Cannot apply the patch due to the error of the applet

Similar Questions

• Cannot apply the new theme

  I work in Captivate 8 and I had 3 themes work interchangeably in CPTL file. I changed the theme and then saved the file CPTL and now I get an error message that it cannot apply again theme. Is there a way to fix this?

  This phenomenon happens only for a single file or all files cptx whereby you try to apply a new theme?

  If it is only one file, which probably means that it's corrupted. If this is the case for all files, try the usual steps to erase the corruption of Captivate:

  • Clear the cache
  • Update the Preferences folder (there is a file in the tools subfolder in the CP installation folder) that takes care of it)
  • Since the second bubble clears all custom items, take a look on: Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

  When you have installed the patch to CP8, upgrade to 8.0.1.242, did you delete folders preferences and page layouts?

• cannot apply the workspace of lighting effects because the disk is not available. I use Photoshop cc 2015 on OS 10.11.3

  I use Photoshop cc 2015. When I go to render the lightig effects, I get a message saying 'cannot apply lighting effects workspace because the disk is not available. I'm running on OS 10.11.3 system

  Any ideas?

  Hi Mary,

  Please take a look at the following link: Optimize performance Adobe Photoshop CC and try the steps.

  Once done, see if you still get the same error.

  Concerning

  Tanuj

• Cannot apply the update to Acrobat DC

  Hello

  Please note that this is NOT a question about the upgrade of an earlier version of Acrobat FOR Acrobat DC. I have successfully upgraded to Acrobat DC (volume, track classic, local, i.e. non-cloud, installation license), and it works well.

  It IS a question on the application of a patch/update to Acrobat already installed domain controller. There is a patch available to update Acrobat DC of the current v15.6.30033 to v15.6.30060 of 'classic' track. This update fails with "error 28000, Installation of the Acrobat licensing Module has failed."

  Googling brings up a lot of mentions of this error when you try to upgrade an earlier version of Acrobat (Acrobat X or XI) in Acrobat DC, but I can't find anything about this error appears when you apply a patch/update. Please note that I have many installs of the domain controller that have updated to v15.6.30060; only, many have failed, so I am confident that this isn't a problem with the patch. All PCs are fully Win7 enterprise, SP1 patches.

  What I've tried so far: I deleted all the previous versions of all Adobe products from the computer, including files and registry entries, and I uninstalled and reinstalled Acrobat DC. I disabled the antivirus as he attempted to apply the failure 15.6.30060 patch. Manually, I downloaded and tried to apply the 15630060.MSP patch. I ran anti-virus and anti-malware analysis, negative results and I have run Chkdsk and CCleaner.

  I can't think of anything else to try and would be very grateful if anyone can suggest something that might help me to overcome this obstacle.

  GaryK

  For any future reference - Mohd Amish came up with a fix. Please note the specific circumstance: If you already have Acrobat installed DC updates fail, try this: start Acrobat DC. Rename the OOBE folder in \Program Adobe OOBE. Bak. Try the update. If it works, you can remove the old OOBE folder.

• Cannot apply the writing! Problem reading this document (16) Acrobat 9 pro

  I am applying the redaction sensitve data. I go through all the steps, mark it to reaction etc... but when I click on 'apply writing', I get the error message "there was a problem reading this document (16). I can't find an answer to this anywhere!

  The file that I use comes from a CD of our retirement administrators sent me. There are no restrictions on what I can do with the files.

  I tried this on 3 different computers, by using Acrobat 10 Pro and Acrobat 9 Pro (with latest updates) and I still get the same error message. Even when I extracted a single page, rename it and try to expurgate manually (without using search and redact), I still get the same message.

  Any ideas?  I really need to redact social security numbers!

  Thank you

  I using windows 7 pro if that helps...

  It's probably a corrupted file. Try to print to the PDF printer and then

  drafting of the new version.

• Cannot apply the update of KB2895237

  Hello-

  Windows Server 2008 R2 SP1

  I met with the next issue https://support.microsoft.com/en-us/kb/2895237, but I can't apply this update. Installation process hangs just without any error.

  Process monitor shows me that this process creates / puts end threads all the time, but nothing else. Just create/close etc. I tried to run it from the administrator, but go the same behavior. I have a server that has a lot of IO. It hangs once a week...

