not supported for ESXi 4 NIC... Can I simply add a NETWORK card?

Similar Questions

• NIC not supported in ESXi 5.0 U1 and ESXi 5.0

  Hi all

  I got new system for my virtualization vmware lab, but I got an error THAT NIC is not supported with ESXi.

  My system configuraiton is as below:

  Dell Optiplex 990
  Intel (r) Core i5-2500 3.30 GHz 3.30 GHz CPU
  RAM: 4 GB

  What NIC should I buy that is readily available in the market?

  Thank you

  SS

  Hello

  Realtek NIC supported edge in vSphere 5 for the time and compared to other products, they are the least expensive One.

  Realtek 8168
  Realtek 8169
  8111E Realtek

  See more compatible hardware on vm - Help.com

• Because Flash CS6 is not supported for OS x 10.8, can cloud members have Flash CS5?

  Because Flash CS6 is not supported for OS x 10.8, can cloud members have Flash CS5?

  I see Flash CS6 is not supported (http://helpx.adobe.com/flash/kb/mountain-lion-support-flash-professional.html ). My colleagues and I are not able to see some fonts and the colorpickers do not function correctly, as indicated in the URL.

  Can you make the previous version of Flash available for download and use with the accession of cloud just for this issue of OS X 10.8.

  It would be harder for us to return to an older operating system, and then to get just a very old version of Flash on our system.

  Thanks in advance,

  -Line

  Adobe Flash Professional CS5, CS6 and 5.5 are not compatible with Mac OS x (v10.8) Mountain Lion.

• Wake on LAN not supported for DPM nine HP blades

  We bought some new blades HP - G9 with HP FlexFabric 20 GB 2-port 650FLB Adapters Emulex BL460c and were disappointed to see that Wake on LAN was not supported by vSphere, so I can't use DPM.

  I activated the WOL in the BIOS, the cards do support WOL: does anyone have an idea why vSphere says it isn't?

  Our old kit is supported - WOL here BL460c G7s with network adapters converge Emulex HP NS553i Dual Port FlexFabric 10 GB.

  HP has done some research and it confirmed that a problem with the operating system and the driver.  «This Emulex NIC card doesn't have an option to Wake on LAN meets her Vmware Operating System»

  Firmware is 2015.06.01 (June 15, 2015)

  Driver is 10.5.65.21

  ESXi versions tested were 5.5 and 6.0

• Creation of Raw Device Mapping (RDM) is not supported for local storage (1017530)

  "Often, localstorage devices do not support VPD page 0x83 and can therefore be used for Raw Device Mappings (RDMS)." The content of the page 0x83 is used as a unique identifier for the device. For more information, see creating Raw Device Mapping (RDM) is not supported for local storage (1017530). »

  Does anyone know if this is even the case for modern storage?

  We are a dell shop, wishing to take advantage of the ability to create up to 64 TB RDM.

  However, the storage of the host in question will be local SAS only.

  Prefer not to have to merge muliple 2 TB VMDK into windows to make a record of 4.5 to.

  Then projected on the presentation 1 x 4.5 CT rdm

  If you plan to use a SAS controller, you should be able to do this. Your drive will be identified as a device of the naa, and you will be able to add as an RDM to VM - only with ESXi 5 (which can support more than 2 TB LUN).

• Your browser is not supported for this program. This program is expected to be launched above IE4 version!

  The provider's Web site will not reflect orders/quotes...
  We get this message
  "Your browser is not supported for this program.
  This program is expected to be launched above IE4 version! »

  URL of affected sites

  http://

  To work around this problem, you can also try using the User Agent Switcher add-on to give the impression that you are using IE on the site.

  You can contact the site owner to inform them of their poor support for Firefox.

  Alternatively, you can report a broken help site.

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• spell check does not work for dreamweaver Uppercases how can I get it back?

  spell check does not work for dreamweaver Uppercases how can I get it back?

  Hello

  Dreamweaver is an Adobe product. I suggest you to contact Adobe support for assistance. Please post your query in the Adobe forums.
  Dreamweaver

  http://forums.Adobe.com/community/Dreamweaver

• Printer drivers HP LaserJet M1005 MFP not supported for Windows 8

  Dear support,

  I use the printer HP LaserJet M1005 MFP range, but the drivers are not supported for Windows 8.

  Pls can update you with the new drivers of windows 8, which his slove my problem.

  Thanks in advance

  Concerning

  Vermorel

  Hi Majusko,

  If the Windows 7 installs on 8 to win, you must wait for the pilot to Win 8 to be released. Basic/Host-based driver available February 2013

  HP LaserJet and Color LaserJet - Windows 8 media

  HP trade-in program

• WebVPN - error: access method is not supported for the capture of WebVPN

  I'm watching a capture of webvpn on the SAA. I start the capture:

  test type webvpn user capture (entering a valid user name)

  Then I connect to the ASA to try to see track with "Using a browser to capture displayed data" as described in the setup guide.

  https:// / admin/capture/test/OCAP

  After login, I get this message in the browser:

  "Error: access method is not supported for WebVPN capture."

