Cannot access anything whatsoever.

Similar Questions

• Cannot access anything whatsoever, then blackscreen.

  To play the game of garrys mod my keyboard and mouse randdomly freeze out of nowhere, which means I can't even turn on caps lock, shift, or nothing, but everything seems to work. I can't access anything that either, but everything is still running. then my computer screen, go powersave mode after a few minutes, then I can't do anything, even if then the computer is always on. I have to restart to fix the problem manually, but it often happens

  Please roll back the changes that you have made recently, intentionally or by mistake.

  Also, please remove your mouse and keyboard cable another USB port (if it's a USB mouse or keyboard). Otherwise, you need to maybe test with another mouse and keyboard and see if the same problem surfaces.

  If all else fails, please stop unnecessary services that run in the background and uninstall third-party programs that you use rarely or not at all. Please follow the guide explained to the below URL to stop services that use up system resources.

  http://www.techfleece.com/2011/08/15/how-to-start-stop-or-disable-services-in-Windows-7/

  After the back if the issue still exists.

  Thank you

• Windows cannot access anything WHATSOEVER. Please read and help me!

  The computer goes to market very well and everything, but it then automatically displays "Windows cannot find 'C:\WINDOWS\system32\msspi.exe'. Make sure you typed the name correctly and try again. To search for a file, click the Start button, and then click search." This computer was only randomly we gave, with nothing other than the tower. I was just going to clean by removing unwanted programs and others, but every time I click on Add / Remove Programs, it says "C:\WINDOWS\system32\rundll32.exe Application not found. So I tried to do a system restore, but I don't know if this is possible without a Windows CD (which we don't). And whenever I try to open Firefox, it says open with: program recommended, etc... so I click on Firefox and he invites me to save an exe file on the Local disk, which I do, but it does not open. Whenever I try to open all the files, MSWord or MP3, JPEG files that are saved on the computer, he essentially told me that they do not exist. So obviously, this computer can not do anything. Can someone tell me what is the problem and how to solve? I want to just fees to the computer factory State. Thank you very much!

  The file msspi.exe is probably a malicious who resided once in your system32 folder. Have you had a recent infection and run an anti-malware program? If so, you are experiencing the consequences of infection. (Of course, it is possible that there is another infection on your PC as well.)

  Once you have backed up all your data (ask if you need advice), you can restore your associations, etc. First if all, follow the instructions here:

  http://FILExt.com/FAQ/broken_exe_association.php

  You will need a PC work which is online and one of these USB flash drives to transfer the file.

  The reg. XP referenced on the above page is the same as this one:

  http://www.dougknox.com/XP/file_assoc.htm

  (That would be the ninth link "EXE File Association Fix.)

  Chances are that other associations can be broken. These patches can be found here:

  http://Technorati.com/technology/it/article/remove-after-effects-of-virusesmalwarespyware-and/page-2/

  Really, you should run a full scan with the latest version of MalwareBytes Anti-Malware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  (It is not necessary to activate the full when the choice. This way you will get it for free. The free version should be all you need.)

  And then, if you REALLY want your PC to have his "fresh out the factory condition" (perhaps not necessary, but a valid choice), you must follow the directions of the manufacturer provided. If you need advice, let us know the brand, model and model number of your PC.

  Heh. Just re-read the post. Given that this PC has been given to you, you should really flatten and rebuild, which means that it returns to its original state. I'll leave these instructions (assuming that their computers are not used). You really don't want to take any risk with a PC being used (for example, a PC that is part of the "botnet", spewing more tons of spam, keylogging programs that follow your identities, pornography, etc.).

  Edit: For best results, follow the instructions of Robear Dyer here:

  http://aumha.NET/viewtopic.php?f=62&t=44636

• COMPUTER IS IN MARKET, BUT MY SCREEN IS EMPTY AND CANNOT ACCESS ANYTHING WHATSOEVER

  My laptop HP Pavillion dvr-1200 CTO has a huge problem. It will not display anything other than a model fixed rotation of blocks of colors - it goes from red to blue, to green for a sort of wih shadow grey verticle lines, each for about ten Secord, repeating again and again. You can hear the computer start-up, and you can get to the start page to know when to press enter and when to scan fingerprints; It comes as I can get without seeing. I had the problem for about two months; misfortune is after a week or so, I decided to plug in an external monitor to it and got a complete table, with everything except the display works fine. Unfortunately, hastily excited, I decided to be a graphics driver issue, which would mean simply an update or a new set of drivers. Large. But I accidentally deleted the drivers that I had until I downloaded the new, and the extrnal screen I used erased. Now, I have no idea what to do! Any suggestions...?

  Hello, @postalbbouy

  Welcome to the HP Forums.

  I see you had a problem with the display of laptops, which had bypassed you it with an external. In trying to fix the laptop you removed the graphics driver and have now no poster.

  I want to help you with this. However, with the description of the screen of the laptop looks like you will need to replace. Ways to get the graphics driver, all require a form any Visual to do.

