Cannot access admin page

Similar Questions

• Cannot access Admin page, nor showing in Explorer after update to Firmware #26923836

  Hi, I just upgraded to 6.4.2 to 6.5.0

  Before I reboot:

  Cannot access admin page, became a loading bar with the NetGear logo, to receive a connection error message.

  I could see my SIN in Solution Explorer and browse the files.

  I rebooted and now it is happening:

  I get the connection error when tring to access the admin page. -Failure error as if he had nothing to this address. Same thing when I use the IP address.

  I ping the Ip and get an immediate response.

  I found some indications that I should be able to connect in SSH with putty, but it does not work for me.

  The LCD display indicating the right host name and version. I also got a message for the encryption to the startup key.

  Don't know what I can do at this point...

  We have tried to reinstall OS and nothing has changed.

  We have tried to unplug an ethernet, nothing has changed.

  The question has been reassigned to lvl 3. They came into tech mode.

  They discover that one of my 2 hard drives is a not synchronize properly and some corrupted system files. Simply, I removed the HDD and restarted normally. Everything was fine.

  I put the HARD drive bad and resynchronization.

  hope this helps someone else.

  PS, The Netgear Customer Service is good and fast - recommended!

• Cannot access the page «get modules»

  I had just refreshed my computer and I am trying to reinstall my Add-ons, but I can't access the page of the modules 'get '. I tried all the troubleshooting methods suggested. and still no:
  The secure connection failed

  An error occurred during a connection to services.addons.mozilla.org. The peer certificate has been revoked. (Error code: sec_error_revoked_certificate)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Can anyone help?

  How about you just go to https://addons.mozilla.org/ instead.

  Edit: this is not a Firefox 35.0.1 or any number of version, but with a certificate revoked on services.addons.mozilla.org

  The https://addons.mozilla.org still works fine.

  For playback so you understand how to properly use Bugzilla.
  Bug 1128368 - cert revoked about breaks services.addons.mozilla.org subject: addons

• R7000 can't access admin page and IP DHCP address range changed on its own

  I noticed recently that my IP range internal from 192.168.1. * to 10.0.1 on its own. I think I got the router configured to auto update to new firmware, so I think that it updated itself and change its settings. When I try to access the admin page that nothing loads. I tried 10.0.1.1 and 192.168.1.1 and nothing comes up. I was wondering if anyone else has had this problem recently. I will be eventually provided to the factory settings and set it back up like that, but I'm hoping to exhaust my options before you go this route. Any ideas?

  I was able to determine the cause. He I warned when you say IP changes when there is a second device with DHCP. I noticed there was some new computers on my network when I watched the network file share. I use the Netgear Powerline device to do wired connections to my living room. What I think has happened is that my recently developed neighbouring apartment unit in place the internet and also uses a feature of current line. I noticed that my DNS suffix changed to a different address, which is the ISP instead of my router. I put 2 and 2 together and realized that my network was overlaps sound via the Powerline. I have never set up an encryption key on the Powerline online so it was still using the default settings and connecting to my neighbors by current carrier. When I added the encryption key, the problem disappeared and my network returned to normal. Next time I should follow the instructions when setting up new network equipment. Oops

• Cannot access admin (ReadyNAS 102) Panel

  After turn on my NAS gets 192.168.2.25 IP address, I can ping from my PC. Power led blinks constantly after power to the top, I can't disable it only by unpluging power cord. I can't access Admin Panel by browser (connection refused) in Chrome and IE. I tried the procedure of resetting factory and OS reinstall that brings no improvement. RAIDar software is the realization that one SIN, but the firmware version is empty, so I guess there's the problem. Is there a way I can download the firmware - for example from USB when I have no access to admin panel? I am very disappointed because this is the State of the new product and my business really needs it goes fast...

  Hello CPR,

  Welcome to the community!

  The operating system and data are saved on the disc that is inserted in the ReadyNAS chassis. Without the records, there is no, you will not be able to access the admin page. SSH is also disabled by default, so if you want to access via SSH, you must Access the first admin page and then allow it to from there. Telnet access is designed for engineering and support of L3.

  Kind regards

• ReadyNAS NV Factory Reset cannot connect Admin Page

  I was just given a ReadyNAS NV without disks. I am a reader and slapped in, did a reset and everything went great. RAIDar indicates that the unit is in good health. I click on the admin page and it asks username username/password so I put in default admin/netgear1 and he says that it is incorrect. Could there be a name of user and password different?

  iMac15, 1-17 4.0 Ghz 32 GB RAM OSX 10.11.3

  Safari 9.03

  RAIDar 6.1

  NV Firmware 2.00

  Try admin/infrant1. If these credentials to work then you run the firmware which is old. You need to update the firmware.

• BlackBerry Smartphones cannot access web pages

  After accessing web pages without problem, I couldn't suddenly to. When I go to the browser, after you type in a web page, I get the consignment: "this is a problem when trying to render the page.

