Cannot add the Flash disk

Similar Questions

• Cannot add the flash player

  I havde created a simple page, it is divided into two columns
  in a single column, I have just the text in the other, I've added a flash viewer (which works fine) I want to do is to add a flash drive in the Viewer. Pretty simple sounds but when I try it said its impossible to "this change should change the code which is locked by a model or a translator," I am confused, I managed to put the viewer why can't not drive? I tried to insert into another layer same error
  
  any ideas?
  
  Thank you
  
  

  The error is thrown probably because the original poster uses CS3 or
  earlier and chose a check for the Flash version at the insertion of the Flash
  on the model of child page. This control requires an onload event in the body
  tag. The body tag is locked on a child page template. So - the error.

  The solutions are-

  1. don't make a Flash version check, or
  2. apply the Flash on a dummy page, then copy the body tag in the
  model of child page. Then copy the onload call in an editable region to
  the bottom of the page (this combo box must be added to the model,
  and allowed to be propagated to all child pages first).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "Walt F. Schaefer" wrote in message
  News:gjg3q6$RhH$1@forums. Macromedia.com...
  > This message often cannot be taken literally and the indication of the code is
  > Errors in the page. Validation of the page before going any further.
  >
  > --
  >
  > Walt
  >
  >
  > "Mitch5560" wrote in message
  > news:[email protected]...
  > I havde created a simple page, it is divided into two columns
  > in a single column, I just text in the other, I added a flash image
  > viewer (which works fine) I want to do, is add a flash
  > player
  > on the spectator. Pretty simple sounds but when I try it says its not
  > to
  > "this change would require an amendment to the code that is locked by a.
  > model or
  "> Translator" I'm confused, I could insert the viewer why don't not the
  > player?
  > I tried to insert into another layer same error
  >>
  > any ideas?
  >>
  > Thank you
  >>
  >>
  >>
  >
  >

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

  After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

  Babis

  This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. Cannot add the printer network Windows 7 64 bit

     My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

     Hello

     ·         What is the number and model of the printer that you are using?

     ·         How many computers are connected to the host computer?

     ·         You are on a domain network?

     Method 1:

     You can check the items below that explain how to install a printer in Windows 7.

     Install a printer

     http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

     Find and install printer drivers

     http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

     Method 2:

     a. now follow the document below to add the printer to the Windows 7 computer.

     http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

     b. If the steps above does not help try the procedure below.

     We need to change the port and check. Let us perform the steps below to install this printer and check.

     a. Click Start, click Control Panel, and double click on devices and printers.

     b. click Add a printer.

     c. Select "add a local printer.

     d. Select "create a new port". Select "Local Port" as the port type.

     e. in the "type a port name" box, type the address in the following format.

     \\[IP address of the host computer]------[the share name of the printer]

     And then click Next.

     f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

     g. complete the installation.

     For additional help, refer to the article below.

     Printer in Windows problems

     You can also check out the link below that addresses the same issue when you face:

     http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

  8. Cannot add the header HTML - CFWebstore on CF11

     Hello

     I get the error below on a new installation of CFWebstore v6.6 on CF11. I used a previous version of CFWebstore on CF7 and CF9 without problem. Looking for suggestions...

     Cannot add the HTML header. ColdFusion is unable to add the header specified in the output stream. It's probably because you used to define one of the ColdFusion Cookies of Session or authentication cookie. To do this, please use configuration at the application server level. The error occurred on line 213.

     Thanks in advance for any help!

     Gary

     I found this answer:

     To resolve this issue, connect to Coldfusion Admin, go to the memory Variables and uncheck "Disable the update from Coldfusion cookies using tags/functions of Coldfusion." Memorize your settings, and then restart your Web site.

  9. Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

     After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:

     Impossible to turn on the virtual machine with the following error: could not open the disc

     "/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.

     Reason: Broken pipe.

     Anyone's idea what is the problem here?

     How did you move virtual machines?

     Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

     Otherwise try converter

  10. Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

      Hello. I try to add vmknic with frames in my distributed virtual switch.

      I read the vSphere command-line Interface Installation and reference Guideguide:

      "vicfg-vmknic - a-i DHCP"vmk5"

      I see the error message:

      Cannot add the vmkernel nic: a specified parameter was not correct.

      Vim.Host.VirtualNic.Specification.Ip

      What's wrong?

      I tried all the combinations of parameters with the same result.

      Ok! I've found a workaround.

      Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

      1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

      2 remove the VMKernel iSCSI/NFS to the DVS interface

      3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

      4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

      esxcfg - vmknic.pl - Server

      If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

      Enjoy!

      M

  11. Cannot add the new log file for the 11g database.

      Salvation of DBA
      
      I'm not able to add the log file, I receive the error message when the database is added.
      
      SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
      alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
      *
      ERROR on line 1:
      ORA-01505: Error adding log files
      ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
      already a part of the database
      
      SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;
      
      GROUP # MEMBER STATUS
      ---------- ---------------------------------------- ----------
      1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
      1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
      /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
      /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2
      
      Kindly help me to add the new log file to my database.
      
      Thank you
      SG

      PGO

      Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

      Thank you
      Hussein

  12. Cannot issue the open disk

      Hi all

      I have ESXi installed on our server. I received a few VM folders with our test WHAT VM inside our office in europe. Using the vSphere Client I downloaded the files for the virtual machine for the farm data store, but when I try to start the virtual machine, I get one:

      Cannot open disk ' / vmfs/volumes/xxxxxxxx-xxxxxxxx-xxx-xxxxxxxxxxx/VM_files/BASE_VM_xxxxxxxx/xxxxxxxx/theapparentlymissingfile.vmdk ' or one of the snapshot disks it depends on.
      The system cannot find the specified file.

      I have gone through the forums here and on Google and tried several of the corrections proposed such as the removal of the. VMDK.lck file. There was another who proposed changing the vmx file and change the name of the file that is the same as the one I had.

      The file is there, but for some reason, he doesn't see it. y at - there something I am missing being new to VMware. I have to start from scratch, if I can't get these working locally.

      Thanks in advance

      You can download the http://kb.vmware.com/kb/1023856 tool (see "Accessories").

      To convert the virtual disk to an ESXi supported format run

      VMware - vdiskmanager.exe - r 'Digipos book PC SP1.vmdk' t 4 "Digipos book PC SP1 - new.vmdk.

      then download the two newly created files ("Digipos book PC SP1 - new.vmdk ' and Digipos book PC SP1-new - flat hard') on the ESXi host and change the settings for the virtual machine, i.e. to remove the bad virtual disk and add the right pair.

      Please be aware that the resulting virtual disk will have a size of 40GB.

      André

  13. cannot add the new hard drive more than 2 TB on vsphere upgrade 5

      can someone give me a clue? I can't add new greater than 2 TB drive to my vm on my upgraded vsphere 5.0. My data store is 6 TB and already read by vsphere... I create new virtual machine and add the new drive, but it limits again just 2 TB when I change 4 TB, the error message will appear. I recently added my datastore LUN with VMFS5 version. is there a any mistake I made? Please help me this problem is so frustrating me... i need to create new disk 6 TB to my new file server

      Hello.

      You will need to use a RDM in physical Compatibility Mode to achieve. As weinstein5 said, a VMDK cannot be greater than 2-to-512bytes. You can use the OS to spread over several 2 TB-512bytes VMDK, if that's what you really want.

      Good luck!

  14. Re: Satellite Pro A100 - cannot download the Flash player to view the flash animations

      Hello

      I have problems trying to download flash player for my laptop.
      It simply doesn't get it. So I can't watch the videos.

      It drives me crazy.
      I don't ' know much about laptops.
      I tried to recover and still no flash player.

      Hello

      I put t know why you cannot download and install the Flash Player, but you must absolutely visit the Adobe Web site:
      http://www.Adobe.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash&lang=engl ish

      I downloaded and installed this site flash player and it worked!

  15. Cannot find the boot disk

      End 2012 17 "iMac with 1.12 GB Drive El Capitan Fusion running.  When I turn on the iMac, I get a black screen with white text that tells me to insert the bootable disc.  If I press the Option key while powering and I select the Macintosh computer hard drive starts very well.  Any ideas what is happening or what I need to do to solve the problem?

      Sounds like something crashed. See if you can boot to the recovery (command-R on startup) Partition and select disk utility and then run First aid. If you cannot start the recovery partition, chances are that the player broke down.

  16. AppAssure BMR cannot find the Destination disk.

      I am preforming a bare metal restore material disimillar and Appassure cannot find the drive on the target computer.

      Restore dell Poweredge R430 13g. The discs are in a controlled by a H330 PERC RAID 1.

      Is there something I am missing, usually displays the disc without any problems?

      

      Thanks for the support!

      Inject you the Perc controller drivers in the boot cd when it was created? If this isn't the case, then this is probably the issue.  He can't access the storage controller so he can't see the disks.