Cannot access router page... any ideas

Similar Questions

• Cannot access Admin page, nor showing in Explorer after update to Firmware #26923836

  Hi, I just upgraded to 6.4.2 to 6.5.0

  Before I reboot:

  Cannot access admin page, became a loading bar with the NetGear logo, to receive a connection error message.

  I could see my SIN in Solution Explorer and browse the files.

  I rebooted and now it is happening:

  I get the connection error when tring to access the admin page. -Failure error as if he had nothing to this address. Same thing when I use the IP address.

  I ping the Ip and get an immediate response.

  I found some indications that I should be able to connect in SSH with putty, but it does not work for me.

  The LCD display indicating the right host name and version. I also got a message for the encryption to the startup key.

  Don't know what I can do at this point...

  We have tried to reinstall OS and nothing has changed.

  We have tried to unplug an ethernet, nothing has changed.

  The question has been reassigned to lvl 3. They came into tech mode.

  They discover that one of my 2 hard drives is a not synchronize properly and some corrupted system files. Simply, I removed the HDD and restarted normally. Everything was fine.

  I put the HARD drive bad and resynchronization.

  hope this helps someone else.

  PS, The Netgear Customer Service is good and fast - recommended!

• I use CS5.1 and cannot open it all at once. I get the prompt to get the SC6 JAVA run-time inheritance.  I installed, but still cannot open Photoshop. Any ideas?

  I use CS5.1 and cannot open it all at once. I get the prompt to get the SC6 JAVA run-time inheritance.  I installed, but still cannot open Photoshop. Any ideas?

  Would you please install Adobe Application Manager from the link below, then try again to install the application again:

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager

  ~ Sarika

• Cannot access the page «get modules»

  I had just refreshed my computer and I am trying to reinstall my Add-ons, but I can't access the page of the modules 'get '. I tried all the troubleshooting methods suggested. and still no:
  The secure connection failed

  An error occurred during a connection to services.addons.mozilla.org. The peer certificate has been revoked. (Error code: sec_error_revoked_certificate)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Can anyone help?

  How about you just go to https://addons.mozilla.org/ instead.

  Edit: this is not a Firefox 35.0.1 or any number of version, but with a certificate revoked on services.addons.mozilla.org

  The https://addons.mozilla.org still works fine.

  For playback so you understand how to properly use Bugzilla.
  Bug 1128368 - cert revoked about breaks services.addons.mozilla.org subject: addons

• Cannot access administrator Page

  Coldfusion (6.0UP3) on a Web server from iPlanet on Solaris platform running.
  
  When you try to connect to the Coldfusion Administrator Page (CFIDE/administrator/index.cfm) the errors log receives the following error message:
  
  [1] java.lang.SecurityException: unable to configure CERT for certification approved
  to javax.crypto.b. < clinit > ([DashoPro - V1.2 - 120198])
  .................
  
  I read that the problem could be resolved with a hotfix or upgrade to coldfusion. I can't patch or upgrade of this system. You have any ideas?
  
  

  Determine the path to the latest version of the J2JRE segment that is installed on the web server (note that the name of the directory can change with each new version) by running the following command:

  Edit the opt/coldfusion/runtime/bin/jvm.config file.
  Change the java.home entry in the file from:
  Java.Home=/opt/ColdFusion/JRE to: java.home=/opt/J2JRE_1.4.2_06/ replaced by the path to the most recent segment for example path opt/J2JRE_1.4.2_06/ J2JRE.
  Step 5:Save the file.
  Step 6:Remove the default Java Runtime Environment:
  rm - rf/opt/coldfusion/jre / *.
  Step 7: Restart ColdFusion:
  restart the /etc/init.d/ColdFusionMX

• Cannot access router wi - fi remote intelligent service said router offline.

  I can't access router remotely by using smart WiFi. When I connect it says router is in offline mode. Wrt1200AC. Used to work and now it doesn't. I have an account setup smart wi - fi. I can connect locally on my network. I went to troubleshooting, diagnosis, status and clicked on report. It shows that smart wi - fi service is stopped. How to start the service or connect. Everything else works fine.

  We have exhausted all possible solutions for our final step is to reflash manually its firmware. If all else fails, we will have it carefully studied by our team of level 2. Please send us an email to [email protected] with your file number, community username and link to this post for reference.

  Ann_18678
  Linksys technical support

• BlackBerry Smartphones cannot access web pages

  After accessing web pages without problem, I couldn't suddenly to. When I go to the browser, after you type in a web page, I get the consignment: "this is a problem when trying to render the page.

  I searched on the site Web of Blackberry for a solution without joy.

  If anyone has had a similar problem or could advise me what is going on, I would appreciate it.

  Thank you very much

  Gordon

  You are welcome

  Please solve the thread. Put brand of 'Solution' to the post with the solution.

  Thank you.

• I can receive my email but cannot access Internet to any web page

  I can receive incoming e-mail and I can send emails but I can't access the Internet for any web page. It is with another computer with Vista operating system not this one. Thank you

  Using Windows Live Mail or Outlook?

