Can I exchange the Portégé R700-187 parts to install Win 10

Similar Questions

• Manager profile - can I change the Port?

  Dear community,

  I have a little problem. A customer uses an OSX Server (to El Capitan. 10.11.2 + Server Version 5.0.15).

  The problem is, there is an Exchange Server that uses Port 443, so I can't use this port.

  My first test was a Port Forwarding of incoming: 8443 to macserver:443. I can reach the server, but when I log in, then it redirects me to the default 443 ssl port.

  I have checked the ssl httpd configuration, took a look in other apache-configs... changed ports 443 to 8443... but without success...

  How do you do that? Someone had the same problem?

  Thanks in advance

  No you can not change the ports using the Profile Manager. Even if you could change the ports at the end of the Profile Manager server, you have absolutely no chance of being able to change the equivalent settings built into iOS etc devices.

  Having two or more public IP addresses different so that the Exchange Server can have its own without conflict with the Profile Manager is an option that most of the larger organizations would use.

  It maybe by using a reverse proxy server could also be an option. The reverse proxy server would transmit 443 traffic to any server, it is by looking at the URL, for example exchange.domain.com:443 gets sent to this server and the mdm.domain.com:443 is passed to the other.

  NGINX is the main reverse proxy server software.

  PS. If it is not possible to overturn or transmit proxies the other ports used for profile, i.e. the NPP ports Manager, it is possible to reverse proxy standard web ports 80 and 443.

• I can't remove the port that my printer is listed on stop, file print

  I can't remove the port that my printer is listed when I get the message "print to file" requiring an output file Name.The message when I try to uncheck it's that the requested resource is in use. How can I proceed?

  This departure!

  http://www.Vistax64.com/Vista-General/132646-requested-resource-use.html

• Recently I bought Photoshop CC for a PC. I now changed to a MAC and want to know if I can simply exchange the licence, or I have to buy a new one?

  Recently I bought Photoshop CC for a PC. I now changed to a MAC and want to know if I can simply exchange the licence, or I have to buy a new one?

  Hello

  You can actually have installed creative cloud and on two computers, signed as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

  You can download the installer for Creative Cloud from here:
  Creative cloud help | Creative cloud desktop.

  After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

• I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  All calendars are enabled in the sidebar?

• I've lost all my acrobat adobe Pro XI files during a reinstallation of win7.  How can I get the news I need to download and install Adobe Acrobat XI Pro?

  I've lost all my acrobat adobe Pro XI files during a reinstallation of win7.  How can I get the news I need to download and install Adobe Acrobat XI Pro?

  [Read https://forums.adobe.com/docs/DOC-7273]
  [Ask in the correct forum allows... Left the connections for specific program forum forum... MOD]
  

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

• How can I solve the error 16 when I try to install a program?

  How can I solve the error 16 when I try to install a program?

  In Adobe Creative Suite or Adobe Creative Cloud configuration error

• I can't open the software HAVE so I uninstalled to installed a new one because he tried the version. But the creative cloud show I've installed. What can I installed a new?

  I can't open the software HAVE so I uninstalled to installed a new one because he tried the version. But the creative cloud show I've installed. What can I installed a new?

  Please use the cleanup tool in the link Use the Adobe Creative Cloud cleaning tool to resolve installation issues to clean up instances of the application and install it back once more.

  Hope this will help you.

  Kind regards

  Hervé Khare

• How can I set the DSO AU to 8 MB during install/config grid Infrastructure?

  Hello
  
  How can I set the DSO AU to 8 MB during install/config grid Infrastructure? Storage installer screens do not have the ability to set a caliber of more big to ASM when creating initial DATA DG, just go with the value defaults to THE (1 MB). Our SAN provider did studies and for ASM a framework to THE 8 MB instead of the default 1 MB will give better performance. Is there a template that I can change preinstall so the installer will create the DG with a frame of 8 MB DATA?
  
  
  Thank you
  Tom

  Hello

  You can not change it to the default diskgroup created during installation of GI.

  Only option you have is to make an installation by default, create a new diskgroup and move all the files needed.
  If you can read German see here for a tip on how to do it:

  http://www.Oracle.com/WebFolder/technetwork/de/community/dbadmin/tipps/asm_dg_change/index.html

  Concerning
  Sebastian

• Satellite Pro A100 - can I exchange the CPU?

  Hello world

  I have a Satellite Pro A100-198 with a core duo processor. I would like to replace the processor of a Satellite Pro A100 830, which is Core2Duo in the Pro A100-198. They both have the same chipset-expected-they be any problem with that? This would increase the clock speed of 1.66 GHz to 2.0 GHz. They all have two Intel 945 PM Express chipset.

  I just upgraded from XP to Windows 7 32 bit and the performance score is 3.4. My BIOS version is 1.9 and I see there is an upgrade to win all the version 6, but I can't find the BIOS version history - it is better to upgrade. For the moment, I'll see if there are problems.

  Thanks in advance Mick

  Post edited by: mdfcv

  Hi Mick,

  As far as I know the two books belongs to the PSAACE series. Can you confirm this? You can find this information on the underside of the laptop.

  Normally if the books belong to the same series, it should be possible to exchange the CPU. They use the same hardware, so you can exchange.

