Cannot issue the open disk

Similar Questions

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. ORA-29868: cannot issue the DOF on a field marked as LOAD index

     When I try to delete a text index I get the message: ORA-29868: cannot issue the DOF on a field marked as LOAD index

     Here are all of the command I use to drop it:

     Start

     ctx_ddl.drop_preference ('"IDX_SO_DST" ');

     end;

     /

     Start

     ctx_ddl.drop_preference ('"IDX_SO_FIL" ');

     end;

     /

     Start

     ctx_ddl.drop_section_group ('"IDX_SO_SGP" ');

     end;

     /

     Start

     ctx_ddl.drop_preference ('"IDX_SO_LEX" ');

     end;

     /

     Start

     -ctx_ddl.unsetset_attribute ('"IDX_SO_WDL" ', 'STEMMER');

     -ctx_ddl.unset_attribute ('"IDX_SO_WDL" ', 'FUZZY_MATCH');

     ctx_ddl.drop_preference ('"IDX_SO_WDL" ');

     end;

     /

     Start

     ctx_ddl.drop_stoplist ('"IDX_SO_SPL" ');

     end;

     /

     Start

     ctx_ddl.unset_attribute ('"IDX_SO_STO" ', 'R_TABLE_CLAUSE');

     ctx_ddl.unset_attribute ('"IDX_SO_STO" ', 'I_INDEX_CLAUSE');

     ctx_ddl.drop_preference ('"IDX_SO_STO" ');

     end;

     /

     Drop index "ACQUISITIONS." "" IDX_SO ".

     When I try to get command of the force

     ALTER INDEX "ACQUISITIONS." "' IDX_SO ' DROP FORCE

     I get the message:

     ORA-14004: lack of keyword SCORE

     I don't know how to get this table partitions

     Can you advise how to find partitions?

     or how to remove the particular index successful? This is a test environment.

     I run 11.2 under windows.

     Thank you

     It looks that it is locally partitioned index, so "alter index" will not work without a partition name. But you can try simply

     DROP INDEX FORCE;

     If this does not work, try to restart the database and repeat the index fall. Do not use FORCE unless you have to.

     If it still does not work, you will need to login as SYS and run

     ctxsys.ctx_adm.mark_failed ("", "")

     that resets any clue to 'FAIL' status and allow to delete the index (even once, do not use FORCE unless you have to).

  8. AppAssure BMR cannot find the Destination disk.

     I am preforming a bare metal restore material disimillar and Appassure cannot find the drive on the target computer.

     Restore dell Poweredge R430 13g. The discs are in a controlled by a H330 PERC RAID 1.

     Is there something I am missing, usually displays the disc without any problems?

     

     Thanks for the support!

     Inject you the Perc controller drivers in the boot cd when it was created? If this isn't the case, then this is probably the issue.  He can't access the storage controller so he can't see the disks.

  9. Cannot add the Flash disk

     Hello

     I came into work this morning to find one of our servers in a State that won't start plu.

     This virtual server is hosted on an ESXi 3.5.0 123629 server with two data warehouses.

     The following error occurred when trying to start the server.

     Please check that the path is valid and try again. Cannot open disk 'path to the file DEVSQL1_1 - 000001.vmdk' or one of the snapshot disks it depends on. Reason: The system cannot find the specified file.

     When you browse the data store, I could see the vmdk file.

     I learned later that the DEVSQL1_1.vmdk file has been moved to the another data store.

     Unfortunately, at this time, I removed the hard drive that was pointing to the file - 000001.vmdk if I could add a new hard disk that points the moved file from DEVSQL1_1.vmdk.

     Server started the first pop, except that the data stored on the disk problem are old.

     At this point, I stop the server and moved the DEVSQL1_1.vmdk file to its original location. Then, I removed the disc newly added and tried to add a hard drive pointing to the original DEVSQL1_1 - 000001.vmdk. When you do this I get the error "object reference is not set to an instance of an object" and I am unable to go further.

     When open the Snapshot Manager, I am unable to see relating to this disk snapshots.

     Anyone know how I can join the DEVSQL1_1 - 000001.vmdk disc in order to start the server and also have access to current data?

     Thank you very much

     Glen

     Glen - I don't think we should use this DEVSQL1 - 000001.vmdk snapshot

     I have no evidence that it has been used in the history of this virtual machine.
     It does not fit to the size of its parent disk.

     Do you remember if DEVSQL1.vmdk has been developed in the history of this virtual machine?