  I searched on the site Web of Blackberry for a solution without joy.

  If anyone has had a similar problem or could advise me what is going on, I would appreciate it.

  Thank you very much

  Gordon

  You are welcome

  Please solve the thread. Put brand of 'Solution' to the post with the solution.

  Thank you.

• Cannot access admin or safe mode...

  Hi, I have a HP Pavilion dv2500 with a screen broken or burned. (My step grandson accidentally shot of the stool on which I got). I hung it on a monitor so that it can still be used and have since bought another.  I put the password on the admin account and created a user account for my husband and one for comments.

  The problem is that I forgot the password I created. I tried everything I could think of, and I can't access the admin account. I know that you can access and change of safe mode, but because my screen is not working I can not see the loading screen, press F8 and select Safe mode.  It is attached to the monitor, but the display lights when it is loaded to the user accounts page. I created recovery discs when I got to the laptop, but I was hoping I wouldn't have to do it because I have a ton of family photos on the admin account I want to transfer to my new PC. I tried to access a safe mode then than the guest account, but he asks me admin password.

  Is there a way I can access the account admin or safe mode without using the F8 when loading? For any help or suggestion would be appreciated!

  Thank you

  Jen

  Edit: It has Vista

  Hi Jen,

  On another PC, download the ISO on the following link.

  PC login now

  Once downloaded, use a program such as ImgBurn to burn the ISO to a CD.  A guide on how to use it is on the link below.

  PC connection Guide now

  Insert the CD in your laptop you can not connect to and restart to boot from the disc.

  I hope that this should simply remove your password altogether, so you can configure then comes a new.

  Kind regards

  DP - K

• Cannot access ftp pages

  Hi, I use FF 21.0 and Win XP, sp3. I can't access FTP web pages. Unfortunately since I hardly ever use FTP, I don't know if it's pages, or a setting on my computer. I can't find where a setting in the browser can change my access to FTP sites. Should I turn on a setting on my computer somewhere? I can't navigate to one of the two sites in FF or IE. The two sites I tried to navigate into without success are:

  = > ftp://umaxcare.com

              (safe hardware support site for my scanner to get an upgrade plug-in).
  

  = > ftp://ftp.microsoft.com/services/whql/hcl/win2000hcl.txt

              (microsoft HCL text file)
  

  I get the "unsuccessful" page respective standard errors of loading in both FF and IE.

  Can someone help me please by suggesting if I need to change a setting or to check if these pages still exist?

  Thank you!

  I just tested the pages and you have the same problem. This isn't Firefox, but the pages himself.

• Virus SMART HARD drive - cannot access Admin folder or WF - error 0 x 80070005 using system restore

  original title: need help for the restoration of the system

  I got the SMART HDD virus. I thought that this one has been removed. I can access everything but my admin folder and my Windows Firewall. I tried a system restore but I get an unknown error 0 x 80070005.

  4/11 is also the furthest I can go back when there was an update. Why can't come back all other - can only be hidden by the virus too?

  Hello

  Disabled first happened to scan your system with MSE or another anti-virus program? You have scanned your system with Malware bytes? Before restoration, it is best to make sure that your system is clean. Some viruses will infect the system and also infected restore points, you did.
  MSE: http://windows.microsoft.com/en-US/windows/products/security-essentials
  Malware bytes: www.malwarebytes.org
  If you are unable to run these is normal mode, then try safe mode by pressing the F8 key for the system to start.
  I hope this helps.
  Jim

• Computer seems to be connected to the internet but cannot access web pages

  It says its connected to the internet and it can download the automatic updates, but when I open internet explore or mozilla or browser accesses a web page.

  The problem does not change if it connected to a hard line or wireless.

  The computer is a Latitude D620 on windows xp, if that helps.

  What happens when you try?

  Have you tried resetting IE?  (Tools |) Internet Options | Advanced...)

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Cannot access router page... any ideas

  I am running Snow Leopard on a MacBook Pro.

  I just updated my wrt110. Everything goes well until I restored my config.bin file.

  All my configs seem to have disappeared (password!). But no problem, I thought. I'll just go and put a new one.

  To my surprise, when I try to go to my IP (I see it on my network system preferences) I get thrown into a kind of a page of search with the following URL:

  http://websearch.Linksys.com/error_redirect_site/get_error_redirect?eg=1607625782&job=192.168.1.1/

  No matter what I have on any browser (I tried Firefox, Safari and Google Chrome) I get the same results.

  My router has lost the ID (now appears as the linksys just without password). I could fix it if I could barely get my order page.

  I searched all the help pages, but nothing tells me what is happening.

  Can anyone throw me a line on that?

  Thank you.

  Think you need to reset your router by pressing the reset button at the back of the router for 30-40 years years when it is turned on, after connect computer to the temporary router in this way, connect to the management page of the router with username/password default username and reconfigure the router by taking a look at this example of router configuration.

