Cannot access IP Web Browser Configuration Page OfficeJet 8600 Plus

Similar Questions

• Cannot access serives web browser administration console

  Hello
  IAM trying to connect to the web browser essbase administration console.
  "" http://servername: 10080/easconsole/console.html. ""
  
  
  When I click it showing just locate language and when I select language and start nothing happens...
  
  
  no idea...
  
  Thank you and best regards,
  Sri-Oracle.

  A Java web start window should appear after clicking on "launch." Make sure you have a Java installed on your client machine - runtime and it should be available to the user that you are using.

  Kind regards
  Chrystelle

  PS: Java will not be available if the admin connects via another account and install java. Java must be installed using the same user account. If admin access is not available, a temporary is needed

• Cannot access a Web site using Java Script

  Cannot access a Web site using Java Script. I'm not sure what it blocks I use Win 7, Avast free, AntimalwareBytes.
  I get a pop up window with
  Name: mcs
  Location: http://myspeedtest02.windstream.net  
  say "application blocked by security settings, blocking the untrusted application.
  I don't know what it blocks, but suspect it is related to the security of Windows.
  I think that the Java Applet is blocked, but I would like to run this test of speed from my ISP.  I tried to access the website of Google Chrome and IE, with the same result. Nobody knows what this block and how to unlock it?

  This is actually not JavaScript, it's Java.  Despite the name, they are really very very different.

  Java itself can be dangerous, especially if it is not a trusted application.  It is my sincere recommendation that you do not continue.

  If you want anyway, you can go into your control panel, open the Java settings and set it to allow untrusted applications.

• BlackBerry Smartphones connected to the Internet, but cannot open the web browser, facebook...

  My Blackberry Bold 9900 connects to internet with wi - fi and 3 G/edge connection (w / caps) and receive emails, but cannot open the web browser, facebook, twitter, bbm, app world... for the last two days (I think that I have improved some applications). Everyone knows the same?
  Can someone help me pls? Thank you!!

  OK, at least you get the signal necessary for many applications work.

  Please remove your battery while your phone is on, and then replace it.

  Let us know if that helps you.

• After that download site on the internet Web browser says page not found, file 'null' is not found.  Also in the Muse I can't preview the site or pages more. Never had a problem and now I don't know what to do. In Safari and Google Chrome it

  After that download site on the internet Web browser says page not found, file 'null' is not found.  Also in the Muse I can't preview the site or pages more. Never had a problem and now I don't know what to do. In Safari and Google Chrome there is no problem on the internet, but I can't be seen.

  OK, so your last post, it seems the widgets are the cause of the problem. Let's see if we can understand why:

  • Have you tried to create a NEW Widget of emptiness of Composition and which fill with new content?
  • Have you tried a full download instead of only changed files?
  • Also can you check with domain host that send you to the right directory, and whether or not they have made changes to the ftp upload?
  • When you export the site in HTML format instead of FTP download and compare the files that are generated in the HTML folder, they are identical to those published via FTP?

  If this does not help, it would be useful that you could provide us some screenshots of errors you are seeing, you use parameters of publication etc. (you can block-out user name and password for security reasons of course).

  CARI

• Update XP Sp2 to Sp3. cannot access the web page update

  The page cannot be displayed

  The page you are looking for is currently unavailable. The Web site may be experiencing technical difficulties, or you may need to adjust your browser settings.

  Please, try the following: Click the Refresh button, or try again later. If you typed the page address in the address bar, make sure that it is spelled correctly. To check your connection settings, click the Tools menu and then click Internet Options. On the connections tab, click settings. The settings should match those provided by your local area network (LAN) administrator or Internet (ISP) services provider. See if your Internet connection settings are detected. You can configure Microsoft Windows to examine your network and automatically detect network connection settings (if your network administrator has enabled this setting). Click on the Tools menu, and then clickInternet Options. In the connections tab, click LAN settings. Select automatically detect settings, and then clickOK. Some sites require 128-bit connection security. Click on the menuhelp and click About Internet Explorer to determine what you have installed the security force. If you are trying to reach a secure site, make sure that your security settings can support. Click on theTools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0. Click the back button to try another link. Cannot find server or DNS error Internet Explorer I can access other web pages OK.

