Cannot assign point values to application using HREF

Similar Questions

• Error ESTK "cannot assign a value.

  Dear friends, started a new project - and of course the new problems:.

  The SumOf (list of values) function works perfectly,

  but an equivalent of the function VsumOf (list of variables) stops at line 16 in the first iteration of the loop: cannot assign a value.

  At this point, the result variable is just - 132.09 - out sort of a numerical problem.

  var z = SumOf (11.1, -11.9, 12345679.0, -12345679.0, 124.5, -17, 18.9, 2.2, 2.5, 2.5, 2.5, 31.31, 312345679, -312345679); 
  alert ("SumOf the numbers = " + z); // giving 166.610000014305  (figures after the 000 are artifacts)
  
  var z = VsumOf (11.1, -11.9, 12345679.0, -12345679.0, 124.5, -17, 18.9, 2.2, 2.5, 2.5, 2.5, 31.31, 312345679, -312345679); 
  alert ("VsumOf the numbers = " + z);
  
  function VsumOf (valuePairs) {
    var nArguments = arguments.length;
    var j, z, result = 0;
    if (Math.floor(nArguments/2) * 2 !== nArguments) {return undefined;}
    
    for (j = 0; j < nArguments; j=++2) {
      if (isNaN(arguments[j])) {return NaN;}        // should be skipped in calling environment
      if (isNaN(arguments[j+1])) {return NaN;}
      z = arguments[j] * arguments[j+1];
      result = result + z;                          // <<== Can not assign value ???
    }
    return result;
  }
  
  // this one works correctly
  function SumOf (values) {
    var nArguments = arguments.length;
    var j, result= 0;
    for (j = 0; j < nArguments; j++) {
      if (isNaN(arguments[j])) {return NaN;}        // should be skipped in calling environment
      result = result + arguments[j];
    }
    return result;
  }
  

  Any ideas what really does this error message mean?

  Hi Klaus,

  Just change your line 12 for

  for (j = 0; j< narguments;="" j="j+2)" {="">

  It should work.

• Set a value of Application using PL/SQL element

  I have a question of enforcement F101_MAINTENANCE it needs is the value set according to the values in a table. The value would be a piece of HTML code.
  
  Ideally this would be verified every time that a page is loaded and the value is printed on the screen on every page.
  
  Is there a way to do this?
  
  I use 4.0.2 on 11g

  Hi Craig,.

  To set an application using PL/SQL item value:

  // some examples
  :F101_MAINTENANCE := 'some value';  // a varchar
  :F101_MAINTENANCE := 123;           // a number
  :F101_MAINTENANCE := SYSDATE;       // a date
  

  The varchar 'some value' could be HTML and could be HTML with the values of a table concatenated, like this:

  DECLARE
     l_ename VARCHAR2(100);
  BEGIN
     SELECT ename INTO l_ename
     FROM emp
     WHERE empl_id = 123;
  
     :F101_MAINTENANCE := 'Empl name: ' || l_ename || '';
  END;
  

  (Take the space out of the style attribute - it's just there because the forum keeps style stripping attribute when displaying the post values.)

  This could be in a process of page to fire when the page loads. If she has to work for all pages, it could be in an application process set on fire during the loading of each page. If it should work for all but a few pages, you can place the code in an application process on fires during each page load, but then put a condition on it so it is not fire for specific pages.

  Now that the application is defined, it can be used on the pages where you need. If it is used for display only, remember to not escape special characters, or else it will just display the HTML rather than surrender. And if the value of the element of the application only needs to be set in PL/SQL, be sure to set the protection of session state so that he can "Restricted - cannot be resolved in the browser.

  Hope this helps,
  John

  If you find this information useful, please indicate the 'useful' or 'correct' post so that others benefit. *

• Scene 1, Layer 'as', image1, 24 1050 line: cannot assign a value without reference.

  I'm doing a flash with the site automatically resizes to fit the users browser. the code I used is:

  function init()
  {

  internship. Align = StageAlign.TOP_LEFT;
  stage.scaleMode = StageScaleMode.NO_SCALE;

  stage.addEventListener (Event.RESIZE, updateSize);
  stage.dispatchEvent (new Event (Event.RESIZE));

  myBackground.x = 0;
  myBackground.y = 0;

  }

  init();

  function updateSize(e:Event)
  {

  myBackground.width = stage.stageWidth;
  myBackground.height = stage.stageHeight;

  myContent.x = stage.stageWidth/2 = myContent.width/2;
  myContent.y = stage.stageHeight/2 = myContent.height/2;
  }

  I get the error "cannot assign to a reference no valeur.*."