  Image of process monitor

  Dump information:

  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80001afa100
  GetUlongFromAddress: cannot read fffff80001afa1c0
  0000000000000030 non paged pool
  
  CURRENT_IRQL: 2
  
  FAULTING_IP:
  Rdbss! RxTimerDispatch + 49
  fffff880'03bb05e9 45395830 cmp dword ptr [r8 + 30 h], r11d
  
  CUSTOMER_CRASH_COUNT: 1
  
  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER
  
  BUGCHECK_STR: 0XD1
  
  Nom_processus: System
  
  ANALYSIS_VERSION: 6.3.9600.17336 (debuggers (dbg). 150226-1500) amd64fre
  
  DPC_STACK_BASE: FFFFF88001E94FB0
  
  TRAP_FRAME: fffff88001e8d250-(.trap 0xfffff88001e8d250)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff88001e8d410 rbx = 0000000000000000 rcx = fffff88003bcba00
  RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88003bb05e9 rsp = fffff88001e8d3e0 rbp = 0000000000000000
  R8 = 0000000000000000 r10 = 0000000000000082 fffff88003bcb9b0 = r9
  R11 = 000000000009a34b r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl nz na po cy
  Rdbss! RxTimerDispatch + 0 x 49:
  fffff880'03bb05e9 45395830 cmp dword ptr [r8 + 30 h], r11d, ds:00000000'00000030 =?
  Reset the default scope
  
  LAST_CONTROL_TRANSFER: from fffff800018bc1e9 to fffff800018bcc40
  
  STACK_TEXT:
  fffff880 '01e8d108 fffff800' 018bc1e9: 00000000' 0000000 a 00000000'00000030 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
  fffff880 '01e8d110 fffff800' 018bae60: fffffa80 ' 19a86c58 fffffa80 '19a86b50 fffff880' 01e65180 fffff880 ' 01e8d4c0: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '01e8d250 fffff880' 03bb05e9: fffff880 '01e8d4c0 fffff800' 01807b7f 00000000'00000001 00000000'00004200: nt! KiPageFault + 0 x 260
  "fffff880 '01e8d3e0 fffff800' 018c816c: 00000000 ' 00000000 fffffa80 ' 1ad03ef0 00000012'40 c 30000-00000000'00000005: rdbss! RxTimerDispatch + 0 x 49
  fffff880'01e8d430 fffff800'018 c 8006: fffff880 '03bcb960 00000000' 0e7add82 00000000'00000000 00000000'00000000: nt! KiProcessTimerDpcTable + 0x6c
  fffff880 '01e8d4a0 fffff800' 018c7eee: 00002277' c5813571 fffff880 '01e8db18 00000000' 0e7add82 fffff880' 01e685c8: nt! KiProcessExpiredTimerList + 0xc6
  fffff880 '01e8daf0 fffff800' 018c7cd7: 000008c 0' 6957dfc1 000008c 0' 0e7add82 000008c 0' 6957dfd8 00000000'00000082: nt! KiTimerExpiration + 0x1be
  fffff880 '01e8db90 fffff800' 018b494a: fffff880 '01e65180 fffff880' 01e706c0 00000000 00000001' fffff800' 00000000: nt! KiRetireDpcList + 0 x 277
  fffff880'01e8dc40 00000000' 00000000: fffff880'01e8e000 fffff880 '01e88000 fffff880' 01e8dc00 00000000' 00000000: nt! KiIdleLoop + 0x5a
  
  
  STACK_COMMAND: kb
  
  FOLLOWUP_IP:
  Rdbss! RxTimerDispatch + 49
  fffff880'03bb05e9 45395830 cmp dword ptr [r8 + 30 h], r11d
  
  SYMBOL_STACK_INDEX: 3
  
  SYMBOL_NAME: rdbss! RxTimerDispatch + 49
  
  FOLLOWUP_NAME: MachineOwner
  
  MODULE_NAME: rdbss
  
  Nom_image: rdbss.sys
  
  DEBUG_FLR_IMAGE_TIMESTAMP: 54ac90b6
  
  IMAGE_VERSION: 6.1.7601.18711
  
  FAILURE_BUCKET_ID: X64_0xD1_rdbss! RxTimerDispatch + 49
  
  BUCKET_ID: X64_0xD1_rdbss! RxTimerDispatch + 49
  
  ANALYSIS_SOURCE: KM
  
  FAILURE_ID_HASH_STRING: km:x64_0xd1_rdbss! rxtimerdispatch + 49
  
  FAILURE_ID_HASH: {c5674c2a-abf0-8335-bd73-f6921423a27d}
  
  Follow-up: MachineOwner

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot apply the borough to Custom Properties

  When I try to apply a round feature to custom report properties, the value is empty.  When I disable the function rounded, it works.  Any ideas?

