outcome of the corruption of the bios HP g61 - 420 ca

Similar Questions

• Fix Corruption of the BIOS?

  Today, after awhile of use my laptop, I closed the lid to get up and do something. When I came back to the laptop, the screen was black. The WiFi light orange and the light caps lock blinked twice. I searched for a while and found that it probably means that the bios corruption. How would it happen? What can I do to fix this?
  
  Here is my configuration:
  
  HP ENVY 15 t-j100 Quad Edition Notebook PC (ENERGY STAR)
  
  E2E34AV
  
  -Windows 8.1 64
  -4th generation Intel® Core™ i7-4700MQ processor
  NVIDIA® GeForce® GT 740 M graphics with 2048 MB of video memory dedicated
  -15, 6-inch diagonal HD BrightView (1366 x 768) LED backlit
  -8 GB of DDR3 (1 Dimm) system memory
  -1 TB 5400 RPM hard drive
  -NO Cache on the hard drive of the WSSD acceleration
  -No additional desktop software
  -Software security testing
  -6-cell Lithium-Ion battery
  -External tray Super Multi 8 X DVD +/-RW w/Double layer
  Backlit keyboard-
  -HP TrueVision HD Webcam with integrated digital microphone
  802.11b/g/n WLAN [1 x 1]
  
  Thanks in advance.

  is your laptop still within its warranty period?

  Check the status of your warranty here.

  BIOS recovery

  http://support.HP.com/us-en/document/c02693833

  If you are unable to recover the BIOS using the methods described in the document from HP then your choice is tough enough.  You can have the motherboard replaced by HP service center or use a BIOS company to replace the CMOS chip with a new chip flashed with a proper BIOS ROM file.

• Corruption of the BIOS to the Satellite M40

  Hi all.

  I have an old laptop Toshiba Satellite M40 with damaged BIOS which of course does not start. TI powers drop down 3 sec after power, which means that it does not pass the test STATION. I understand various forum that it is not the competence of technicians ASP and I'm not ready to hear things like 'replace maother Board' of these guys.

  I heard talk about techniques that can reflash the BIOS in the CMOS memory using a floppy drive loaded with a version of BIOS.

  The computer is in pretty good condition, including a new 80 Gb HD and was working fine until I tried to update the BIOS. I think it should be fix and spend a few hours on it.

  Any ideas on the issue were greatly appreciated.

  Hello

  I'm afraid that you are ready to hear just a positive thing or what. Are you here to have the real discussion or you want to hear a fairy tale. You wrote in your ad that the BIOS is damaged. I guess that you know very well what should be done with pieces of damaged equipment.

  How you want to reflash the BIOS if your laptop is running in only 3 seconds. Please be serious.

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• DV6-6b90se: the bios recovery

  Hello there please help!

  How can I recover BIOS when corrupted and

  White screen; Caps lock will blink twice every 2/3 seconds with the orange wireless button.

  My laptop is HP pavilion dv6 (dv6-6b90se)

  I see. You will need to take the PC to a specialist to a computer repair shop. He could give you close to your problem.  He will take the chip from the BIOS of the laptop and write a new BIOS on the chip and then soldered to the motherboard.

• HP Envy 13-d053sa: update the bios

  When I rebooted my laptop today (10 June 2016), it displays a message saying that the BIOS has been updated but could not proceed because the machine was not connected. I plugged in and let it continue. Now my fingerprint reader stopped working again!... I had to re - load Win10 recently to make it back after a corruption of the registry and I don't want to have to re - load again so what can I do to recover my fingerprint reader? Thank you.

  Solved.

  I went to the control panel and the updated driver, and now it works again.

• L50-A-19N satellite will not start in the BIOS

  Hello

  I have a problem with my laptop.
  I have installed 8.1 and fedora 20 windows.

  I was in fedora, when I decided to restart Windows.
  Instead of grub, I saw message with the error and my notebook has stopped booting.

  I pressed the power button / stop, he died but when Im trying to start it again, I see the logo of Toshiba Leading Innovation and that's it.

  It will not start any further.
  I decided to get my system, but when I press F2 or F12, nothing happens.
  I can't get into the BIOS!