  Well, you need to determine what you want to be the basis for defining the sizes and assign each separately.

  You cannot: "something = an equation = an equation" that you have

  (curious - because your iPhone automatically tag on this introductory text "sent from"?)

• cannot copy / paste of the application using jinitiator 1.1.8.16

  Hi all
  
  I use the oracle application which loads in the browser with the help of jinitiator 1.1.8.16, my browser is IE 6.0, Application works fine but the problem is that I can not do operations such as copy and paste, except the copy of the application and the dough works on the whole of the system, can someone please help me solve this problem.
  
  We thank you in advance who will help me to solve this problem.
  
  Kind regards
  Phani Kumar. B

  Phani,

  JInitiator has Nothing to do with JDeveloper. You can try the forms Forum.

  John

• How to assign the value to the application-level element

  Hello

  I'm learning to APEX.  I use version 4.2.6.

  My question is, I set a text field called 'FINANCIAL_YEAR' in the login page.  I wanted to know how to assign this value to a text element of Application level (on page sent), so that I can get this value through at my request.

  Thank you

  -Anand

  anand_gp wrote:

  Yes, I created a 'text area' under 'HTML' in the 'Home' page  Who accepts the exercise of a table through LOV.  I intend to assign this value to a global variable so that this variable can be read in any of the application to filter the result set from different tables (not yet built the rest of the application).  To do this, I was intending to use "Shared components"-> "Elements of Application".  I'm still not quite sure how it works.

  Start by reading the documentation on elements of application.

  Go to the shared components > Application parts and create your G_FINANCIAL_YEAR item. Value Session State Protection Restricted - can not be set the browser so that the value is not editable by the user, falsification of URLS or scripts.

  On the home page, if there is not already a button to submit the value of the fiscal year, add one in the HTML area, with the Action as a submit Pageclick. Otherwise, you can do without the button and using submit Page in Page Action when the changed value select the parameter in the list so he can undergo.

  Then, in the section of the Page processing, create a calculation:

  Point Type: Application-level element

  Calculate Item: Application: G_FINANCIAL_YEAR

  Point calculation: After submit

  Type of calculation: Value of the element

  Calculation:

  Run the application, select a value in the list of the fiscal year and submit the page. Review of current session state in the viewer of session state by clicking on the link of Session in the toolbar developer. Select the Elements of Application in the view list, and then click set. The element of your application and its current value must be visible. You can now reference value throughout your application by using the appropriate syntax.

  You should also consider if a default value (for example the current year) using a calculation Application from the point of calculation on the new Instance and coordinate the application point and part of the homepage using point application as the Source of value or an expression with Source page element, the value always, replacement of value that exists in the session state.

• The assignment of value to an element of Application via JS

  Hi guys,.
  
  I am trying to assign a value to an element of application using javascript. But I can't do that when I try to view with alarm the result is empty. You have an idea how can I assign a value to an element of the application using javascript?
  
  Another yew (action is "ASSIGN")
  {
  var moname = $(el).children("td[headers='SOURCE']").text ();
  $s ('F10_SELECTED_OBJ', moname);
  Alert ($v ('F10_SELECTED_OBJ'));
  }
  
  Thank you

  You cannot reference elements of apex in javascript application because they are not rendered in the HTML DOM.

  See what {message identifier: = 10343221}

• Cannot install point. Restart the application and re-download your purchase.

  We have an application published with two folios in there. Several users have complained that when they try to update the app, they get this error: "cannot install point. Please restart the application and download your new purchase. "I have NOT been able to reproduce this error on 4 different iPads. However, I have 3 users who receive this error whenever they try to update the folio.

  They tried to remove the app and reinstall. The same problem.

  They tried several different WiFi FORT connections, same problem.

  A user came to my office. We have updated the app on my iPad. Worked well. Tried it on his iPad. Got the error. Same WiFi connection within minutes following one another.

  What is going on?!!!

  Adobe has released a series of patches for viewers to iOS to handle this problem, you have described. V31 V32 these patches and are in need of an update. Knowing that your application is v29, v32 app you just submit you should be fine.