  $report = get-VM-name acme *-Server $vcenter |

  Select the name,

  ProvisionedSpaceGB,

  @{N = "vCenterServer"; E={$_. "Uid.Split(":") [0]." {{Split("@") [1]}},

  @{n = 'Cluster'; E = {}

  $rp = get-view $_. ExtensionData.ResourcePool

  $parent = get-view the $rp. Parent

  While ($parent - isnot [VMware.Vim.ClusterComputeResource]) {}

  $parent is get-view $parent. Parent

  }

  $parent. Name

  }} | Tri-objet vCenterServer |

  Group-object - property {$_.} Cluster} | Select @{n = "ClusterName"; E={$_. Name}},

  @{N = "vCenterServer"; E = {$vcenter. Name}},

  @{N = "VMCount"; E = {(get-vm-emplacement $_.)} {{Name) .count}},

  @{N = "AcmeVMCount"; E={$_. Group | Measure-object | {{Select - ExpandProperty County}},

  @{N = "VMsPerAcmeVM"; E = {math: [turn] (((get-vm-emplacement $_.))} Name) .count / ($_.) Group | Measure-object | {{(Sélectionnez-ExpandProperty Count)), 1)}}.

  Hello, TheVMinator-

  This is probably due to having the syntax a bit off.  Brackets (for the accelator type) go around the name of class .NET ("Math" in this case), rather than around the name of the static method of the class (in this case ' Round').  So who should be like:

  ...@{N="VMsPerAcmeVM";E={[Math]::round(((get-vm -location $_.Name).count / ($_.Group | Measure-Object | Select -ExpandProperty Count)),1)}}
  

  What to do better for you?

• Cannot apply the correction 7461070 during the upgrade to 11.5.10.2 to 12.1.1

  when I apply patch 7461070 according to step ((9. Apply AD 12.1.1 upgrade driver (required))) in Oracle® E-Business Suite
  Upgrade Guide, version 11i to 12.1.1, I could not understand what the database to connect to.
  I understand that this hotfix must be applied on the APPL_TOP 12.1.1
  but as I installed my 12.1.1 as option upgrade on my 11.5.10.2 CU2 with DB 10.2.0.4 installed as a single node, it didn't not create files of data on the database, so the database is not upward.
  and as you know, the fix requires the SYSTEM password.
  so, what should I do in this case?
  

  It connects to the 11i database. At this stage of the upgrade application services must be down and no user needs access to the system. Only the database and listener must be running

  HTH
  Srini

• Cannot use https wesites due to certificate error

  There was an update to Windows 7 and an update of Firefox 27 today. Unfortunately, I didn't do one at a time.
  First thing I noticed gmail was not correctly display the graphs in the chat window. Then the Firefox Add ons link check - did nothing, just display "Loading Data" and never do anything. I went the Add-ons for my Firefox and it displays the error message "this connection is Untrusted. You asked Firefox to connect safely to services.addons.mozilla.org, but we cannot confirm that your connection is secure. »
  and
  "services.addons.mozilla.org uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer) »

  There is no way to add a certificate exception, so I can't use the addons page. Other websites using the https protocol either do not display correctly or also display the error "this connection is untrusted". I've done almost all proposed on forums and FAQS: I have reset Firefox, I deleted the file cert8.db and other extension files in my profile. I started in safe mode, try a different profile. A clean installed Firefox 26, and I always get this error message.

  I've seen suggestions that had to do with a security installation, which I did not, could there be an equivalent of McAfee?
  I use a company computer and do not have control over the antivirus settings or the proxy.
  I had to install Chrome just to post this question as the button "Ask the question" did not at all on IE.

  Found the solution... Found in a place of info on authorities of certification and checked in Firefox, it turns out that those used by our company (Zscaler) was absent.
  I exported 3 Zscaler certificates of IE and then imported into Firefox. It's working now!

• query by applying the 9654987 patch

  I have a 11.1.0.7 instance RAC running on a 64-bit Linux environment!
  I am applying the patch 9654987 . But while checking prerequisit (CheckConflictAgainstOHWithDetail), I get the below output.
  Could someone please review the below output. I think, we cannot apply the patch due to a merge conflict and we must ask Oracle for a stamp of fusion. is it not?
  Or is it will remove/restore all the conflicting patches and allow me to apply this new patch 9654987 ?
  

