Cannot add to the second VM so once added to a machine virtual of RDM

Similar Questions

• Cannot add to the inventory if virtual machine running on the other guests - iSCSI and VMFS5

  5.5 ESXi hosts free standalone version

  iSCSI mounts with multiple paths - relatively new unit with more modern hardware

  CHAP not used

  I'm running a few hosts in order to climb the same iSCSI data stores. The iSCSI LUN is visible and editable by all hosts. If Host1 is to map the iSCSI LUN (VMFS5) and a VM is powered, Host2 can add that VM to the inventory. It's possible with NFS iSCSI for a reason any. This is for a specific reason? Only when I turned off the virtual computer can I add it to both hosts. Other that just lock files are placed in the directory, I missed something related to the lock?

  From now on, adding new esxi hosts does not allow me to add existing virtual machine, less than the voltage first. Once again, NFS does, iSCSI, this isn't. Any ideas?

  It is not specific to ISCSI but rather to the use of VMFS. NFS has no awareness VM VMFS is and why it is not possible to do that with iSCSI / VMFS. There is a lock on the disk for each virtual machine of (race), and that's why the second host is not able to add this host to its inventory. With vSphere HA, this lock is released when a failover should occur.

• Cannot add to the vCenter VM inventory

  Hello.  I found the file for a virtual machine on one of our data warehouses.  I don't see the virtual machine in Virtual Center.  When I try to add to the inventory, I get the following error:

  "A virtual machine or a model having the samename is already registered.  Server error: the specified key, nam or ID already exists. »

  The vmware.log file has these entries

  07:53:06.529 May 21: vmx | Client SOCKET connection 1 closed
  07:53:06.529 May 21: vmx | vmdbPipe_Streams: cannot read

  Is there something that I am missing?  Is it possible to add the virtual machine to my inventory?  Thank you in advance for the advice and help!

  Shayne

  have you tried restarting your vCenter Server Service?

• Disconnected ESX host cannot add to the CR

  It started with me being unable to power on a virtual machine that I created because of "Insufficient resources to meet the level of failover configured for HA" which is great because that's how to configure HA.  I tried to reconfigure the AP to the host by double-clicking on the host and select this option.  Once I did that it failed about 30% with "an error has occurred while setting up the HA Agent on the host" and the networking page disappeared from the configuration tab similar to what a lot of people reported during the upgrade, I think an earlier version.  This is not the case, I did not update anything.  Then I restarted service service mgmt-vmware restart and the ESX host disconnected from the VC altogether.  I can't use the VI client to connect to the host in question, but I am connected via the service console. All VM and the host not to requests ping and everything works. I've disabled HA and DRS and tried to add new ESX host that has not worked.

  Any help is appreciated.  Thank you.

  I found this article that has the same symptoms as you.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004451

  Check if your esx.conf file is corrupted. Follow the directions in the KB article to restore or recreate.

  Arnim - van Lieshout

  -

• Cannot add to the youtube search bar

  I am trying to add youtube to search, what he says that he can not find the plugin, all other Internet sites works very well... anyone else having this problem? How can I solve this problem?

  Copy this text into a file youtube.xml and copy this file in the searchplugins folder worked for me to see the search engine in the search drop-down list engine.
  
  You must create this folder searchplugins.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• I can see, but cannot add to the family calendar sharing. What I am doing wrong?

  My daughters iPad and iPhone don't allow him to add to our family calendar. She can see the calendar. I tried a reset and disconnection of the two devices. It works on devices of my son.

  Maybe she got the permission read-only?

  Read here: iCloud: overview of calendar sharing

• Cannot add to the target FPGA project

  I installed labview 2010 with en FPGA in real time

  In MAX under hardware, I see RIO0 under RIO devices.

  I also installed NI - RIO3.0, that I can see in MAX.

  When I try to add my FPGA PCI-7831R target in my project I don't see not all FPGA targets.

  How can I add my PCI-7831R to my project?