     Edit the vmx and change

     scsi0:0. FileName = 'DEVSQL1 - 000001.vmdk ".
     TO
     scsi0:0. FileName = "DEVSQL1.vmdk".

     It was also the State used when the machine virtual last started successfully.

     Honestly, I was a little surprised when you found this DEVSQL1 - 000001.vmdk

     You have an idea about this?

     After editing the vmx file the VM must start - when starting carefully inspect the condition = if it is out of date turn off directly.

     I doubt you'll see an out-of-date status - but if the first disk is expired I must expand the snapshot - that would be a bit strange

  10. Cannot find the boot disk

      End 2012 17 "iMac with 1.12 GB Drive El Capitan Fusion running.  When I turn on the iMac, I get a black screen with white text that tells me to insert the bootable disc.  If I press the Option key while powering and I select the Macintosh computer hard drive starts very well.  Any ideas what is happening or what I need to do to solve the problem?

      Sounds like something crashed. See if you can boot to the recovery (command-R on startup) Partition and select disk utility and then run First aid. If you cannot start the recovery partition, chances are that the player broke down.

  11. Cannot resize the virtual disk, the virtual machine by using a «child» vmdk file

      Release: VMWare workstation 9

      SE host: Windows 7 64-bit

      Screenshots below.

      I want to resize my VM from 50 GB to 100 GB.

      It seems that VMware workstation 9 uses a child for my VM vmdk.  In my case, using its "Windows Server 2008 R2 x 64 - 000001.vmdk" for its virtual disk file.  The correct file should be "Windows Server 2008 R2 x64.vmdk", I think.

      There are currently no snapshots registered for this virtual machine, I see.

      The virtual machine works well as is, but I can't resize the disk without the VMWare gui, saying I should be perform the operation on the parent vmdk file.

      It seems that I do run a snapshot that is not really a snapshot?  How to merge with the older files - Sxx.vmdk to 0000xx - Sxxx.vmdk

      I also tried to use the command line tool to manually resize the vmdk parent, but I get permission "access denied" errors.

      Kind regards

      Matt

      -------------------------------------------

      Parameters of the HARD disk:

      

      Error:

      

      Files:

      

      He no snapshots are displayed in the Manager of snapshot with the check box 'Show AutoProtect snapshots' verified then the snapshot is an orphan and the best way I use normally to fix this if I want the contents of the snapshot of orphan to be among the basic disk is with tab of the virtual machine in VMware Workstation GUI closed I simply delete the .vmsd file and then open the virtual machine tab in the VMware Workstation GUI and cover and immediately remove a snapshot in the Snapshot Manager.  This will force the orphan snapshot to merge with the parent disk.  Then to clean I still remove the .vmsd file and orphans, .vmsn and .vmem file.

      Note: Before the procedure you have a good backup of the virtual machine in case you accidentally mess something up.

  12. Satellite A100 - cannot find the recovery disk to restore to factory settings

      Hello
      I hope someone can help out me?

      I have a Toshiba Satellite A100, model PSAANA-04E005 under Windows Vista Home Premium, Service Pack 1, 32-bit. I am wanting to sell, but have all my programs stuff etc I want to erase files and be able to convey simple with system also when I bought. Memory (purchased January 2007) gave me a Toshiba Recovery with this power drive do something if I needed it's of course is not the case to be foundI.

      Is there anyway I can fix this? All I can download etc to do this?

      Thanks heaps

      Hello

      If you n t find the recovery disk more and you want to restore the original settings, ask an authorized service provider. Guys can put in order a new disc of recovery for you.
      You have the address of the guy?

      Alternative, you can also sell the laptop without recovery disks. Just wipe the HARD drive before selling it with the HARD drive like s boot cleaning tool Darik and nuke or some other program.

      But I think you get a better price if it comes with recovery disks ;)

  13. Satellite L500 - 19 X - cannot use the recovery disk

      Well I had this phone two days ago and he used once after installing fire fox and my mobile to wide band of the driver and going to start and find it of going to happen.

      I tried SafeMode (three) and repair and all I got was a screen black with the cursor upward where it should have been a language screen (I used the recovery disc supplied with the notebook) so anyway, after finding out that I wasn't going to be able to fix it, I tried to install , but of course, this does not work, or so I put my XP 64 bit OS on and has perfectly worked, then I updated (using my own upgrade windows 7) and that works fine no problem, so I tried again with the original windows 7 comes pre-installed on the hard drive on the laptop and everything went find until she starts the installation of the driver or updates (I not 100% sure on this but it or after the installation of face recognition.