  If I stop the capture (capture test) before you try to connect, the error in the browser is:

  "404 not found".

  The/admin/capture/test/OCAP requested URL was not found on this server. "

  Any ideas greatly appreciated. Thank you!

  After some research, I finally found it

  DOC: Webvpn catches are recorded only in zip format

  
  

  CSCtg79320

  Symptom:

  WebVPN captures are only saved in zip format.

  Conditions:

  According to the following doc:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/WebVPN.html#wp1153077

  WebVPN captures can be recovered in the pcap format using the browser, which is incorrect. The document must be corrected.

  Workaround solution:

  N/A

  Thank you for your time and cooperation

  Portu.

  In case you have any other questions please note all useful messages and mark this question as answered

• Note support for 12.1.3

  ALL INSA

  EBS R12.1.3

  RHEL5

  I can't find the matching note support for R12.1.3

  I found only 12.0 and 12.2 as in:

  Installation of Oracle Applications and Notes of version 12 (12.0.4) for Linux (64-bit) upgrade (Doc - ID 416305.1)

  Oracle eBusiness Suite Installation and upgrade of exit 12 (12.2) Notes for Linux x 86-64 (Doc ID 1330701.1()

  
  

  
  

  
  

  Help, please...

  Thank you

  JC

  
  

  Here it is!

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 (Doc ID 761566.1)

  Kind regards

  Bashar

• Imported the Parallels VM, now I get "BusLogic SCSI adapter is not supported for 64-bit customers."

  I have a virtual machine 64-bit Fedora 16 that I use in Parallels Desktop.  During my first installation of VMWare Fusion 5, I had the opportunity to import this VM.  I did that, but when I boot, the virtual machine is suspended.  I went to the configuration of the virtual machine in VMWare and fixed a few things than the failed import.  Now I when I start the VM, I get this dialog box:

  The BusLogic SCSI adapter is not supported for 64-bit guests.

  I searched on the web and this forum, and I can't find information on solving this problem.

  I do not necessarily first as suggested by the other answer on this subject and instead, add the following line to the configuration of the Virtual Machine's .vmx file.

  scsi0.virtualDev = "lsilogic"
  

  This should fix the error message that you get without having to directly edit the hard.  Take a look at: changing the file .vmx for your VM from VMware Fusion (1014782)  

  That said, if you want detailed according to the existing real configuration recommendations then... To help understand what components are, how best to provide comprehensive diagnostic information is to use the command "Collect information to Support" the Fusion of VMware (menu bar) > help > collect Support information and then attach the .tgz file it created on your desktop for a response post.

• VixDiskLib_Cleanup always returns vixError (6) - the operation is not supported for the specified parameters

  Any ideas how we can determine what parameters it dislikes?  I am the appellant after VixDiskLib_Disconnect as recomment docs and using the same connection params struct I used with VixDiskLib_ConnectEx.

  Thank you

  -Ron

  UInt32 numCleanedUp = 0, numRemaining = 0;

  /= VDDK 1.1 header says connection spec should be null =/.

  connectParamsP - & gt; vmxSpec = (char *) NULL;

  vixError = VixDiskLib_Cleanup (connectParamsP, & numCleanedUp, & numRemaining);

  vixError (6) - the operation is not supported for the specified parameters

  Ron,

  I think that your connection is probably not use all transport advanced, in which case _Cleanup does nothing. If you connect without using advanced transport, cleaning returns 6 - there is nothing to clean up.

  Thank you

  Annick

• Firefox mobile not supported for lg optimus zip

  Hello, I have recently switched to straight talk and was sad to find that firefox mobile is not supported for the lg optimus zip. In the future, I hope that this will change.

  Hello moon_serenity, firefox does not work on your device because it has to little memory RAM (150 MB instead of the 384 needed for firefox to run). in the past there has been efforts to make firefox on android race on more than low-end devices, but the 384 seem to be the background limit which was concluded in which is possible to achieve. If I am afraid that there will be no way to make firefox run on the lg optimus zip.

  https://www.Mozilla.org/Firefox/mobile/platforms/

• Firefox toolbar upper and lower are suddenly "floating", disappearing and appearing, and it is not convenient for me. What can I do?

  Top Firefox toolbars and below are suddenly "floating", disappearing and appearing, and it is not convenient for me. What can I do? I need them to be there all the time.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
  
  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  
  You can click the maximize button in the upper right to leave the mode full screen or empty space of a right-click on a toolbar and use "exit full screen" or press F11.