• assign a value to a text element using the PL/SQL function body

  Hello
  
  I want to assign a value to a text element using PL/SQL function body option in the Source elements. But the below error when I try to apply it.
  
  Source code:
  
  declare
  name varchar2 (100);
  Start
  If v ("P3_CREHIDD") = 'Edit' then
  Select ename in the name of cpy_emp where empno = v('P3_EMPNO2');
  
  end if;
  end;
  
  
  ERR-1904 unable to calculate the default item: type = computation_type = function body declare name varchar2 (100); so start v ('P3_CREHIDD') = 'Edit' and then select ename in the name of cpy_emp where empno = v('P3_EMPNO2'); end if; end;.
  
  Thank you
  David.

  Hello

  Your body of the function doesn't return anything.
  Maybe it works

  declare
    l_name varchar2(100);
  begin
    if v('P3_CREHIDD') = 'Edit' then
      select ename
      into l_name
      from cpy_emp
      where empno = v('P3_EMPNO2');
    end if;
    RETURN l_name;
  end;
  

  BR, Jari

• Assign the value to the Application Variable via javascript

  Hello
  
  How can I assign value to an element of the application (not the page element) through javascript.
  
  I tried to assign the value as follows:
  
  $s ('F150_REGION_TEMP', region);
  
  where F150_REGION_TEMP is the application variable and 'region' is populated value in javascript.
  
  Kind regards
  Benz

  Hello

  Try

  BR, Jari

  Published by: jarola on March 1st, 2010 14:47

• Access to the value of the application using javascript

  How can we access the value of the APPLICATION using javascript? I tried $x ('REQUEST'), but it does not work.
  
  Thank you

  Hello

  If you use & ASK. (including the & and the.) in your javascript directly it will be replaced by Apex with the value of the actual demand

  Andy

• Cannot log on to the application designer using id PS while able to connect in data mover.

  Hello
  
  I install peopletool 8.50 (HRMS). I ran successfully all the sql scripts. Run the script DMS as well for the demo database.
  
  When I try to log in the designer of the application using PS/PS I get the following error...
  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 404 - ORA-01017: name of user and password invalid. connection refused
  
  while I am able to connect in data mover on Starter bracelet. Can someone help me pls?

  Using Oracle 11 g?

  This could be your problem, SEC_CASE_SENSITIVE_LOGON:
  http://bloggingaboutoracleapplications.org/PeopleTools-and-Oracle-11g-installation-issues/

• How to assign a value of the element from page to main page in the column element when Cre

  I have a form build on table T1. The T1 has a primary key defined (T1PK) and four other columns (C1 - C4). I have a form in this table. This form accepts the values of C1 to C4 and displayis an extra point, is not based on columns of T1 - P1_DUMMY. The form for T1PK element has the value "hidden and protected.
  When creating the form, I wanted that the value of the primary key (T1PK) will be obtained through existing trigger. I want to use the value stored in the page called "P1_DUMMY" for P1_T1PK.
  
  No matter what I do, I always get this error when I hit the button 'CREATE' on the page of the form:
  
  ORA-01400: cannot insert NULL into ('DEV'. "" T1 ". ("' T1PK")
  
  The Create button is a condition not to show if the the P1_T1PK page element is NULL. I created page rendering process, the process of transformation of page like this bock of PL/SQL:
  
  : P1_T1PK: =: P1_DUMMY
  
  But I still get ORA-01400. The form has the P1_DUMMY as display only, not not to store the State, so I can see that the P1_DUMMY element has the value I want (2).
  
  How to assign the value stored in P1_DUMMY in P1_T1PK when I click on the button CREATE on this form?
  
  Thank you for your time.
  
  Daniel

  Hello
  The belief question is the way in which the calculation is being defined. You are not using the &. rating (dot ampersand) in PL/SQL and SQL.

  Try this.

  1 define the calculation on P1_T1PK of Type calculation of value of the element
  2. on the next page to load textarea, enter P1_DUMMY. No. colon or &
  3. give appropriate conditions

  Kind regards

• Capture engine pointer to external application

  Hello

  I need a program to change a Global sequence running. Simplify, I need to change a Boolean Global with an external application (in c#). If someone has done something similar, I would like to know how.