      Then it stops it of self down and boots back up to automatically restart and asking me if I want to repair due to a bad start, so I did the repair boots back to the top and still says I need to fix and can't find anything wrong and carries on in this circle.

      Now, I was told it could be the registry or there is a problem of graphics, I get pretty tired of having to install/reinstall/format this laptop.

      So if there is anyone who knows of what is wrong or what to do or whether it should be returned to fix, which will be very useful.

      I thank everyone in advance.

      Happy new year :)

      Hello

      Well, I think that it of really difficult to say what is the reason. Maybe the recovery disk is noisy or the files corrupted it.

      At the moment, I can t imagine what it s a hardware problem because other windows drive work properly.

      In your case, I would try to install Windows 7 from a Microsoft disc and then see what happens. If it works properly and that you can install all drivers & tools you need to order a new drive Toshiba Recovery directly.

      Good bye

  14. Re: Satellite L300-10 q - cannot install the recovery disk with XP SP2

      Hello

      My laptop started giving problems (slow start & suspended inbetween) so I tried to re-installation with installation disk but recovery whaile there ask lang. & confirmation of removal of data and after the installation of minutes collapsed & turn in DOS (X :) for admin.

      When I restarted labtop it shows Bootmgr has failed.

      So I contact customer Service & they replaced the HARD drive with new, but still the same problem.

      I even tried to install XP SP2 after copying the files, it displays HARD drive not found.

      Pls help

      L300 - 10 q series

      Pls advice also how to check Windows XP is 32 or 64 bit?

      Thanks again

      Alvares

      If you try to install your laptop computer with the Microsoft installation disc, you need the SATA drivers. You can find it on the Toshiba site.
      You must load the drivers of an external floppy drive or you integrate into a new CD with nLite (www.nliteos.com).

      For the recovery disc you n t need these drivers because they are already on the disk.
      If you get the same problem with the recovery disk, you should check your disk with Drive Fitness Test (Google is your friend).

  15. Equium M50 cannot read the recovery disk

      I have a fairly old Toshiba Equium M50 - 164. I lost a few configuration etc files and wants to rest to factory settings.
      I have the recovery disk, however, the reader does not read it. I tried other discs and that they is not read.

      Any suggestions? Thank you

      And what is with the operating system?
      Different discs are readable on operating system?

  16. Cannot change the HARD disk parameters in the Bios on Satellite A200

      I can't change the hard disk parameters in the bios for my satellite A200-1The
      This bios does not support changing the parameters of the hard disk for example SATA to IDE?
      BIOS version is: 5.6

      AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

      I put t understand why do you think you can use IDE mode. What you want to do exactly?

  17. Cannot access the HARD disk drive HARD - Satellite P300 recovery

      Hi all

      I want to perform a Toshiba product recovery, using the partition on the HARD disk. I did it before and no problem.

      But when I press F8--> computer repair--> selection language--> then I have to select a user (Administrator / my name/guest) when I select the administrator, it says that my account has been disabled, when I select the user with my name (Kenneth) he continues to the menu where I can choose the different options for recovery. If I select the product Toshiba blah blah thingy a screen comes up saying it can't find 01 HARD drive. I did nothing with the partition containing Vista.

      My guess is that I need to log in as an administrator, which is impossible. My user account in Vista is a Director,

      Can someone please?

      I use a P300

      Best regards
      Kenneth

      You have made changes on the second partition where is placed folder HDDRecovery?

  18. Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

      I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

      How can I fix my computer!

      Any help would be greatly appreciated.

      Have you tried to format the HARD disk until you try to use the recovery disk?
      Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

      But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

  19. Satellite A110: Cannot order the recovery disk - where to get a

      After some problems with a virus, I need to restart the system.
      I tried with the Windows operating system from another computer, but the internet does not work, I can't ' install the drivers of wright.

      Where can I buy the recovery disk? Toshiba support replied, they do not have it because the computer is too old (2006). Maybe someone can send me the recovery disk?

      Help, please

      Hello

      I guess that you have contacted the ASP in your country, and they said that the recovery disc can be pronounced, because it is no longer available.

      Well my friend, this is bad news... seems you can not order.
      In this case, you will need to install the OS by using the Microsoft Windows disk and then you can download all the drivers from the page of European driver Toshiba Toshiba.

      Good bye