  But don t forget this isn't supported CPU upgrade. If you have the warranty you will lose it. Other s CPU are pre-tested not on your laptop.

• How can I change the port setting?

  Just installed HP Color Laserjet 2550 L on my XP PRO laptop using the USB port.  Properties shows port is configured as DOT4. Printer is recognized as being online, but cannot print. How can I change the configuration of the port?

  Hi JohnNielsen,

  · You receive an error message or error code when you try to print?

  · What is the service pack installed on the computer?

  Follow the methods below:

  Method 1:

  Print a test page and check the results.

  Method 2:

  Run the patch from the link below: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/

  You can also check the links below: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=388394&prodTypeId=18972&objectID=c00775196

  Solve a problem: print: http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodSeriesId=388394&prodTypeId=18972&supportTaskId=22980

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Can WOL while the port is configured to authenticate through ISE

  Hi all

  I tried setting up WOL

  The L3 switch configuration I have no problem in it

  Configuration of the L2 switch without configuration of ISE

  interface fa0/1

  switchport access vlan 100

  switchport mode access

  spanning tree portfast

  It works well, but after that I put the ISE configuration on the port, WOL is not working.

  so please help can I use ISE + WOL or there will be problems because of that.

  I read a custom ' authentication control direction in "which should enable ISE and WOL.

  then, which will affect on something.

  Thank you.

  Yes, that's correct. If you add the command "authentication control-direction in" on a switchport then he will allow the "Magic Packet" WoL should be sent to the unit of the end and wake him up.

  By default, a switchport configured to dot1x will only allow EAP traffic initially to the switchport (thereby breaking WoL) you don't need to add the command "authentication control-direction in" to allow WoL functionality to continue working while ensuring that the endpoint can still only send EAP frames to the switchport prior authentication of 802. 1 x.

• Can I exchange the C: drive?

  I have PC with XP Professional Version 2002 Service Pack 3. I also have Quickbooks and Microsoft Office Professional running on it.  This is my work computer, so I don't want to have problems with it.

  I ran disk cleanup and Disk Defragmenter last night. I have two hard drives on this desktop, which is my work computer.  Here is the result of fragmentation:

  C: drive capacity - 37,26 GB, free space - 7,76 GB, percentage free space - 20%.

  F: drive capacity - 112 GB, free space - 80,76 GB, percentage free space - 72%

  NOTE: I did not define this PC upwards.

  I moved everything I can think of the F: drive.  All my documents, pictures, data, CAD files, stored on the F: drive.  But all programs work on the C: drive.  Is there an EASY way to share things while I'm cramped for space?

  Rebecca

  Rebecca

  I understand your situation. All I wanted to do was encourage you to plan ahead. My motto that I used when posting to the newsgroups Microsoft, now unfortunately is no longer available, was "interrogation, plan, execute".

  I just was "forced" to abandon a Windows XP box and to migrate to a new computer. I could have bought a 32-bit computer and install Windows XP. Instead of standing still, I decided to make a great leap forward. Now I have Windows 7 Ultimate (64 bit). This has created a lot of problems to solve. Much more than I enjoyed at the outset. However, it will be the right path for me, but I recognize that the establishment of such that the change is less easy for others.

  One of my major problems was the use of hardware and software is more easily available and supported. In my case it was based on a 56 k Data / Fax modem. You can buy all of the printers and scanners incorporating a Fax, but I'm not a believer in "All in One" for a number of reasons. After reflection, I was moved some operations of the fax to send earlier. This experience illustrates how you can make 'free' changes and mitigate the inevitable problems when you do not upgrade.

  I have two other suggestions of freeware for you to try. They just re-reading the second paragraph of your first post.

  A better program of disk cleanup is cCleaner but note that cCleaner will not manage system restore points. It is still necessary to remove older restore points using disk cleanup facility. Perform these steps before the defrag for best results
  http://www.CCleaner.com/download

  A warning about cCleaner. Do not use the registry tool.

  A better tool than Disk Defragmenter is Defraggler

  http://www.Piriform.com/Defraggler

  Hope this helps, Gerry Cornell

• I bought 13 PS elements and did not know that the Windows Vista operating system is not supported by this version.  How can I exchange the PS13 bought for a version of Photoshop that supports the Windows Vista operating system.

  I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported.  How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?

  Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.

  Please see return, cancel or Exchange an order - Adobe

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• How can I find the which extensions (plugins, not) are currently installed by using JavaScript?

  I created a JavaScript module that allows to detect if a Firefox extension is installed in the client browser.

  I can check if a Firefox plugin is installed by querying navigator.plugins object, but I can't understand how to extensions.

  You can not check for extensions that are installed.
  
  Plugins can be detected through navigator.plugins you posted, but you can not detect the extensions for reasons of confidentiality and security.

  • https://developer.Mozilla.org/en/docs/DOM/window.Navigator

  It's the past, it was possible to check the images added by an extension, but that access has been blocked.

  • http://blog.Mozilla.com/security/2007/11/16/jar-Protocol-XSS-security-issues/
  • http://blog.Mozilla.com/Security/2008/01/22/Chrome-Protocol-directory-traversal/
  • http://blog.Mozilla.com/Security/2008/01/29/status-update-for-Chrome-Protocol-directory-traversal-issue/