  Burty,

  See... http://support.microsoft.com/kb/265847 this article has been written about products for which microsoft no longer offers support. Accordingly, this article is offered "as what ' and longerbe not updated

• Cannot access the web page of the wrt54gx router

  I configured my wrt54gx as point of access by disabling the DHCP and assigning static IP address 192.168.0.6. My main router is a wrt310n. My access point works very well when it is connected with a wire to the wrt310n.

  I want to reonfigure the wrt54gx to use it as a main router again. To do this, I am unable to connect to the webpage wrt54gx.

  Any suggestions?

  Thank you

  You should be able to connect to the WRT54GX and configure it from there.  If it does not, simply unplug the WRT54GX of your other router and reset to the default values by using this procedure:

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• WRT54G V8 cannot connect to the web-based configuration page?

  Earlier, I reset my router and was able to use 192.168.1.1 to visit the configuration page based on the web while trying to restore a home network, now that I have a new computer using Windows 7 that can not use the easylink advisor. I was able to get on the page update my SSID and WEP key. But when my wireless devices were still having problems to you connect to the internet, I tried to go back to the page and found that I can't seem to connect, even if my office is able to connect to other websites very well.

  Anyone know what I can do wrong? I use Verizon DSL. I was able to ping to the router and all tests have shown that it was connected fine, but I still can't get on the configuration page and my laptop can't connect to the network. I tried to reset the router again and still nothing. And Yes, I went through several cycles of power. I have also tried to move if the network card on my computer, but the computer said it was impossible to create a card for him, although at the time I had listed as a home network.

  Wireless on 192.168.1.1 connections often fail.  Using the router configuration pages, always use a computer that is connected to the WRT54G.

  If the above does not solve your problem, so here are my other tips to see the router configuration pages:

  You don't need an Internet connection. 'web Pages' of the router are integrated into the router.
  Use Internet Explorer, it usually works.
  JavaScript must be enabled.
  Use a computer that is connected to the router.
  In the non-working computer, temporarily disable your firewall software.

  Point your browser to 192.168.1.1, and then connect to your router. Your username must be left blank. Your password is "admin" (without the quotes), unless you changed it.

  If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.

  Some Zone Alarm users reported that the addition of 192.168.1.1 to their address list "of trust" solved the problem. This trick can also work with other firewalls.

  If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.

  If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.

  If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. A report with this problem and also specify the brand and exact model of your modem (not router) number.

  If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.

  If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system.  The router should work, but you will need to configure your router again from scratch.  If you have saved a router configuration file, DO NOT use it.

  If you still have problems, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

• cannot access the web page of WAP but can telnet

  Can someone tell me why the following configuration won't let me access the web page of the WAP?

  version 12.2
  no service button
  horodateurs service debug datetime localtime
  Log service timestamps datetime localtime
  encryption password service
  !
  hostname EwingWAP
  !
  logging buffered information
  enable secret 5 $1$ z9vV$ M.rY40womPNf7YPOQqC8T.
  !
  username privilege 15 secret 5 careone $1$ nFXA$ ezjkiBAHeboaKYMzB4hpq.
  clock timezone IS - 5
  clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
  IP subnet zero
  !
  !
  Bridge IRB
  !
  !
  interface Dot11Radio0
  no ip address
  no ip route cache
  !
  SSID tsunami
  open authentication
  Comments-mode
  !
  base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
  threshold RTS 2312
  root of station-role
  Bridge-Group 1
  Bridge-group subscriber-loop-control 1
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  Bridge-Group 1 covering-disabled people
  !
  interface FastEthernet0
  no ip address
  no ip route cache
  automatic duplex
  automatic speed
  Bridge-Group 1
  No source of bridge-Group 1-learning
  Bridge-Group 1 covering-disabled people
  !
  interface BVI1
  IP 172.18.86.5 255.255.255.0
  no ip route cache
  !
  default IP gateway - 172.18.86.1
  IP http server
  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivor
  y/1100
  radius of the IP source-interface BVI1
  1 channel ip bridge
  !
  !
  Line con 0
  line vty 0 4
  local connection
  line vty 5 15
  local connection
  !
  NTP-period clock 2860650
  NTP 208.90.144.53 Server
  end