  So far, ive tried to save the object pointer in the configuration file, through TestStand and an another c# application, but it was not good because it save it as an object com I now try to use Remote Access Services to launch a service (with the current engine) with TestStand so my application can communicate with the engine via remote access.

  I tried my client-server without TestStand and works very well, but I can't grow if I run the application server through TestStand.

  I know more ways to capture the pointer of the engine... Any idea?

  Daniel

  Probably the best thing to do would be to use a queue of TestStand or notification for transmitting data between processes. Using the step type, if you start the name of a queue with a ' *' character then the queue will be global for the entire machine. To access the queue of your external application programmatically, create an instance of the teststand engine and call GetSyncManager() on this topic with the name of your queue (i.e. it must begin with a ' *' character). Then use synchronization to TestStand API with returned Synchronization Manager Manager to get the existing queue and access. Notifications can also pass data and can be used in the same way. You can store the global variable itself by reference to the queue and get the external application using Dequeue in a TestStand object reference variable (pass false for the Microsoft.SqlServer.Management.Sdk.Sfc.ISfcCollection.RemoveElement parameter so that it remains in the queue for the life of the queue). See the teststand help file for Synchronization Manager and the queue of API information. You can create a TestStand object reference variable to store the corresponding element using Engine.NewPropertyObject (). Then once there, simply call GetValueInterface and access the value returned as a PropertyObject himself.

  Hope this helps,

  -Doug

• When Microsoft Excel loads the following error occurs: Error 1406 Setup cannot write the value in the \xlsx registry key.

  I have Windows XP on a PC, I bought at the beginning of 2009.  I have been using Microsoft Office applications with no problems until now.  When I try to open Excel, the following events occur: 1) a presentation box appears and poster - "Please wait while the window configures Microsoft Office Home and Student 2007.  Collection of the required information.   2nd) another box displays the following message: Error 1406 Setup cannot write the value in the \xlsx registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, see PSS10R. CHM.
  3rd, the next area said cancel, start over or ignore.   Retry and ignore just redisplays the same message box again.  When I click Cancel, the following error message is displayed - fatal error during installation.   I do not understand why this is happening since 1) I've been using Excel for quite a while and 2) I'm not trying to install office as it was installed on my PC when it came from the manufacturer (Dell).  Also, I have no problem with the opening of other Office programs.  I am the only user on this computer.  Help, please!  Thank you, Dennis

  Okie dokie.

  Well I dug on the web and found someone with the same problem, and they said that when they have disabled "McAfee VirusScan 8.5 Access Protection", this error has disappeared. If this applies to you, give it a whirl if you wish.

  But the best support that I found came from this website: http://support.microsoft.com/kb/838687. The jist of it is (trying to fix it yourself):
  Fix it myself to fix this problem yourself, follow these steps:

  1. Log the computer by using an administrator user account.
  2. Start Microsoft Windows Explorer.
  3. On the Tools menu, click Folder Options.
  4. Click the view tab.
  5. Under hidden files and folders, click Show hidden folders and files.
  6. Clear the Hide extensions for known file types check box, and then click OK.
  7. Open the following folder: C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data\
  8. If you are running Office 2003, right-click Opa11.dat, and then click Properties. If you are running Office XP, right-click Data.dat, and then click Properties.
  9. Click the Security tab.
  10. Click Advanced.
  11. Click the permissions tab.
  12. Click to select everyone in the list entered permissions and then click change.
  13. Click to select the full control check box.
  14. Click OK three times. If these steps do not resolve this issue, delete the Opa11.dat file or the Data.dat file in the following folder and then restart an Office 2003 program or an Office XP program:
      C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data

      If this does not work for you, I would take my installation CD< completely="" uninstall="" microsoft="" excel="" (or="" any="" other="" problems="" that="" are="" giving="" you="" this="" error),="" then="" install="" microsoft's="" windows="" installer="" cleanup="" utility="" (which="" completely="" removes="" all="" stuff="" pertaining="" to="" whichever="" program="" you="" delete,="" for="" you,="" excel)="" and="" then="" reinstall="" microsoft="" excel.="" this="" utility="" program="" is="" really="" powerful,="" and="" you="" can="" download="" your="" copy="" from="">http://support.microsoft.com/kb/290301.

      So, here are three options for you to try. I hope one works for you - let me know it to be.

  -Carson

  P.S. - KC Chiefs? Colts all the way! :)