  I recommend you contact the HP support by phone to see what repair or replacement options are available.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks for posting on the HP Forums.

• Discover the apple n update. Now can't access anything whatsoever on iPad - how long before it is fixed?

  Seriously, how long do we wait? I have an iPad and now I can't access anything whatsoever. Cannot enter this program at all. This is not a happy person wrote this!

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• performance issues. I checked something who asked what I wanted at the start. So I can't access anything whatsoever. Any suggestions? THX.

  I went to system security - find and resolve a problem-check performance problems.  I checked something who asked what I wanted at the start.  So I can't access anything whatsoever.  Any suggestions?  THX.

  Hello

  • You receive an error message?
  • What exactly are you can't access?
  • What version of Windows are you using?
   
  You can refer to the following steps:
  Step has.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

  I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

  Hello Brenda,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Client VPN cannot access anything at the main Site

  I am sure that this problem has been resolved in a million times more, but I can't get this to work.  Can someone take a look at this quick config and tell me what is the problem?

  The Cisco VPN client connects without problems but I can't access anything whatsoever.

  ASA Version 8.4 (4)

  !

  ciscoasa hostname

  activate 8Ry2YjIyt7RRXU24 encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  switchport access vlan 15

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.43.254 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address a.a.a.a 255.255.255.248

  !

  interface Vlan15

  prior to interface Vlan1

  nameif IPOffice

  security-level 100

  IP 192.168.42.254 255.255.255.0

  !

  boot system Disk0: / asa844 - k8.bin

  passive FTP mode

  network object obj - 192.168.43.0

  192.168.43.0 subnet 255.255.255.0

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the NETWORK_OBJ_10.11.12.0_24 object

  10.11.12.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.43.160_28 object

  subnet 192.168.43.160 255.255.255.240

  network of the IPOffice object

  subnet 0.0.0.0 0.0.0.0

  outside_access_in list extended access permit icmp any 192.168.42.0 255.255.255.0

  Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel

  standard access list vpn_SplitTunnel allow 192.168.43.0 255.255.255.0

  AnyConnect_Client_Local_Print deny ip extended access list a whole

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

  AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 IPOffice

  IP local pool newvpnpool 10.11.12.100 - 10.11.12.150 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 649.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.11.12.0_24 NETWORK_OBJ_10.11.12.0_24 non-proxy-arp-search to itinerary

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

  NAT (IPOffice, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

  !

  network obj_any object

  NAT dynamic interface (indoor, outdoor)

  network of the IPOffice object

  NAT (IPOffice, outside) dynamic interface

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 b.b.b.b 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  AAA authentication http LOCAL console

  AAA authentication LOCAL telnet console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  http 192.168.43.0 255.255.255.0 inside

  http 192.168.42.0 255.255.255.0 IPOffice

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  IKEv1 crypto ipsec transform-set high - esp-3des esp-md5-hmac

  crypto ipsec transform-set encrypt method 1 IKEv1 esp-3des esp-sha-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto-map dynamic dynmap pfs set 30 Group1

  Crypto-map dynmap 30 set transform-set ikev1 strong dynamic - a

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  map rpVPN 65535-isakmp ipsec crypto dynamic dynmap

  rpVPN interface card crypto outside

  crypto isakmp identity address

  Crypto ikev1 allow outside

  IKEv1 crypto policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 2

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  dhcpd outside auto_config

  !

  dhcpd address 192.168.43.5 - 192.168.43.36 inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  internal RPVPN group policy

  RPVPN group policy attributes

  value of server DNS 8.8.8.8

  Ikev1 VPN-tunnel-Protocol

  username admin privilege 15 encrypted password gP3lHsTOEfvj7Z3g

  username password encrypted blPoPZBKFYhjYewF privilege 0 mark

  type tunnel-group RPVPN remote access

  attributes global-tunnel-group RPVPN

  address newvpnpool pool

  Group Policy - by default-RPVPN

  IPSec-attributes tunnel-group RPVPN

  IKEv1 pre-shared-key *.

  !

  !

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:b3f15dda5472d65341d7c457f2e8b2a2

  : end

  Well Yes, you are quite right on site!

  Asymmetric routing is not supported on the firewall, such as trafficking and out should be via the interfaces of same, in the contrary case, it think it's an attack and drop the package.

  Default gateway on the subnet devices IPOffice should be the interface IPOffice ASA (192.168.42.254), not the switch, if it is a switch shared with your home network. Similarly for devices inside subnet, default gateway must be ASA 192.168.43.254.

  In regards to the switch, you can get a default gateway or the ASA inside or IP interface IPOffice ASA and the needs of return traffic to route through the same path

• Impossible to access anything whatsoever in the Panel, limited access to internet

  Impossible to access anything whatsoever in the Panel, run antivirus, nothing found, limited access to internet too.  Don't know what to do.

