Can WOL while the port is configured to authenticate through ISE

Similar Questions

• Manager profile - can I change the Port?

  Dear community,

  I have a little problem. A customer uses an OSX Server (to El Capitan. 10.11.2 + Server Version 5.0.15).

  The problem is, there is an Exchange Server that uses Port 443, so I can't use this port.

  My first test was a Port Forwarding of incoming: 8443 to macserver:443. I can reach the server, but when I log in, then it redirects me to the default 443 ssl port.

  I have checked the ssl httpd configuration, took a look in other apache-configs... changed ports 443 to 8443... but without success...

  How do you do that? Someone had the same problem?

  Thanks in advance

  No you can not change the ports using the Profile Manager. Even if you could change the ports at the end of the Profile Manager server, you have absolutely no chance of being able to change the equivalent settings built into iOS etc devices.

  Having two or more public IP addresses different so that the Exchange Server can have its own without conflict with the Profile Manager is an option that most of the larger organizations would use.

  It maybe by using a reverse proxy server could also be an option. The reverse proxy server would transmit 443 traffic to any server, it is by looking at the URL, for example exchange.domain.com:443 gets sent to this server and the mdm.domain.com:443 is passed to the other.

  NGINX is the main reverse proxy server software.

  PS. If it is not possible to overturn or transmit proxies the other ports used for profile, i.e. the NPP ports Manager, it is possible to reverse proxy standard web ports 80 and 443.

• I can't remove the port that my printer is listed on stop, file print

  I can't remove the port that my printer is listed when I get the message "print to file" requiring an output file Name.The message when I try to uncheck it's that the requested resource is in use. How can I proceed?

  This departure!

  http://www.Vistax64.com/Vista-General/132646-requested-resource-use.html

• How can I disable the automatic IP Configuration in Windows 7?

  Is someone can you please tell me how to disable the automatic IP Configuration in Windows 7?  I am happy to change the registry to implement if necessary.

  Why?

  Because my PC sometimes gives an IP address like 169.254.0.1.  This is because Windows has detected that your computer is connected to a network, but the PC has not yet given an IP address by DHCP on the network, so Windows Server the automatic IP Configuration comes in and gives the PC an IP address that starts with 16.254.

  The reason why that the DHCP server on the network has not given an IP address was because the network is coming a few seconds before the DHCP server comes up, and the automatic IP Configuration Windows comes too quickly.

  Of course, once the PC has an IP starting 169.254, he cannot communicate with my router that has an IP address that starts with 192.168.  The only cure, outside re-booting, is to issue the ipconfig/renew command to obtain an IP address from the router DHCP server.

  If I can turn off the automatic IP Configuration of Windows (I could disable in XP) then I can avoid this error.

  One option that you have.

  You can set the IP address to a static IP address.

  Reach:
  Beginning
  Control Panel
  Network and Internet
  Network and sharing Center

  Click on connection to the Local network (a separate dialog box opens Local Area Connectin status)
  Click on Properties (opens the dialog)
  Click on Internet Protocol Version 4 (TCP/IPv4)
  Click on Properties

  On the general tab, move the radio button to use the following IP address:
  Here you can set the IP address that you want to use the machine.

  Example of Configuration:
  192.168.0.254
  255.255.255.0
  192.168.0.1

  You will need to note the IP DNS addresses you need more.
  If you like you can even use a set of public DNS servers for free. http://www.online-tech-tips.com/cool-websites/free-DNS-server/

  Please note that the sample configuration assumes routers IP is 192.168.0.1, check please. :)

  Good luck

• How can I change the port setting?

  Just installed HP Color Laserjet 2550 L on my XP PRO laptop using the USB port.  Properties shows port is configured as DOT4. Printer is recognized as being online, but cannot print. How can I change the configuration of the port?

  Hi JohnNielsen,

  · You receive an error message or error code when you try to print?

  · What is the service pack installed on the computer?

  Follow the methods below:

  Method 1:

  Print a test page and check the results.

  Method 2:

  Run the patch from the link below: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/

  You can also check the links below: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=388394&prodTypeId=18972&objectID=c00775196

  Solve a problem: print: http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodSeriesId=388394&prodTypeId=18972&supportTaskId=22980

  With regard to:

  Samhrutha G S - Microsoft technical support.

• How can I remove the HP Network Configuration utility

  I am P2Ving some HP machines and reading the posts here on how to remove most of the HP components, but I'm stuck on how to get rid of the HP Network Configuration utility program that puts the HP Network icon in the system tray.  There is a post of Guillermo Musumeci in 2007 that said using this command:

  SNetCfg.exe - v u cq_cpqteam

  to do it, but I can not find snetcfg.exe on this server.

  There is also a post of Jasemccarty in 2007 that said this keymay be the key to remove:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\

  {4D36E975-E325-11CE-BFC1-08002BE10318}\{FD0FF0D6-4876-4894-9274-258564E35C07}

  But this key does not appear in the registry on that server.  Anyone has any ideas on how to remove the last piece of a P2V-centric software HP had VM?

  Anyone know why HP makes breath difficult to remove their drivers and other components?

  Thank you

  Dan

  Open the properties of your network card (either will do)

  Go - properties and click the HP tool and select "Uninstall".

  See also http://ctxadmtools.musumeci.com.ar/HPPSPCleaner/HPPSPCleanerDownload.html for a tool to strip all HP components for you - I use it regularly after P2Vs.

• Change the Port Group Namespace for autonomy through the API?

  Work with vShield / POSSIBLE 5.5.0a.

  Take a group of ports which, out of the box will have a default namespace. As a result, you see the following menu items and information:

  

  By clicking on the Stand-alone namespace change link is there for that. We now have a group of ports with the stand-alone namespace and the additional menu tabs, firewall App and SpoofGuard.