  Please, help me to solve it.

  Somehow, this seems really strange
  I m wondering why you are unable to access the BIOS

  What you can try to do is, remove the laptop HARD drive and switch on and press F2.
  From my point of view of the rare even if the isn't HARD drive connected, you should be able to access the BIOS.

  But for Pierre, I'm not very well your laptop problem is related to the faulty / corrupt Boot partition m

  However, your comments would be greatly appreciated

• Tecra S2 with WinXP: cannot download the BIOS

  I downloaded the most recent BIOS drivers for the S2 model, but I can't do this update because the file is corrupted.
  Is the link where the support pages push me

  Can someone help me pls? Davide (Italy).

  Thank you to

  NA? t know what you mean.

  I checked the BIOS for Tecra S2 on the European driver Toshiba page and I was able to download it!
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Please check againa? ¦. AI? sure it'll work ;) m

  Concerning

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO

• Satellite A100 - 803 (PSAANE) - Trouble updating the BIOS in Vista

  Hello

  I tried to update the BIOS on my laptop today. After the installation of the new BIOS, restarted the pc and then it showed a black screen with white display text material in the machine.

  In the end, it says something about a corrupt CMOS. She said press F1 to default or F2 for Setup.

  I pressed F1.

  The thing is that I don't know if it worked. I used a program to display the bios version and it seems up to date, but the CMOS thing me freaked out.

  I met all of the planned maneuvers (AC adapter / CC plugged etc.) except in startup mode. I assumed that the boot mode is currently in the standard vista desktop.

  * What is this thing of startup mode? * It's driving me crazy. I searched the forums, google and nothing. How can I get the computer to "boot mode and not recovery mode" as the tutorial says.

  I intend to reinstall the BIOS as soon as I know how to enter in the boot mode.

  I think that this announcement has already answered in this thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=122727#122727

  You're talking about the traditional BIOS update, but the fact is that on the Toshiba driver page you will find ONLY the base BIOS update windows.
  All new BIOS updates are versions of WIN and can be updated only running a Windows operating system.

  In the BIOS, the package should be unzipped everything first, and then an .exe file must be run.

  That s all ;)

• Satellite A200 (PSAE0C-AH308C) - after the BIOS black screen update

  Hello

  I have a Toshiba Satellite (model No. A200; Part No. PSAE0C - AH308C) and to install Windows XP on a version already corrupted Vista (which had 4 partitions, that have been corrected, erased, then reformatted in a solid block). Now, I have installed all the appropriate drivers off Toshiba Canada support site...

  Everything worked, but I wanted to see in Windows (since I just got this computer) if everything was in place and working normally until I installed Ubuntu... Then I did the update to the BIOS flash. The program is supported in two formats, one for Vista and one for XP... for XP has a more high at 5.20 and Vista BIOS version the 1.80 revision of BIOS... that are marked as being updated by the Toshiba site. I opted to download the latest version of the BIOS.

  Things got ugly as soon as I unzipped the self-extracting program. First of all he said he could not find a .dll file (even if it is clear from there), so that seemed as if it started to Flash the BIOS but has not finished (it was just what happened when I opened the program)... I think he got to the ROM of compensation but did not have any code in there... Windows attempted to close the program because he did not respond, and I tried to take the program... had the same .dll error, but this time, the screen of the program was just gray...

  Given that this program is not Flash the BIOS unless the user selects the button "Flash BIOS", I have reason to believe that it was a bug in the program, or a combination of it and Windows comes to interfere (no program were running at the time, while he was supposed to be a dedicated flash). I can only flash in the Win.

  Now, I rebooted the computer, twice... the screen turns black, the HARD disc spins, the DVD drive has done his usual clicking sound when the computer starts, but it seems to stop as there is no BIOS entact.

  Can I replace the BIOS chip? There is no way for me to access the BIOS at all.

  Thanks for any help on this

  Thank you & best regards

  Muhammad Asif
  Manager

  THE COMPUTER HUT

  Center of the screen:
  F-115 trade place treat Saddar Karachi.
  Branch:
  G-31 place of trade treat Saddar Karachi.
  Headquarters:
  711-712 treat Trade Square Saddar Karachi.