  Hello

  1. don't you make changes to the computer before the show?
  2. what happens when you try to access the Internet?
  3. what web browser you use to access the Internet?
  4. do you get the error message?

  Method 1
  Step 1: I suggest to start the computer in safe mode with network and check if you are able to access control panel and Internet.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  Step 2: If you are able to access the Control Panel on safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem. Make sure that you disable also all firewall and antivirus when you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  Method 3
  I suggest you to create the new user account and check if the problem persists.

  Create a user account
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  If everything works well in the new user account, then I suggest you to transfer data and settings to the fixed aid corrupt profile.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-in/Windows7/fix-a-corrupted-user-profile

• My creative cloud app Manager begins immediately the update when it is opened, and it freezes and never ends the update.  So I'm not able to access anything whatsoever.

  My creative cloud app Manager begins immediately the update when it is opened, and it freezes and never ends the update.  So I'm not able to access anything whatsoever.  How to stop the update process, or reload?  I have to reinstall everything?

  Hello

  You have to just reinstall CC app. Please follow the steps mentioned below to solve this problem, depending on your operating system.

  (Mac)

  (1) close adobe all processes in the activity monitor (cloud Creative), synchronization of the base, CC, ccx, services for the desktop application adobe, adobe office, CIB Adobe updater AAM Broker service

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

  (Windows)

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old and delete the folder Adobe application manager

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

• Creative cloud began the download of an update, but stopped after the download of 5 percent. Nothing works now and I can't access anything whatsoever. Help please!

  Creative cloud began the download of an update, but stopped after the download of 5 percent. Nothing works now and I can't access anything whatsoever. Help please!

  Please remove Cloud Creative app using:

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Impossible to access anything whatsoever in the Help menu

  Just downloaded with the monthly plan of creative photography of cloud and cannot access what in the menu help, including updates.

  Hi Julia,

  Please see the links below:

  White cloud creative app:

  Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

  Blank white screen. Sign in | Creative cloud Packer

  New application Cloud Creative unusable: it is empty!

  Creative cloud is empty window why?

  Re: Empty opening creative cloud app

  If the links above do not help, try cleaning remove the creative cloud application and put it back:

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) remove the rest of the files:

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE {to view the hidden AppData folder, files, folders, file name extensions see see |} {Windows XP, Vista, Windows 7.}

  Cleaning tool 3 - run Adobe: http://download.macromedia.com/SupportTools/Cleaner/win/AdobeCreativeCloudCleanerTool.exe

  4 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if this was helpful.

  Kind regards

  Bani

• Cannot access anything in the Start Menu.

  Original title: problems with Start Menu...

  Can Hi anyone help here please... I can access is more things in my Start menu, Control Panel, My Documents. My photos, my computer etc, etc, all died in the start menu. Whenever I click to open these things I just continue to get an error report, I scanned for virus etc but the sweep came clean... Thank you... Jon T.

  Oh heck - here's what I'd do:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and XP stops threatening program.  XP should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display, choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

  Click on the header of column called Microsoft to sort display (by clicking on the column heading in Microsoft) then all the non Microsoft extensions are at the top and easy to see.  They will say 'No' since they are not Microsoft extensions.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.

  You can Google something like:

  Explorer XP crashing

  You must complete your suspect on behalf of adds on.

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, and then restart and try again.  You have disabled the last extension would be suspicious.

  You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list!

• Since I use F10, my Vista PC can not access anything whatsoever

  Hello

  Can anyone help since I use F10 (I backed up all my files) on my Acer Aspire 5315 installed with Windows vista basic and technology from Acer.

  I'm able to use my PC because I can't acess ANYTHING. I've even lost the use of my wireless button and the touchpad, I now have to use my leader nethernet to my router, but now that doesn't work.  I now have to use my laptop to granddaughter. It is a real pain. I have all the windows or acer discs so I can't even start from scratch.  Please can someone HELP!

  * original title - problem no PC since I use F10 *.

  Hi carolrogers

   

  Method 1:

  I suggest to start in safe mode with network and check if you are able to connect properly. Connect the minimum hardware requirements like mouse, keyboard, etc., then check if the problem reappears.

  In SafeMode with networking. you have access to only the drivers and the core files and includes drivers for network and service needed to access the internet or other computers on your network. To start in safe mode with network links - below
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

   

  Method 2:

  You can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

   

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

   

  I hope this helps.

• I got a Firefox 7 automatic update at home. Now, the internet does not work. It "hangs". I can't access anything whatsoever. Why?

  I need help. I can't use my PC at home (laptop) more access to internet using Firefox 7: no contact. Before you can update everything was OK. I received a warning that some versions of Java were not comatible with Firefox 7. Since Firefox 7 did not work, I have updated Java but still the same.
  I need to change to Opera if you can not help me, but I can't find my Internet favorites. Where are they located?

  C:\Users\Your account\AppData\Roaming\Mozilla\Firefox\Profiles\Your default\bookmarkbackups profile.