  

  I can of course change for autonomy through the user interface, but can not find the equivalent API calls in the vShield API Programming Guide to do it programmatically. Can someone please advise on how to do this via the API?

  Thought that I would realize, since I figured this out in the end - a case of RTFM! Namespaces to appear in the Guide of programming on page 186, but there is no explicit mention of the way to make a group of independent ports. However, after revisiting the guide the penny dropped that adding a space of names to the data center is the equivalent of the evolution of a group of ports to a stand-alone namespace. Once you enter that (may be more obvious to you, it was for me), the examples in the guide can be followed.

  So to change ports for the autonomy group namespace, you must do the following:

  Https:///api/2.0/namespace/datacenter/ POST

  dvPortGroup-xxxxx

  Make sure that the content type is set to application/xml, text/xml (which has worked for me in the document) and not in the contrary case, it fails with a complaint about content type.

• Where can I find the options to configure the IP address, gateway, DNS and network mask for my ethernet connection?

  original title: Ethernet configuration

  How/where can I find blue page that displays: IP address, gateway, subnet mask, DNS

  Hi Dr. Pasquale,

  ·         Are what blue page you referring?

  If you need to find the IP address of your computer you can use the prompt to to do. You have ti use the ipconfig command to get the details.

  a. Click Start, click Run.

  b. type cmd and press ENTER.

  c. type ipconfig and press ENTER.

  See the following articles for more information.

  Microsoft Windows XP: Ipconfig

  The syntax and Options for using the Ipconfig Diagnostic Utility for network connections

  If this isn't what you're looking for then respond with more information so we can help you best.

• Can I exchange the Portégé R700-187 parts to install Win 10

  Hello
  can I Exchange parts on my R700-187 to make it stretch to win 10?

  Thank you
  PJS

  This is not possible because everything is integrated in the motherboard.

• I can not run the Setup program for great Chase Through Time of Carmen Sandiego on my Windows 7 laptop.

  It is an ancient game I want to play again for old times sake, but my laptop is a 64-bit that the installer says that it is not compatible with. Is there any compatibility mode setting that helps?

  Hello

  Which edition of windows 7 you are using?

  Step 1: This game is not compatible with windows 7. You can try to install in compatibility mode and check.

  Step 2: If you still experience the same problems of compatibility in install / playing this game you can use windows XP mode.

  Windows XP mode cannot be installed on the following editions on windows 7.

  ·          Professional

  ·          Ultimate

  ·          Enterprise

  Reference: http://windows.microsoft.com/en-us/windows7/products/features/windows-xp-mode

• Dear all, I can not play the flash videos from any website through firefox because it freezes, but when I run firefox as administrator, then it works fine (but Google Chrome plays all the videos normally.). I use Windows 7 & Firefox 7.0.1. Help, pleas

  Dear all,
  Firefox crashes when I try to play flash videos from any website, but when I run firefox as administrator, it works very well. (but Google Chrome, Opera & I.E9 video parts without administrator.) I use Windows 7 & Firefox 7.0.1. Help, please.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• Can I get the updated platform (KB971644) without going through Windows Update

  My company administrator has locked the Windows Update feature, but I would use the new Live Sync, which requires platform update (KB971644). Is there a way to get it without going through Windows Update?

  Install these 4 updates:

  971512 (http://support.microsoft.com/kb/971512/ ) Description of the Windows Graphics, Imaging, and XPS library

  971513 (http://support.microsoft.com/kb/971513/ ) Description of Windows Automation API

  971514 (http://support.microsoft.com/kb/971514/ ) Description of Windows portable devices

  960362 (http://support.microsoft.com/kb/960362/ ) Description of Windows Ribbon and Animation Manager Library

  Follow the links and download and install all updates 4.

  These 4 updates are the platform update for Vista.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Satellite A30: Can not find the COM ports when trying to query the modem

  Hello.
  I have satellite A30 and I reinstall windows xp at home, but I can't find any com port whenever I try to query the modem the display hardware confilct, but in Device Manager no sign of error/confilct, I did everything what I can.
  Add the port,
  Add more then 1 port
  disable the printer port
  change the printer port
  Reinstall derver modem,
  In short, I've done everything I can. its always show (! yellow) mark.if I add the port and if I remove the port and there is no sign of error.
  If someone help me to solve this problem a little,
  regared.
  MGK.

  Post edited by: mghouskhan

  The modem uses a virtual com port. It s not a real port.
  I wonder why it usually happens after the installation of the new operating system, you must install drivers Toshiba together in the right order
  Installing the chipset utility is important

  The modem driver should do the work and you n t need to activate com ports
  Please choose the right side of the page of the Toshiba driver modem driver after installing the OS correctly. I think that's the key

• How to configure a port as the port of the server

  I'm new to UCSM,

  What are the steps for configuring a port in the ports of the server.

  Step 1 in the Navigation pane, click the Hardware tab.
  Step 2 tab in the equipment, develop interconnections > Fabric_Interconnect_Name > Module fixed >
  Unconfigured ports.
  Step 3, click on one or more ports under the Unconfigured Ports node.
  Step 4 slide the selected ports and drop them in the Ports of the server node.
  The ports are configured as server ports, removed from the list of ports configured and added to
  the Ports of the server node.

• Where can I get the software for the multimedia keyboard KU-9963?

  I have a multimedia keyboard HP KU-9963, but can't find the software to configure the keys of those.  Any help would be appreciated.

  Hi, John:

  I had once a Business Desktop d530 with a keyboard with about 8 buttons or so who launched applications.

  Just as a shot in the water, maybe you can try this driver for the keyboard, I had of the d530 in the chance that it will work.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316720&prodNameId=316722&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-45469-1

  Paul