  MYCSMR1 % $ORACLE_HOME/OPatch/opatch prereq CheckConflictAgainstOHWithDetail -phBaseDir ./9654987
  Invoking OPatch 11.1.0.8.2
  
  Oracle Interim Patch Installer version 11.1.0.8.2
  Copyright (c) 2010, Oracle Corporation.  All rights reserved.
  
  PREREQ session
  
  Oracle Home       : /u02/app/oracle/product/11.1.0.7/MYCSMR
  Central Inventory : /u01/app/oracle/oraInventory
     from           : /etc/oraInst.loc
  OPatch version    : 11.1.0.8.2
  OUI version       : 11.1.0.7.0
  OUI location      : /u02/app/oracle/product/11.1.0.7/MYCSMR/oui
  Log file location : /u02/app/oracle/product/11.1.0.7/MYCSMR/cfgtoollogs/opatch/opatch2011-10-05_05-36-43AM.log
  
  Patch history file: /u02/app/oracle/product/11.1.0.7/MYCSMR/cfgtoollogs/opatch/opatch_history.txt
  
  Invoking prereq "checkconflictagainstohwithdetail"
  
  ZOP-47: The patch(es) has supersets with other patches installed in the Oracle Home (or) among themselves.
  
  ZOP-40: The patch(es) has conflicts with other patches installed in the Oracle Home (or) among themselves.
  
  Prereq "checkConflictAgainstOHWithDetail" failed.
  
  Summary of Conflict Analysis:
  
  There are no patches that can be applied now.
  
  Following patches have conflicts. Please contact Oracle Support and get the merged patch of the patches :
  8635272, 9654987, 8682717, 9267903
  
  Following patches are not required, as they are subset of the patches in Oracle Home or subset of the patches in the given list :
  7643188, 8277580, 7719148, 7719143, 7627743, 7447559, 6991626, 6870937, 6768362
  
  Following patches will be rolled back from Oracle Home on application of the patches in the given list :
  8635272, 8682717, 9267903, 7643188, 8277580, 7719148, 7719143, 7627743, 7447559, 6991626, 6870937, 6768362
  
  Conflicts/Supersets for each patch are:
  
  Patch : 9654987
  
          Conflict with 8635272
          Conflict details:
          /u02/app/oracle/product/11.1.0.7/MYCSMR/lib/libserver11.a:/kcb.o
          /u02/app/oracle/product/11.1.0.7/MYCSMR/lib/libserver11.a:/kcl.o
  
          Bug Conflict with 8682717
          Conflicting bugs are:
          7409110
  
          Bug Conflict with 9267903
          Conflicting bugs are:
          6941717,  7494333,  7318049,  7122161,  6980601,  6970731,  7497788,  6059178,  7417614,  7460818,  7593835,  7462709,  7373196,  7013124,  7486595,  7044551,  6980597,  7432601,  7515779,  8328853,  7276960,  7311601,  7424804,  7511040,  7426336,  7183523,  7613481,  7013817,  7452373,  7013835,  6840740,  6900214,  6955744,  6882739,  8339352
  
          Bug Superset of 7643188
          Super set bugs are:
          7643188
  
          Bug Superset of 8277580
          Super set bugs are:
          8277580
  
          Bug Superset of 7719148
          Super set bugs are:
          7719148,  7393804,  7523787,  7189645,  7341598
  
          Bug Superset of 7719143
          Super set bugs are:
          6452375,  7499353,  6599920,  7527650,  7331867,  7345904,  7175513,  7719143,  7356443
  
          Bug Superset of 7627743
          Super set bugs are:
          7627743
  
          Bug Superset of 7447559
          Super set bugs are:
          7447559
  
          Bug Superset of 6991626
          Super set bugs are:
          6991626
  
          Bug Superset of 6870937
          Super set bugs are:
          6870937
  
          Bug Superset of 6768362
          Super set bugs are:
          6768362
  
  OPatch succeeded.
  
  rmpsdbs01!oracle (bash) /u02/storage/patches/CR412618

  Published by: 877343 on October 5, 2011 11:56

  -He will invite me to restore all these fixes when I run a command 'opatch apply?

  Yes, it will give an option with if you want to proceed with the installation

  -l' used it allows me to go away until and unless I get an amalgamation patch/remove these hotfixes manually?