  Linksys router

  by default the user name: (leave empty)

  password: admin

  I hope this helps.

• Cannot access admin account

  One day when trying to connect to it gave me an error message saying that the profile could not be loaded, I looked for a solution and has not had time to do it in time so I just used the other user who is not an administrator. Now, I'm running into all sorts of questions where I need admin access just to download or remove a program, but when I choose 'run as administrator' or to do something that it doesn't gives me the possibility to enter my password as it was on XP, he said only: I don't have sufficient permissions. The last number is my computer does not recognize discs, and I'm unable to install the drivers on this user

  So what I'm asking is a way to make the user I use now an admin or a fix for the profile does not. I remember you used to be able to access an administrator account when you start in safe mode, but it is no longer give me that option

  I'm on windows 7 running a HP probook 4540 s

  Thank you very much for your help!

  If you have no error messages by typing commands in a command prompt, root user must have been created with administrator rights. If you receive error messages, you can send these errors?

  Alternatively, you can try to fix the profile to the original administrator account as described in the following link:

  http://www.PCAdvisor.co.UK/how-to/Windows/3495216/how-fix-corrupt-user-profile-in-Windows-7/

• Cannot access Admin Console Internal Server Error

  Hello

  I installed the server weblogic 10.3.6 on Red Hat EL 6,7 64-bit, x 64 processor.

  Able to access console Em and all the servervicess work fine, but when trying to connect to the administration Console

  After entering the user name and the password are page like below

  "Server encountered an unexpected condition that prevented him from meeting the demand.

  The best thing to do is start to the homepage or try the back button of the browser. »

  When I check the logs the error below was given help to solve this problem

  # < 4 February 2016 09:19:06 EET > < opinion > < Diagnostics > < fi100idmdev01.ddc.teliasonera.net > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 48eeba3244cb2662:-2ec07938:152a18f47a2: - 8000-0000000000004111 > < 1454570346095 > < BEA-320068 > < Watch "UncheckedException" with severity "Notice" on the server "AdminServer" released February 4 2016 09:19:06 EET. Details of the notification:

  WatchRuleType: Journal

  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-101020') OR (MSGID = "WL-101017'") OR (MSGID = "WL-000802'") OR (MSGID = "BEA-101020'") OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))

  [WatchData: DATE = February 4, 2016 09:19:06 EET SERVER = AdminServer MESSAGE = [path of module: ServletContext@485939269[app:consoleapp console: / console spec-version: 2.5]] Servlet failed with Exception

  java.lang.NoSuchMethodError: weblogic.servlet.internal.session.SessionInternal.setAttribute (Ljava/lang/String; Ljava/lang/object; V Z)

  to weblogic.servlet.internal.ServletRequestImpl$ SessionHelper.updateSessionId (ServletRequestImpl.java:3048)

  at weblogic.servlet.security.internal.SecurityModule.login(SecurityModule.java:308)

  at weblogic.servlet.security.internal.FormSecurityModule.processJSecurityCheck(FormSecurityModule.java:300)

  at weblogic.servlet.security.internal.FormSecurityModule.checkUserPerm(FormSecurityModule.java:211)

  at weblogic.servlet.security.internal.FormSecurityModule.checkAccess(FormSecurityModule.java:94)

  at weblogic.servlet.security.internal.ChainedSecurityModule.checkAccess(ChainedSecurityModule.java:79)

  at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:82)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2219)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2182)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1485)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Subsystem = HTTP USERID < WLS Kernel > = SEVERITY = error THREAD = ExecuteThread [ASSET]: '2' for the queue: MSGID 'weblogic.kernel.Default (self-adjusting)' = BEA - 101020 MACHINE TXID the CONTEXTID = 48eeba3244cb2662 = fi100idmdev01.ddc.teliasonera.net =:-2ec07938:152a18f47a2:-8000 - 000000000000410f TIMESTAMP = 1454570346094

  WatchAlarmType: AutomaticReset

  WatchAlarmResetPeriod: 30000

  Thank you

  Shaik

  Finally, I am able to access the console

  Thank you guys question solved, but to do a few tests more.

  After removing all the patches, I have an error of config.xml file and errors that I started to comment on these tags and it worked

  once more thanks for the suggestions and you help fast

  Shaik

• Cannot access the page e-mail channels to configure the served user's email

  Hello-
  I intend to use AIA (FP) for custom development of SOA. Foundation Pack successfully installed. The next step - I want to set up the error handling. In order to associate Email addresses with user roles Error Handling - I tired to open the page
  http:// < SOA-Host >: < port SOA >/sdpmessaging/USERPREFS - UI
  
  I get the following error
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
  
  Any thoughts?
  
  Thank you

  Replace with your soa port in the url?
  http://:/sdpmessaging/userprefs-ui

  Ex:
  http://myhost:8001/sdpmessaging/userprefs - ui

  I want to say you used soa or not admin way?

  Published by: Jeremy on January 6, 2011 04:51