  Hi Jason,

  Have you tried the default user name and password?

  Username - Cisco

  Password - Cisco

  Please try the commands below and let me know how it works...

  en

  conf t

  AAA new-model

  local IP http authentication

  end

  Try to open the WEB GUI by using the configured user name and password...

  Concerning
  Surendra

• Cannot access the web configuration utility - server wrote: level_15_access

  I've been using a Dlink router and wasn't getting any beach on my network, so I tried to configure my router linksys wrt150-n v1.1. I pressed the button reset for 20 seconds, then unplugged my modem (cable) and the router, then plugged in. When I open a browser window and type http://198.162.1.1, instead of open the configuration page, I get a message saying "the http://198.162.1.1:80 server requires a user name and password. "The server said: level_15_access.

  I left the empty user name and used the password default admin, and who does nothing.

  Tried to reset the router on 4 or 5 times without success. Any ideas on what I forget? I did not initially provided with the router Router installation CD, and it is not a downloadable file - I should be able to and have in the past been able to use the default IP address and the admin PW.

  Thank you!

  Try a Hard Reset:

  Hard Reset (aka 30/30/30 reset):

  The following procedure will clear the memory NVRAM and set dd - wrt return to default values:

  • With the power on, press and hold the reset button the back of the unit for 30 seconds
  • Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
  • Plug in the appliance ALWAYS keeping the reset button a final 30 seconds

• N600 ea2700 cannot access internal Web sites

  I have a new router, n600 ea2700, replace a wrt54g2 for this.

  I have an internal Web server configuration, with port 80 redirection http to my iis7 Web with a server static ip address

  I can access my areas outside my internal network (IE my cell phone), but when I type in www.mydomain(s).com (one of them) in my browser on a wired computer or internal wireless I get "cannot display this page".

  I can ping the www.my... and get an answer to my router static ip (internet provider)

  I can type in my static ip of the Web server and get my splash screen for iis7

  I of the wrong with linksys phone and they could not understand, basically saying take the router at staples and get a different model.

  I think I'll ask here before I do it.  I would add that if I put the old wrt back I can't access no problem.

  Any ideas?

  Thank you!

  Sorry I misunderstood your OP.

  This is called "NAT Loopback" and is not available on the Smart Wifi routers.

  Honestly the firmware of the Wifi chip is not designed for custom networks from servers or DNS requirements.

• WRT110-problem accessing the Web-based Setup Page

  I can't access the configuration page based on web for the WRT110 router I have. I am able to make a connection on two computers without the router, but when I add them I get an error message in my browser.

  I tried to access the configuration page based on the web both of my computers and some information were followed by Ecritel.net, but I'm having no luck. I receive the following error message "missed connection: connection to the server was reset while the page is loading." The network link was interrupted for negotiating a connection. Please try again. »

  Any advice would be greatly appreciated! Thank you!

  Actually, I get a different error message now. I made a few adjustments to things like the start menu, which is a problem before. Here is the new error message I received:

  Network timeout Server 192.168.1.1 takes too long to respond. The requested site did not respond to a connection request and the browser has stopped waiting for a response

  Can experience the high demand server or a temporary outage? Try again later.

  Are you unable to navigate to other sites? Check the computer's network connection.