  Tel: (+ 92-21) 2765359, 2734131 (Ext) 601
  Fax: (+ 92-21) 2724968
  Cell: + 92346-3277193
  E-mail: [email protected]

  Hello

  Unfortunately, the BIOS update has failed and now BIOS is damaged. For this reason, you cannot start and use your laptop. I agree with Luke. Please contact nearest Toshiba authorized maintainer and ask for help. Talk with them and I am sure that you will find the best solution to this problem.

  Satellite A200 is quite long on the market and it is hard to believe that updating the BIOS on the Canadian page may have a bug. All updates are tested and used by millions of users and service providers. If there is something wrong, I do not believe that this update will be available on the page of public support.

  In any case, contact the nearest service provider and explain the situation. Believe me this is the best thing you can do now.

  Good luck!

• Re: Satellite A100-803 PSAANE won't start no-glued on the Bios POST

  Hello

  I have the following problem with a laptop computer to a customer.
  After having turned it on, it has the logo Toshiba rest on and everything is hanging there.

  After pressing ESC, there is a message: "NO TPN or TPN has problem.
  So, I think that the Bios broke down. How, I don't know.

  Trying to enter in the setup by pressing F2 system displays "enter the configuration" but nothing happens. He stayus on this screen.
  Is there a solution I can try to recover the Bios damaged from a USB or a USB floppy drive.

  I checked the Toshiba support site, there is a Bios Update, but it is a program that should be started in Windows so I can't use it.
  Anyone have an idea how I can recover the corrupted Bios.
  I have already removed the battery and the power and hold the powerbutton to for +-30 sec, but that does not solve the problem.

  Thanks for help out me.

  Best regards

  Cauberghe Didier
  Dealer.

  Hello

  You are right. There are, it's no BIOS which can be not started BOF on floppy or USB key.
  You must update the BISO running windows OS.
  But according to your message, it is not possible.

  If you have no alternative but to contact the maintainer authorized Toshiba in your country.
  Guys should be able to help you. I presume that the technicians have access to the traditional BIOS version that can be updated using a disk.

  Good

• Re: Satellite A200-1AX does not start after the BIOS update

  Hi all!

  I wanted to install XP on a Satellite A200-1AX.
  So I tried to update the Bios to the version that supports supported XP.

  When I tried to install it, crashed Vista and now the laptop won't even turn on.

  When I keep the power button pressed, the whistling fan but nothing happens.
  I think the BIOS is gone or corrupted.

  What should I do?
  Thanks in advance for any help!

  > When I keep the power button pressed, the whistling fan but nothing happens. I think the BIOS is gone or corrupted. What should I do?

  What to say to boyfriend. It seems that something was wrong during the process of updating the BIOS maybe the BIOS was not written correctly and the ROM module must be flashed again with the help of a special procedure and the tool.

  In this case, you can do anything you will need to contact the ASP in your country for a fix!

  Don t waste time and ask a technician for assistance.

  Good luck and best regards

• Update the BIOS and features on Satellite A60-682

  I have experienced a massive fall in my laptop.
  I tried to run the Toshiba Recovery disk and I also tried to format the drive with the XP installation CD. However, any attempt to recover the laptop (or even clean it and install it from scratch) have failed.
  From the looks of it, it would be that the BIOS is corrupted (probably due to a virus).

  This is why I would like to reinstall the latest version of the BIOS to see if I can overcome this problem.

  I went through for a few hours but could ' t, find a download for my laptop. It is a model of serias Satellite A60 (SA60-682). Any chance that you could - can someone provide me with the latest version of BIOS for this model?

  Thank you
  Genetic resources organization

  Traditional BIOS (in charge of the disk or disk drive):
  http://support.toshiba-tro.de/tools/BIOS/satellite/A60/Trad/BIOS-190trad.zip

  There is also a Windows based bios (you can run it directly on windows if your windows does not work)

  General update of the bios information:
  http://www.toshiba-tro.de/biosinfo