  LabVIEW FPGA and real-time 2010 require NEITHER RIO 3.5.1.  NOR-RIO 3.0 won't the good support for LabVIEW to create targets in the project, even if the FPGA will be detected in MAX.  You can install OR-RIO http://joule.ni.com/nidu/cds/view/p/id/2144/lang/en3.5.1.

• Cannot add to the placed Images Alt tags

  I develop a flyer to be distributed in PDF format, and our demand is that he is 'Section 508' compatible, that is readable by a screen reader. I am trying to add tags alt on images in order to meet this requirement, but when I go to object -> Object Export Options and click the ALT text tab, the dropSource text Alt is dimmed and does not allow me to do something.

  Does anyone have an idea of what's not here?

  This works for me in the latest version of InDesign CC.

  Version of InDesign? Computing platform? What file format is the image?

  Have you tried to restore your InDesign preferences? Here's how:

  Troubleshooting 101: Replace or 'trash' to your InDesign preferences

• Cannot add to the MP3 download Site

  I am a real novice things Dreamweaver and tech - a writer of humor with a Web site. I learned enough it is up and running, change the content on a regular basis, etc. (it will not be won no prize design)...
  
  But I worked on a music project and I have a track ready to release into the world. So I wanted to put in simple download... saved to as an MP3 via iTunes... downloaded on my site... Then I went to the websites of others with music downloads, "given the code"... Ended it very simply use the link text, ala < a href >, which helps to establish links with the MP3 (which seems to work in other sites...)
  
  However... When I try this, I get the error 404 of shit code. I tried to add one of the basic codes 'target' in the link as well... Did not work.
  
  I'm confused, but have the idea that I'm missing something here and something quite simple...

  As I said, try the RAW DATA.

  And check out this reference: http://www.personal.psu.edu/wrc2/macftp.html

  O'Chief says:
  > I have never used DW as an ftp server... I can look into the issue. Although the
  > Binary mac II granted the ferry, most of the files I download simply as "text".
  > and it adds nothing - then perhaps something like "raw data".
  > don't be...
  >
  > I will look into those things that I can - have to pay attention to
  > payment of some concerts soon. I'll mark the message as a 'response' and
  > indicate that I have solved when I do. But this can be opened for a
  > bit...
  >
  > I guess I can search and understand the ftp of dreamweaver. I am
  > a little green and have not looked for him - just started using an ftp server, I
  > had on my system

• InDesign cannot move to the second monitor after upgrade, help!

  I wish that I didn't had not updated today, as I am in the middle of a newspaper deadline and so TOTALLY DIFFERENT interface! AAARGH! And Adobe won't let me come back to the previous version!

  But the worst thing is, I can't move the InDesign window for my big screen from hauptwerk. Can anyone help?

  Go to Preferences > general and uncheck "Show Start Workspace when no. Documents are Open.

• Computer Windows XP cannot connect to the gateway of media converter where as Linux machine can.

  In my office, we have 2 internet connections in the 1 come from media for Cisco router converter and then switch and 1 other comes through router dlink Media Converter and then to the same switch since 1 connection uses the gateway 1 and another 2. In this scenario when the system windows xp or Linux system if uses gateway 1 net will properly and in a way even when windows xp system attempts to use gateway net 2 will come not wat is not here in this scenario pls help me...

  original title: network problem

  Hi Manas,

  Since you are still facing problems, you can ask your question in the Forums TechNet's Windows XP for assistance.

• Questions about the allocation of multiple NETWORK cards in a machine virtual Windows XP Machine HOST/NAT or bridged?

  Hi all

  That is the situation. We have a Machine physics WindowsXP with 5 CARDS, all with static IP. Only be connected to the internal network without physical Internet connection is used.

