Cannot burn CD error message says: "Please insertdisc.

Similar Questions

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  Hello ShawnKohl,

  We can also try to go back to a time where he worked with system restore.

  Once this has been done, check the hat of Windows updates are available and hide the audio driver updates that are available.

  System Restore:

  Windows XP - http://support.microsoft.com/kb/306084

  Windows Vista/7 - http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  Updates of masking:

  http://support.Microsoft.com/kb/902992

  Please note that in addition to that, the advice of the previous poster remains true: we want to get the latest audio driver on the system of the manufacturer.

  Best regards

  Matthew_Ha

• document does not accept the signature error message says cannot be signed

  I've set up a digital signature, but when applied to a document he sends it to 'save' and I get an error message saying document cannot be signed.

  I tried cancelling the signing and re compliant it but it still does not work. Suggestions please?

  A G Smith

  Signature must save. You who cancel?

• I am suddenly unable to burn playlists to CD on my MacBook Air. Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  I am suddenly unable to burn playlists to CD on my MacBook Air. I burned a CD only 2 days ago.

  Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  Hi BVBigelow,

  I understand that you are not able to burn playlists in iTunes on your MacBook Air. Fortunately, we have an article (link below) which details a number of steps that can help to restore your ability to burn CDs of troubleshooting.

  12 iTunes for Mac: If you have trouble burning a disc

  Take care!

• I get an error message saying "Windows cannot find config.sys.

  Original title: startup problem
  I am running XP I try to access my Start menu. My problem is that I get an error message saying "Windows cannot find config.sys.
  In search no config.sys happens.
  I'm tring to remove some startup problems
   
  Thank you
  Bob Delfino
  E-mail address is removed from the privacy *.

  Hi Bobdelfino,

  ·         Exactly when you receive this error message?

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try to start the computer by using the last known good configuration, you can check the link for the steps below:

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2: If this does not help, you may need to contact the manufacturer of the computer for technical support options.

  For the other troubleshooting steps, you can check the link below:

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Hope this information helps.

• When I try to send an email to MYOB I get error message saying: "an email session could not be started. Please check your MAPI installation '.

  Error message: a message session could not be started. Please check your MAPI installation - sending email from MYOB

  When I try to send an email to MYOB I get error message saying: "an email session could not be started. Please check your MAPI installation '.

  How can I solve this problem?

  Hi all

  I have a workaround which is a little less boring that the patch "restart the PC": If you get the error where MYOB crashes when you try to send an e-mail, open Task Manager (ctrl-alt-del or right click on the start bar), then go to the "Processes" tab and close all instances of wlmail.exe using the button "complete the process".

  It seems that this error occurs if you have Windows Live Mail opened when you try and send emails of MYOB. If you then close WLMail after that get the error the process seems to never close, so you have to close it manually. If you send all your emails with closed WLMail MYOB it seems to be OK.

  See you soon

• Windows vista sys. error message says need to adobe flash player 9.0 or later. I have this already. cannot run videos from internet

  Windows vista sys. error message says need to adobe flash player 9.0 or later. I have this already. cannot run videos from internet

  Hello

  This can help you:

  Download and run the Flash Player Uninstaller, as Flash can get damaged.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com

• When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  You must download and install the version of Acrobat Mac.

• I am trying to download the trial version of Adobe Audition.  He asks me to connect, I get my username and password and I get an error message saying "we are able to contact Adobe.  If please connect to the Internet and try again. "Needless to say I'm dum

  I am trying to download the trial version of Adobe Audition.  He asks me to connect, I get my username and password and I get an error message saying "we are able to contact Adobe.  If please connect to the Internet and try again. "Needless to say that I'm connected to the Internet when I try to do.  Anyone have an idea what is wrong?  Thank you.

  Please try: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the

  I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the other copy of Lightroom before trying to launch' the problem is, that I can see a copy of the open LR5 and cannot locate the "." lrcat.lock"the specific catalog I want to open the file. I tried to re-boot my computer, but it did not work.

  Thanks Geoff. I was finally able to locate the "." lrcat.lock' of the relevant folder to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. Thank you

• I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Help, please.

  Hello
   
  
  Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
   
  (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
   
  (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  Warning of the BIOS:
  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  
  (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

• Windows Media Player error message says that I don't have the media usage rights acquisition.

  Original title: Windows Media Player

  Am not able to play music in Windows Media Player to the library after the transfer of music from another computer.  Error message says that I don't have the media usage rights acquisition.

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  Cause of the error:

  Windows Media Player uses Microsoft Digital Rights Management (DRM) to protect the rights of content owners who protect their music or video products in this manner. You must have usage rights required to play, burn, or sync protected content.

   

  How to upgrade the DRM license?

  By default, Windows Media Player will automatically attempt to acquire the rights of use in silence unless the server requires some input on your part (for example, registration or tax information). You can disable the automatic rights acquisition. In this case, you will be asked to obtain the rights for any new content that requires them. To prevent Windows Media Player from acquiring rights automatically, do the following:

  a. click on the arrow on the now playing tab, and then click Other Options.

  b. click on the Privacy tab, and clear the automatically check if protected files need to be refreshed check.

  Please note that this setting affects not acquisition of rights of use of online stores.

  Which settings affect privacy in Windows Media Player?

  http://Windows.Microsoft.com/en-us/Windows7/which-settings-affect-privacy-in-Windows-Media-Player

  To upgrade the security for your digital media player component, see:

  The security component upgrade

  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  This page allows you to upgrade the components of security of your digital media player to play the files on your computer.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• My iPod Classic is not synchronized.  error message says file not found

  I've never had a problem syncing my iPod classic.  Yesterday I bought a song at the iTunes Store, and afterwards, when I synced my iPod he removed my entire contents except the song that I just bought.  Error message says cannot be synchronized because file not found.  What should I do?

  First of all, quit iTunes and restart.  Then re-sync your iPod?

  If the problem persists, try disconnecting in iTunes, so that you are no longer connected to your Apple ID.  Your library iTunes music shows still all of your songs?