956
  More information 2: 995611374799875ff43c42d4b1b84d70
  3 more information: 3d4b
  Additional information 4: 3d4b4db0455ea2295d172b959897673c

  Maybe just download a new MSVCR90.dll but I would like to hear what you have to say.

  Hello

  ·         Did you the latest changes on the computer?

  We must first identify to identify the program that is causing startup problems.

  Step 1:

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  Step 2:

   

   

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Can't see files in the USB.

  Original title: USB key

  I can't see the files in my key USB, even if choose to display hidden files

  Hello Chetan,

  To help you further on this issue, I would like to know a few question substantially the same.

  1. is this problem limited to any specific pen drive?

  2. do you get any error code or error message when you connect the USB?

  3. have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it works for you. Usually this problem is caused due to the virus on USB or hardware related issues.

  Method 1:

  Run the hardware and devices Troubleshooter and check. This troubleshooting will help you solve common problems with hardware devices.

  Refer to the following Microsoft Help article to run the troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Run the Microsoft Safety scanner and check if there is no threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 3:

  Try to change the drive letter of the USB and check if the problem persists.

  See the following Microsoft Help article to change the drive letter.

  http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• How can I see individual .jpg filename in WIN7 desktop slideshow backround?

  Slideshow of backround Office Win7 is resourcing folder with 8000 .jpgs
  How can I see filename .jpg individual displayed on desktop backround desktop slideshow?

  Thank you...

  Hello

  Please visit the links to search for a particular file.

  Advanced Tips for searching in Windows

  http://Windows.Microsoft.com/en-in/Windows7/advanced-tips-for-searching-in-Windows

  Find a file or folder

  http://Windows.Microsoft.com/en-in/Windows7/find-a-file-or-folder

• I can't see the files on the desktop.

  Suddenly changed the profile of my office and I can't see my files on the desktop on the screen more.

  How can I load up my profile of previous office again?

  Thank you.

  Original title: suddenly changed desktop profile and I can't see my files on the desktop more

  Hi SerdarEsendal,

  Thanks for posting in the Microsoft Community.

  In addition, how are you doing today?

  Icons and desktop files are mainly used to access files and applications (using the shortcut icons) at a faster rate. In your case, you seem to be unable to see the files on the desktop. I understand it must be frustrating. But, proceed us together as a team and try to solve the problem for you.

  Please answer the question-

  (1) is this limited problem files and icons on the desktop?

  (2) that you get an error message or error code?

  (3) have you done other changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  Note: You must run the fixit only if; the question is about the icons as well.

  Method 2-

  There is a possibility that the icons on the desktop are hidden.

  Show files and make sure that us.

  See the article-

  Show hidden files

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  Note: Make sure that you cancel the changes, since the important operating system files may be exposed to risk.

  In addition, you can also view the article-

  Recover lost or deleted files

  http://Windows.Microsoft.com/is-is/Windows7/recover-lost-or-deleted-files

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection?

  Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection?  owner of 192.168.1.104:50768 result [svchost.exe] TCP - PC:5357 ESTABLISHED

  Hello

  Thanks for asking!

  This is because the network discovery is turned on.

  If you want, I suggest try tuning off the COAST of the discovery of the network and check if it helps.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Reply back with the results. I'd be happy to help you further.

• I can't see the pictures in windows 7, the folder of the image in the library more images in my images. The few I managed to discover are red - terrible! Bring back the XP!

  I can't see the pictures in windows 7, the folder of the image in the library more images in my images.  The few I managed to discover are red - terrible!  Bring back the XP!

  Hi JenniferMaunder,

  ·         Did you do changes on the computer before the show?

  ·         What happens when try to view photos?

  ·         What is the format of the files?

  ·         You get the error message?

  ·         What application you use to see all the photos?

  Follow these methods.

  Method 1: Follow the steps in the article to see the photos with windows photo viewer.

  View and use your pictures in Windows Photo Viewer

  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  Method 2: Update the latest display drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For reference:

  Photo management

  http://Windows.Microsoft.com/en-us/Windows7/managing-your-pictures

• Why I can't see my photos

  Why if I can't see my photos, they are in a SD memory card, but I can't see them unless I open Windows Movie Maker and open up to a video which is filled with photos of the SD card. Then select "add photos or videos? Can you please help me understand how to solve this problem.

  Hello

  1. the SD card works normally on another computer?

  2 the SD displayed in the windows of the computer?

  3. are you able to use any other SD card normally on the computer in question?

  4 have had any changes made to the computer before the show?

  Run the troubleshooting form the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please check if you are able to use the SD card on any other computer.