  Map NETWORK 1 has a 10.34.78.241/255.255.255.0 IP Gateway 10.34.78.2

  Map NETWORK 2 has an IP 192.168.22.242/255.255.255.0

  Map NETWORK 3 has a 192.168.100.241/255.255.255.0 IP

  Map NETWORK 4 has an IP 172.27.254.240/255.255.0.0

  5 NIC has an IP 192.168.242.10/255.255.255.252

  I used VMWare Converter Standalone to do a P2V PC, which works well with the latest version of VMWare Workstation. All were brought to the course successfully. The virtual machine has 5 Networksas by the XP Machine of origin.

  I built a Win7 Machine with 5 physical NETWORK interface cards, I suppose to replicate the Windows original XP Machine, I need configure the static IP address of the new NICs as shown above and configure cards NETWORK the VM 5 HOST mode and use the virtual network Editor

  to adapt the VMS NICS? Or is there a better way to do it?

  Cheers for any help and advice that can be provided...

  If I'm wrong, you should be able to create a Bridged (vmnet) network for each physical card. Make sure that one (which is created by default) is mapped to a physical NIC dedicated rather than automatic.

  André

• Add the signature field to the second occurrence of two words (nieme Word) on the page

  
  I have a script that searches for two words ("APP ENG") on a page and adds a digital signature field.

  The trick is that there are two occurrences of these words and place the script in the field of digital signature on the first ocurrance of the two words.

  
  I need the digital signature script to add to the second occurrence of these two words.

  There was a counter added the script, but this place then the field on the word ("ENG"), it might have to do with the meter to count one word instead of two.

  
  If someone can help me to modify the script to count the words and the occurrences of two words instead of one word it would be most appreciated.

  Script as follows:

  
  var ckWords; pair of words to test

  var number = 0;

  numWords = this.getPageNumWords (0); number of words on the page

  loop through the words on the page

  for (var j = 0; j < numWords-1; j ++) {}

  get the pair of words to test

  ckWords = this.getPageNthWord (0, j) + ' ' + this.getPageNthWord (0, j + 1); test words

  If (ckWords == "ENG APP") {}

  Count += 1;

  If (count == 2) {}

  var q = this.getPageNthWordQuads (0, j);

  convert quads in the rotation by default user space

  Userspace used by links

  m = (new Matrix2D).fromRotated(this,0);

  mInv = m.invert)

  r = mInv.transform (q)

  r = r.ToString)

  r = r.split(",");

  var m = this.addField ("EngSignature", "signature", 0,

  ([r [0], [1] r, r [2], r [5]]) ;

  }

  }

  }

  Thank you.

  You must use the left coordinates of the first table and the right of the second table.

• Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

  Hi there - first post here, so please be nice :-).

  We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

  I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

  Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

  Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

  If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.

  Concerning

  EFIN.

  Do you get the same error when you try to add the network adapter by using the command line?

  1. esxcfg-vSwitch - L vmnic1 vSwitch0

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Cannot add second child to StackPane several times

  Hello
  
  I have a StackPane table, which is filled with two ImageViews. First ImageView is a single image, second ImageView is the same for each StackPane:

         StackPane[] cards = new StackPane[gisView.length];
          for (int i = 0; i < cards.length; i++) {
              cards[i] = new StackPane();
              System.out.println(cards.getChildren().add(gisView[i]));
  
  System.out.println(cards[i].getChildren().add(topCard));
  
  System.out.println(cards[i].isManaged());
  
  System.out.println(cards[i].getChildren());
  
  }
  
  
  
  
  
  The problem is, that the second ImageView - topCard, is added only to first/last StackPane even I added it to every StackPane in cards. 
  
  - both add() methods return true, as well as isManaged() method. 
  
  - addAll(E...) doesn't work either even it returns true too. 
  
  - I checked the errorProperty for every Image and there's no problem with loading the images. 
  
  - both ImageViews do get added to StackPane inside the for loop, but there's only one ImageView in StackPane outside the for loop.
  
  
  
  I hope it's some trivial issue that I just can't spot.
  
  
  
  Edited by: user10869786 on May 24, 2012 6:10 AM 

  A node can be a child of a node at a time.