  No it will allow you to move forward. You can install the overlay patches after you got their Oracle for this power supply

  I also checked the conflict patch 8635272 is available for 11.1.0.7.4 on your platform, while the other 2 conflicts are not available. I suggest you to raise a SR with Oracle's Support so that he can ask the overlay for other patches 2 conflicts

• apply the patch error - oraplp10.dll

  I am applying the patch and get the error again... Some files that need to be resettled by the oracle Universal Installer
  used by one or more running services. It contains a list of 30 services. All the oracle services are already shutdown.
  
  When I checked the log file for more details:
  D:\oracle\product\10.2.0\db_3\cfgtoollogs\oui\installActions2010-04-14_10-21-32AM.log
  
  INFO: Exception thrown from action: copyGroupFromJar
  Exception name: IOException2
  Exception string: error writing to the file "D:\oracle\product\10.2.0\db_3\bin\oraplp10.dll". [D:\oracle\product\10.2.0\db_3\bin\oraplp10.dll (the process cannot access the file because it is being used by another process)]
  The exception severity: 2
  WARNING: This stop all product installation and exit the installation program. Are you sure you want to stop the installation and exit?
  INFO: User selected: Yes/OK
  
  INFO: Set to warn the user with options to ignore the attempts of exception handling
  Choice of the user: the user chose to stop to install all components.

  The_Rock wrote:
  100% DONE :)
  Thanks Kamran Agayev Sir.

  A Question Mr President, what is the renamed file oraplp10.dll? Should I rename it to its original name?

  I hope that the new file with the same name is already copied. Just check the folder where it was copied

• "Word cannot complete the save due to a file permission error."

  I have Windows XP.  Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error."  I can always eventally the record via a temporary file, but it's very messy.  "A file permission error" - what on Earth is this?  And what should I do to get things to normal?     Ron Davis, Newcastle N.S.W..

  When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key.  A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen.  At this point, log in as any user with administrator privileges.  After successfully login, you should be able to right click on a folder or file and select "Properties".  When the Properties screen, you should have a 'Security' tab at the top.

  Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders.  (Start-> Run-> "cmd") and then you can use the cacls command.  The Calc command syntax can be found here:

  <>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >

  or you can type: cacls /?

  "Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.

  HTH,

  JW

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• I get an error saying "the BCM42RLY service failed to start due to the following error: the system cannot find the file specified. '.

  Log name: System
  Source: Service Control Manager
  Date: 17/07/2011-21:12:53
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: ivan-PC
  Description:
  The BCM42RLY service failed to start due to the following error:
  The system cannot find the specified file.
  The event XML:
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      203523
     
     
      System
      Ivan-PC
     
   
   
      BCM42RLY
      %%d Ko
   
  original title: can someone please help...

  Hello

  1. you are using a Dell computer?
  2. What is the model number of your computer?
  3. don't you make changes to your computer before the problem?

  BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.

  Uninstall or reinstall a device

• "An error has occurred applying security information to:...". The system cannot find the specified file. »

  So, this is what happened:

  I accidentally threw my wife laptop screen and I bought her a new. The laptop seems to be OK, but I couldn't see anything because of the broken screen.
  I bought a pen, took out the old HDD (Vista) and connect it to the speaker.
  Now I'm going through old files from my wife from the old HDD (Vista) on his new laptop (Win 7), but I can't access it.
  So I did a little web browsing and tried the following.
  Logged as administrator, open properties, Security tab, advanced, button tab owner, edit, changed ownership to myself (my wife) and verified replace the owner in the box of submarines.
  And then find a lot of mistakes. Everyone says ' an error has occurred applying security information to:
  Among these errors, half of 'em had "the system cannot find the file specified" and the other half had "access denied."
  In the end, there is a separate error that says: "unable to set new owner (folder). The system cannot find the specified file. »
  I would really appreciate the help.

  Hello

  Did you change your computer?

  I suggest that you first take ownership of the drive once you connect to the computer and check if it works.

  To take ownership of a folder

  (a) right click on the folder you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and then click the owner tab.

  (c) click on edit. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) click on the name of the person you want to give to the property.

  (e) If you want that person to be the owner of the files and subfolders in this folder, select the check box replace the owner of sub containers and objects .

  (f) click OK.

  I suggest you follow the links and check out them.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Error message when you change the security settings for a folder that contains a child object for which you have no access authorization: 'access denied '.

  http://support.Microsoft.com/kb/975702