  For Windows Live Mail:

  The best place to ask your question of Windows Live is inside Windows Live help forums. The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

  For Outlook:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

• Cannot access admin page

  Hello

  I have a unit of the RN102 running v6.2.5 firmware. The problem I have is that after a day or so of the unit in place, I'm more able to access the admin page - it just expires. Everything else still works well, I can still access the Web user interface for other applications on the device (for example. BitTorrent Sync, Plex) then the device has completely locked up to drop off the network.

  By turning the NAS and the new solves the problem for another day or two, and then I lose access to the admin again page. In addition, he shut down using the power button on the front of the unit does not work, I have to pull the power cord to get it to turn off.

  Anyone have any suggestions for how to fix this?

  Thank you

  Sounds like Plex used too much memory and the system has met a low-memory condition.

  You might try rebooting the NAS. Then you should find access to the administration web page.

  The 100 series is storage economic and designed to work both in a limited quantity.

  If you do not use an application for example Transmission then I would turn off.

  There is a newer build ARM of Plex 6.x to plex.tv/downloads that I guess you can try if you want.

• Cannot access the page customize or see the menu button!

  I had two modules different twitter (Twitbin and App Twitter). The first was one that I enabled again, because I wanted to see if it has improved for some time. After restarting my browser, however, most of my toolbars have been on different parameters. I managed to get my bookmarks toolbar, showing once again. However, now:
  -I can click on "Customize" under the tools, but the page appears empty (if any)
  -the orange "firefox" button at the top left disappeared
  -menu button (three horizontal lines) disappeared

  In addition, restarting somehow messed up my manager's Session module. It lists my tabs/windows have saved, but they never load.

  I searched everywhere, but have not found any real answers (page customize and SM have been the most frustrating of all this). I completely remove the add-on twitter, I chose not to use, but it changed nothing about how it was.

  Thank you
  -A

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information. Now, should open a new tab containing your troubleshooting information.

  2. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Cannot access ftp pages

  Hi, I use FF 21.0 and Win XP, sp3. I can't access FTP web pages. Unfortunately since I hardly ever use FTP, I don't know if it's pages, or a setting on my computer. I can't find where a setting in the browser can change my access to FTP sites. Should I turn on a setting on my computer somewhere? I can't navigate to one of the two sites in FF or IE. The two sites I tried to navigate into without success are:

  = > ftp://umaxcare.com

              (safe hardware support site for my scanner to get an upgrade plug-in).
  

  = > ftp://ftp.microsoft.com/services/whql/hcl/win2000hcl.txt

              (microsoft HCL text file)
  

  I get the "unsuccessful" page respective standard errors of loading in both FF and IE.

  Can someone help me please by suggesting if I need to change a setting or to check if these pages still exist?

  Thank you!

  I just tested the pages and you have the same problem. This isn't Firefox, but the pages himself.

• Cannot access router Readyshare

  This topic was preciously posted, but I have still not found no answer. Here's my situation:

  -Netgear model router with USB inserted Readyshare C3000.

  -Windows 7 access Readyshare desktop computer

  -10 Windows laptop already accessed Readyshare. All of a sudden, I get an access denied message saying:

  "Not accessible. You may be allowed to use this network resource. Contact the administrator... A specified logon session does not exist. It may already have ended."

  No error number is attached.

  None of the network settings on the computer have been modified.

  In the file on the PC of 10 window manager I see Readyshare. When I click on it to access the content, I get the above message. He doesn't want a password. It just display the message "access denied."

  As for Googleland, I google the subject and found many discussions, but nothing of this has solved my problem. Don't know where to go next. For now, if I want to transfer files between the two systems, I resort to the old-fashioned copy to and from a flash drive way.

• Computer seems to be connected to the internet but cannot access web pages

  It says its connected to the internet and it can download the automatic updates, but when I open internet explore or mozilla or browser accesses a web page.

  The problem does not change if it connected to a hard line or wireless.

  The computer is a Latitude D620 on windows xp, if that helps.

  What happens when you try?

  Have you tried resetting IE?  (Tools |) Internet Options | Advanced...)

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Cannot access router EA3500 to change settings

  I would like to make a few changes to the configuration of my router, but can't access the configuration screens. I tried Smart Wifi and myrouter.local.  After entering my password, it hangs on "Waiting."... "and I never have to the configuration screens.  What I am doing wrong?

  Hi there, lindsayla18! It is possible that the IP address (192.168.1.1) of the EA3500 may have changed. You try to access the wireless user interface? It is preferable that you access with the cable from the computer to the router.

  Try to get the IP address and the default gateway ('router' for Mac) of the connected computer and use this default gateway to access the user interface.
  Last resort would be to reset and reconfigure the EA3500. You still have to, do it connected to the router.

• Cannot access the page e-mail channels to configure the served user's email

  Hello-
  I intend to use AIA (FP) for custom development of SOA. Foundation Pack successfully installed. The next step - I want to set up the error handling. In order to associate Email addresses with user roles Error Handling - I tired to open the page
  http:// < SOA-Host >: < port SOA >/sdpmessaging/USERPREFS - UI
  
  I get the following error
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
  
  Any thoughts?
  
  Thank you

  Replace with your soa port in the url?
  http://:/sdpmessaging/userprefs-ui

  Ex:
  http://myhost:8001/sdpmessaging/userprefs - ui

  I want to say you used soa or not admin way?

  Published by: Jeremy on January 6, 2011 04:51