  Is your computer or a network protected by a firewall or proxy? Incorrect settings can interfere with browsing the web.

  Still having trouble? See your network administrator or your Internet service provider for assistance.

  Someone at - it ideas? I searched on the Internet, but nothing I've tried works. Thank you in advance!

• Help, please! Cannot access the web after connected to the VPN

  Hello

  I'm a newbie on Cisco products.  I configured a Cisco ASA 5505 with VPN firewall.  However, I can't access the web after I connected to the remote IPSec VPN.  I also cannot connect to the bands using the intellectual property.  But I can connect to the internal servers in the office with no problems.

  Here is my setup, can someone help please?  Thank you very much

  ASA Version 8.2 (5)

  !

  host name asa

  xxxxxxxxx.com domain name

  enable the encrypted password xxxxxxxxxxx

  xxxxxxxxxxx encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  passive FTP mode

  area of zone clock - 8 schedule

  clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00

  DNS lookup field inside

  DNS server-group DefaultDNS

  Server name 107.204.233.222

  name-server 192.168.1.3

  xxxxxxxxx.com domain name

  inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 192.168.1.0 255.255.255.0

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  interface ID client DHCP-client to the outside

  dhcpd outside auto_config

  !

  dhcpd address 192.168.1.5 - 192.168.1.36 inside

  dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal strategy group xxxxxxxx-sc

  attributes of xxxxxxxx-sc group policy

  value of 107.204.233.222 DNS server 192.168.1.3

  Protocol-tunnel-VPN IPSec

  XXXXXXXXXX.com value by default-field

  xxxxx xxxxxxxxxxx encrypted password username

  Strategy Group-VPN-xxxxxxxx-sc

  remote access to tunnel-group xxxxxxxx-sc type

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  Group Policy - by default-xxxxxxxx-sc

  tunnel-group xxxxxxxx-sc ipsec-attributes

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  call-home service

  anonymous reporting remote call

  call-home

  contact-email-addr [email protected] / * /

  Profile of CiscoTAC-1

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02

  : end

  Hello

  Try adding the following commands

  permit same-security-traffic intra-interface

  NAT (outside) 1 192.168.1.96 255.255.255.240

  Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.

  In this case, these configurations should do the trick

  In order from top to bottom, they would do the following things

  • First remove the pool VPN and VPN configurations
  • Then remove the VPN pool
  • Remake of the VPN Pool with different network
  • Reattach the VPN pool for VPN configurations
  • Configure NAT0 to the new cluster of VPN
  • Remove the old line of the ACL of the configuration of NAT0

  attributes global-tunnel-group xxxxxxxx-sc

  no address-sc-swimming pool

  no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0

  no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240

  Of course you also have the NAT configuration for VPN pools new Internet traffic

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Please rate if the information has been useful if this resolved the issue as mark responded.

  -Jouni

• Firefox 3.6 doesn't open, uninstalled and reinstalled but still cannot open any web browser except IE8

  Firefox 3.6 doesn't open, uninstalled and reinstalled but still cannot open Firefox or other web browser except IE8

  After the Java Update

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)

  Hi - yes even!
  I did nothing else during the last 3 days but now Firefox has decided to install and it loads fine - I have no idea why or what caused it as I have not downloaded one thing - but thanks for the aid application. Regards Terry

• Cannot access the BEFSX41 router Config page Win 7

  Hi, I have a BEFSX41and am not able to access my router from any browser config page I have on my system. I use IE and FireFox and when I punch in the IP address for the router there is just there and about 30 seconds later, says that there is a mistake and that the connection has been reset. It is a 64-bit installation and I also have another computer that goes through the same router, is 32-bit and doesn't have this problem.

  I added a NEW driver for my Realtek NIC and it still happens. Another machine that I have on my network ALSO has a Realtek NIC but can still access the router config page.

  Someone at - it else here has the same problem?

  OK, problem solved. I used a different IP and the problem disappeared, thanks for the help.